[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CANk1AXSuacSP79gtxiOUdf3pKgq0-eWXoeoQdTYX4QV4=NedDA@mail.gmail.com>
Date: Thu, 16 May 2019 12:35:27 -0500
From: Alan Tull <atull@...nel.org>
To: Wu Hao <hao.wu@...el.com>, Scott Wood <swood@...hat.com>
Cc: Moritz Fischer <mdf@...nel.org>, linux-fpga@...r.kernel.org,
linux-kernel <linux-kernel@...r.kernel.org>,
linux-api@...r.kernel.org, Ananda Ravuri <ananda.ravuri@...el.com>,
Xu Yilun <yilun.xu@...el.com>
Subject: Re: [PATCH v2 04/18] fpga: dfl: fme: support 512bit data width PR
On Mon, Apr 29, 2019 at 4:12 AM Wu Hao <hao.wu@...el.com> wrote:
It looks like this addressed the review comments. Adding my Ack. Is
there anything else on this patch?
Alan
>
> In early partial reconfiguration private feature, it only
> supports 32bit data width when writing data to hardware for
> PR. 512bit data width PR support is an important optimization
> for some specific solutions (e.g. XEON with FPGA integrated),
> it allows driver to use AVX512 instruction to improve the
> performance of partial reconfiguration. e.g. programming one
> 100MB bitstream image via this 512bit data width PR hardware
> only takes ~300ms, but 32bit revision requires ~3s per test
> result.
>
> Please note now this optimization is only done on revision 2
> of this PR private feature which is only used in integrated
> solution that AVX512 is always supported. This revision 2
> hardware doesn't support 32bit PR.
>
> Signed-off-by: Ananda Ravuri <ananda.ravuri@...el.com>
> Signed-off-by: Xu Yilun <yilun.xu@...el.com>
> Signed-off-by: Wu Hao <hao.wu@...el.com>
Acked-by: Alan Tull <atull@...nel.org>
> ---
> v2: check AVX512 support using cpu_feature_enabled()
> fix other comments from Scott Wood <swood@...hat.com>
> ---
> drivers/fpga/dfl-fme-main.c | 3 ++
> drivers/fpga/dfl-fme-mgr.c | 113 +++++++++++++++++++++++++++++++++++++-------
> drivers/fpga/dfl-fme-pr.c | 43 +++++++++++------
> drivers/fpga/dfl-fme.h | 2 +
> drivers/fpga/dfl.h | 5 ++
> 5 files changed, 135 insertions(+), 31 deletions(-)
>
> diff --git a/drivers/fpga/dfl-fme-main.c b/drivers/fpga/dfl-fme-main.c
> index 086ad24..076d74f 100644
> --- a/drivers/fpga/dfl-fme-main.c
> +++ b/drivers/fpga/dfl-fme-main.c
> @@ -21,6 +21,8 @@
> #include "dfl.h"
> #include "dfl-fme.h"
>
> +#define DRV_VERSION "0.8"
> +
> static ssize_t ports_num_show(struct device *dev,
> struct device_attribute *attr, char *buf)
> {
> @@ -277,3 +279,4 @@ static int fme_remove(struct platform_device *pdev)
> MODULE_AUTHOR("Intel Corporation");
> MODULE_LICENSE("GPL v2");
> MODULE_ALIAS("platform:dfl-fme");
> +MODULE_VERSION(DRV_VERSION);
> diff --git a/drivers/fpga/dfl-fme-mgr.c b/drivers/fpga/dfl-fme-mgr.c
> index b3f7eee..d1a4ba5 100644
> --- a/drivers/fpga/dfl-fme-mgr.c
> +++ b/drivers/fpga/dfl-fme-mgr.c
> @@ -22,14 +22,18 @@
> #include <linux/io-64-nonatomic-lo-hi.h>
> #include <linux/fpga/fpga-mgr.h>
>
> +#include "dfl.h"
> #include "dfl-fme-pr.h"
>
> +#define DRV_VERSION "0.8"
> +
> /* FME Partial Reconfiguration Sub Feature Register Set */
> #define FME_PR_DFH 0x0
> #define FME_PR_CTRL 0x8
> #define FME_PR_STS 0x10
> #define FME_PR_DATA 0x18
> #define FME_PR_ERR 0x20
> +#define FME_PR_512_DATA 0x40 /* Data Register for 512bit datawidth PR */
> #define FME_PR_INTFC_ID_L 0xA8
> #define FME_PR_INTFC_ID_H 0xB0
>
> @@ -67,8 +71,43 @@
> #define PR_WAIT_TIMEOUT 8000000
> #define PR_HOST_STATUS_IDLE 0
>
> +#if defined(CONFIG_X86) && defined(CONFIG_AS_AVX512)
> +
