[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190515090723.028277190@linuxfoundation.org>
Date: Wed, 15 May 2019 12:51:58 +0200
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Kai-Heng Feng <kai.heng.feng@...onical.com>
Subject: [PATCH 4.4 011/266] USB: Add new USB LPM helpers
From: Kai-Heng Feng <kai.heng.feng@...onical.com>
commit 7529b2574a7aaf902f1f8159fbc2a7caa74be559 upstream.
Use new helpers to make LPM enabling/disabling more clear.
This is a preparation to subsequent patch.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@...onical.com>
Cc: stable <stable@...r.kernel.org> # after much soaking
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
drivers/usb/core/driver.c | 12 +++++++++++-
drivers/usb/core/hub.c | 12 ++++++------
drivers/usb/core/message.c | 2 +-
drivers/usb/core/sysfs.c | 5 ++++-
drivers/usb/core/usb.h | 10 ++++++++--
5 files changed, 30 insertions(+), 11 deletions(-)
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -1888,7 +1888,7 @@ int usb_runtime_idle(struct device *dev)
return -EBUSY;
}
-int usb_set_usb2_hardware_lpm(struct usb_device *udev, int enable)
+static int usb_set_usb2_hardware_lpm(struct usb_device *udev, int enable)
{
struct usb_hcd *hcd = bus_to_hcd(udev->bus);
int ret = -EPERM;
@@ -1905,6 +1905,16 @@ int usb_set_usb2_hardware_lpm(struct usb
return ret;
}
+int usb_enable_usb2_hardware_lpm(struct usb_device *udev)
+{
+ return usb_set_usb2_hardware_lpm(udev, 1);
+}
+
+int usb_disable_usb2_hardware_lpm(struct usb_device *udev)
+{
+ return usb_set_usb2_hardware_lpm(udev, 0);
+}
+
#endif /* CONFIG_PM */
struct bus_type usb_bus_type = {
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -3117,7 +3117,7 @@ int usb_port_suspend(struct usb_device *
/* disable USB2 hardware LPM */
if (udev->usb2_hw_lpm_enabled == 1)
- usb_set_usb2_hardware_lpm(udev, 0);
+ usb_disable_usb2_hardware_lpm(udev);
if (usb_disable_ltm(udev)) {
dev_err(&udev->dev, "Failed to disable LTM before suspend\n.");
@@ -3164,7 +3164,7 @@ int usb_port_suspend(struct usb_device *
err_ltm:
/* Try to enable USB2 hardware LPM again */
if (udev->usb2_hw_lpm_capable == 1)
- usb_set_usb2_hardware_lpm(udev, 1);
+ usb_enable_usb2_hardware_lpm(udev);
if (udev->do_remote_wakeup)
(void) usb_disable_remote_wakeup(udev);
@@ -3444,7 +3444,7 @@ int usb_port_resume(struct usb_device *u
} else {
/* Try to enable USB2 hardware LPM */
if (udev->usb2_hw_lpm_capable == 1)
- usb_set_usb2_hardware_lpm(udev, 1);
+ usb_enable_usb2_hardware_lpm(udev);
/* Try to enable USB3 LTM and LPM */
usb_enable_ltm(udev);
@@ -4270,7 +4270,7 @@ static void hub_set_initial_usb2_lpm_pol
if ((udev->bos->ext_cap->bmAttributes & cpu_to_le32(USB_BESL_SUPPORT)) ||
connect_type == USB_PORT_CONNECT_TYPE_HARD_WIRED) {
udev->usb2_hw_lpm_allowed = 1;
- usb_set_usb2_hardware_lpm(udev, 1);
+ usb_enable_usb2_hardware_lpm(udev);
}
}
@@ -5416,7 +5416,7 @@ static int usb_reset_and_verify_device(s
* It will be re-enabled by the enumeration process.
*/
if (udev->usb2_hw_lpm_enabled == 1)
- usb_set_usb2_hardware_lpm(udev, 0);
+ usb_disable_usb2_hardware_lpm(udev);
/* Disable LPM and LTM while we reset the device and reinstall the alt
* settings. Device-initiated LPM settings, and system exit latency
@@ -5526,7 +5526,7 @@ static int usb_reset_and_verify_device(s
done:
/* Now that the alt settings are re-installed, enable LTM and LPM. */
- usb_set_usb2_hardware_lpm(udev, 1);
+ usb_enable_usb2_hardware_lpm(udev);
usb_unlocked_enable_lpm(udev);
usb_enable_ltm(udev);
usb_release_bos_descriptor(udev);
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1185,7 +1185,7 @@ void usb_disable_device(struct usb_devic
}
if (dev->usb2_hw_lpm_enabled == 1)
- usb_set_usb2_hardware_lpm(dev, 0);
+ usb_disable_usb2_hardware_lpm(dev);
usb_unlocked_disable_lpm(dev);
usb_disable_ltm(dev);
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -472,7 +472,10 @@ static ssize_t usb2_hardware_lpm_store(s
if (!ret) {
udev->usb2_hw_lpm_allowed = value;
- ret = usb_set_usb2_hardware_lpm(udev, value);
+ if (value)
+ ret = usb_enable_usb2_hardware_lpm(udev);
+ else
+ ret = usb_disable_usb2_hardware_lpm(udev);
}
usb_unlock_device(udev);
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -84,7 +84,8 @@ extern int usb_remote_wakeup(struct usb_
extern int usb_runtime_suspend(struct device *dev);
extern int usb_runtime_resume(struct device *dev);
extern int usb_runtime_idle(struct device *dev);
-extern int usb_set_usb2_hardware_lpm(struct usb_device *udev, int enable);
+extern int usb_enable_usb2_hardware_lpm(struct usb_device *udev);
+extern int usb_disable_usb2_hardware_lpm(struct usb_device *udev);
#else
@@ -104,7 +105,12 @@ static inline int usb_autoresume_device(
return 0;
}
-static inline int usb_set_usb2_hardware_lpm(struct usb_device *udev, int enable)
+static inline int usb_enable_usb2_hardware_lpm(struct usb_device *udev)
+{
+ return 0;
+}
+
+static inline int usb_disable_usb2_hardware_lpm(struct usb_device *udev)
{
return 0;
}
Powered by blists - more mailing lists