[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190515090626.291728022@linuxfoundation.org>
Date: Wed, 15 May 2019 12:56:55 +0200
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Oliver Neukum <oneukum@...e.com>,
"David S. Miller" <davem@...emloft.net>
Subject: [PATCH 5.1 31/46] aqc111: fix double endianness swap on BE
From: Oliver Neukum <oneukum@...e.com>
[ Upstream commit 2cf672709beb005f6e90cb4edbed6f2218ba953e ]
If you are using a function that does a swap in place,
you cannot just reuse the buffer on the assumption that it has
not been changed.
Signed-off-by: Oliver Neukum <oneukum@...e.com>
Signed-off-by: David S. Miller <davem@...emloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
drivers/net/usb/aqc111.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/net/usb/aqc111.c
+++ b/drivers/net/usb/aqc111.c
@@ -1428,7 +1428,7 @@ static int aqc111_resume(struct usb_inte
{
struct usbnet *dev = usb_get_intfdata(intf);
struct aqc111_data *aqc111_data = dev->driver_priv;
- u16 reg16;
+ u16 reg16, oldreg16;
u8 reg8;
netif_carrier_off(dev->net);
@@ -1444,9 +1444,11 @@ static int aqc111_resume(struct usb_inte
/* Configure RX control register => start operation */
reg16 = aqc111_data->rxctl;
reg16 &= ~SFR_RX_CTL_START;
+ /* needs to be saved in case endianness is swapped */
+ oldreg16 = reg16;
aqc111_write16_cmd_nopm(dev, AQ_ACCESS_MAC, SFR_RX_CTL, 2, ®16);
- reg16 |= SFR_RX_CTL_START;
+ reg16 = oldreg16 | SFR_RX_CTL_START;
aqc111_write16_cmd_nopm(dev, AQ_ACCESS_MAC, SFR_RX_CTL, 2, ®16);
aqc111_set_phy_speed(dev, aqc111_data->autoneg,
Powered by blists - more mailing lists