[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <OF0FD6EB50.C92AD6D4-ON482583FB.00285AB8-482583FB.0029CAB7@mxic.com.tw>
Date: Wed, 15 May 2019 15:36:29 +0800
From: masonccyang@...c.com.tw
To: "Miquel Raynal" <miquel.raynal@...tlin.com>
Cc: bbrezillon@...nel.org, broonie@...nel.org,
christophe.kerello@...com, computersforpeace@...il.com,
devicetree@...r.kernel.org, dwmw2@...radead.org,
geert@...ux-m68k.org, juliensu@...c.com.tw, lee.jones@...aro.org,
liang.yang@...ogic.com, linux-kernel@...r.kernel.org,
linux-mtd@...ts.infradead.org, linux-spi@...r.kernel.org,
marcel.ziswiler@...adex.com, marek.vasut@...il.com,
mark.rutland@....com, paul.burton@...s.com, richard@....at,
robh+dt@...nel.org, stefan@...er.ch, zhengxunli@...c.com.tw
Subject: Re: [PATCH v3 4/4] dt-bindings: mfd: Document Macronix MX25F0A controller
bindings
Hi Miquel,
> > +Macronix MX25F0A MultiFunction Device Tree Bindings
> > +----------------------------------------------------
> > +
> > +MX25F0A is a MultiFunction Device with SPI and raw NAND, which
> > +supports either spi host controller or raw nand controller.
>
> Acronyms in plain English should be in upper case.
okay, will fix.
> > +Example:
> > +
> > + mxic: mx25f0a@...30000 {
> > + compatible = "mxic,mx25f0a";
> > + reg = <0x43c30000 0x10000>, <0xa0000000 0x4000000>;
> > + reg-names = "regs", "dirmap";
> > +
> > + /* spi */
> > + clocks = <&clkwizard 0>, <&clkwizard 1>, <&clkc 15>;
> > + clock-names = "send_clk", "send_dly_clk", "ps_clk";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + flash@0 {
> > + compatible = "jedec,spi-nor";
> > + reg = <0>;
> > + spi-max-frequency = <25000000>;
> > + spi-tx-bus-width = <4>;
> > + spi-rx-bus-width = <4>;
> > + };
> > +
> > + /* nand */
> > + nand-ecc-mode = "soft";
> > + nand-ecc-algo = "bch";
> > + nand-ecc-step-size = <512>;
> > + nand-ecc-strength = <8>;
>
> Any reason to enforce 512B/8b correction? Why not letting the core
> choose for you depending on the NAND chip's requirements?
>
I thought here is just a raw NAND DTS example.
Will remove it.
>
> Anyway, I think you can have only one or the other (NAND or SPI), not
> both, and you probably should have a compatible or a property to tell
> the kernel which one you are using, right?
>
yes, you are right.
New DTS is bellow.
-------------------------------------------------------------------------->
Macronix Flash Memory Controller Device Tree Bindings
-----------------------------------------------------
Macronix Flash Memory Controller supports serial and raw Flash, including
NOR and NAND Flash for high throughput and low pin count applications.
It's a MultiFunction Device which supports either SPI host controller or
raw NAND controller.
Required properties:
- compatible: should be "mxic,mfd"
- reg: should contain 2 entries, one for the registers and one for the
direct
mapping area in SPI mode.
- reg-names: should contain "regs" and "dirmap"
- interrupts: interrupt line connected to this controller
- SPI:
- #address-cells: should be 1
- #size-cells: should be 0
- clock-names: should contain "ps_clk", "send_clk" and
"send_dly_clk"
- clocks: should contain 3 entries for the "ps_clk", "send_clk"
and "send_dly_clk" clocks
- Raw NAND:
- nand-ecc-mode = "soft";
- nand-ecc-algo = "bch";
Example:
- SPI mode:
mxic: mxic-mfd@...30000 {
compatible = "mxic,mfd";
reg = <0x43c30000 0x10000>, <0xa0000000 0x4000000>;
reg-names = "regs", "dirmap";
clocks = <&clkwizard 0>, <&clkwizard 1>, <&clkc 15>;
clock-names = "send_clk", "send_dly_clk", "ps_clk";
#address-cells = <1>;
#size-cells = <0>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
};
};
- Raw NAND mode:
mxic: mxic-mfd@...30000 {
compatible = "mxic,mfd";
reg = <0x43c30000 0x10000>, <0xa0000000 0x4000000>;
reg-names = "regs", "dirmap";
nand-ecc-mode = "soft";
nand-ecc-algo = "bch";
};
---------------------------------------------------------------------<
thanks for your review.
best regards,
Mason
CONFIDENTIALITY NOTE:
This e-mail and any attachments may contain confidential information
and/or personal data, which is protected by applicable laws. Please be
reminded that duplication, disclosure, distribution, or use of this e-mail
(and/or its attachments) or any part thereof is prohibited. If you receive
this e-mail in error, please notify us immediately and delete this mail as
well as its attachment(s) from your system. In addition, please be
informed that collection, processing, and/or use of personal data is
prohibited unless expressly permitted by personal data protection laws.
Thank you for your attention and cooperation.
Macronix International Co., Ltd.
=====================================================================
============================================================================
CONFIDENTIALITY NOTE:
This e-mail and any attachments may contain confidential information and/or personal data, which is protected by applicable laws. Please be reminded that duplication, disclosure, distribution, or use of this e-mail (and/or its attachments) or any part thereof is prohibited. If you receive this e-mail in error, please notify us immediately and delete this mail as well as its attachment(s) from your system. In addition, please be informed that collection, processing, and/or use of personal data is prohibited unless expressly permitted by personal data protection laws. Thank you for your attention and cooperation.
Macronix International Co., Ltd.
=====================================================================
Powered by blists - more mailing lists