> +#include <linux/cpufeature.h>
> +#include <asm/fpu/api.h>
> +
> +static inline int is_cpu_avx512_enabled(void)
> +{
> + return cpu_feature_enabled(X86_FEATURE_AVX512F);
> +}
> +
> +static inline void copy512(const void *src, void __iomem *dst)
> +{
> + kernel_fpu_begin();
> +
> + asm volatile("vmovdqu64 (%0), %%zmm0;"
> + "vmovntdq %%zmm0, (%1);"
> + :
> + : "r"(src), "r"(dst)
> + : "memory");
> +
> + kernel_fpu_end();
> +}
> +#else
> +static inline int is_cpu_avx512_enabled(void)
> +{
> + return 0;
> +}
> +
> +static inline void copy512(const void *src, void __iomem *dst)
> +{
> + WARN_ON_ONCE(1);
> +}
> +#endif
> +
> struct fme_mgr_priv {
> void __iomem *ioaddr;
> + unsigned int pr_datawidth;
> u64 pr_error;
> };
>
> @@ -169,7 +208,7 @@ static int fme_mgr_write(struct fpga_manager *mgr,
> struct fme_mgr_priv *priv = mgr->priv;
> void __iomem *fme_pr = priv->ioaddr;
> u64 pr_ctrl, pr_status, pr_data;
> - int delay = 0, pr_credit, i = 0;
> + int ret = 0, delay = 0, pr_credit;
>
> dev_dbg(dev, "start request\n");
>
> @@ -181,9 +220,9 @@ static int fme_mgr_write(struct fpga_manager *mgr,
>
> /*
> * driver can push data to PR hardware using PR_DATA register once HW
> - * has enough pr_credit (> 1), pr_credit reduces one for every 32bit
> - * pr data write to PR_DATA register. If pr_credit <= 1, driver needs
> - * to wait for enough pr_credit from hardware by polling.
> + * has enough pr_credit (> 1), pr_credit reduces one for every pr data
> + * width write to PR_DATA register. If pr_credit <= 1, driver needs to
> + * wait for enough pr_credit from hardware by polling.
> */
> pr_status = readq(fme_pr + FME_PR_STS);
> pr_credit = FIELD_GET(FME_PR_STS_PR_CREDIT, pr_status);
> @@ -192,7 +231,8 @@ static int fme_mgr_write(struct fpga_manager *mgr,
> while (pr_credit <= 1) {
> if (delay++ > PR_WAIT_TIMEOUT) {
> dev_err(dev, "PR_CREDIT timeout\n");
> - return -ETIMEDOUT;
> + ret = -ETIMEDOUT;
> + goto done;
> }
> udelay(1);
>
> @@ -200,21 +240,27 @@ static int fme_mgr_write(struct fpga_manager *mgr,
> pr_credit = FIELD_GET(FME_PR_STS_PR_CREDIT, pr_status);
> }
>
> - if (count < 4) {
> - dev_err(dev, "Invalid PR bitstream size\n");
> - return -EINVAL;
> + WARN_ON(count < priv->pr_datawidth);
> +
> + switch (priv->pr_datawidth) {
> + case 4:
> + pr_data = FIELD_PREP(FME_PR_DATA_PR_DATA_RAW,
> + *(u32 *)buf);
> + writeq(pr_data, fme_pr + FME_PR_DATA);
> + break;
> + case 64:
> + copy512(buf, fme_pr + FME_PR_512_DATA);
> + break;
> + default:
> + WARN_ON_ONCE(1);
> }
> -
> - pr_data = 0;
> - pr_data |= FIELD_PREP(FME_PR_DATA_PR_DATA_RAW,
> - *(((u32 *)buf) + i));
> - writeq(pr_data, fme_pr + FME_PR_DATA);
> - count -= 4;
> + buf += priv->pr_datawidth;
> + count -= priv->pr_datawidth;
> pr_credit--;
> - i++;
> }
>
> - return 0;
> +done:
> + return ret;
> }
>
> static int fme_mgr_write_complete(struct fpga_manager *mgr,
> @@ -279,6 +325,36 @@ static void fme_mgr_get_compat_id(void __iomem *fme_pr,
> id->id_h = readq(fme_pr + FME_PR_INTFC_ID_H);
> }
>
> +static u8 fme_mgr_get_pr_datawidth(struct device *dev, void __iomem *fme_pr)
> +{
> + u8 revision = dfl_feature_revision(fme_pr);
> +
> + if (revision < 2) {
> + /*
> + * revision 0 and 1 only support 32bit data width partial
> + * reconfiguration, so pr_datawidth is 4 (Byte).
> + */
> + return 4;
> + } else if (revision == 2) {
> + /*
> + * revision 2 hardware has optimization to support 512bit data
> + * width partial reconfiguration with AVX512 instructions. So
> + * pr_datawidth is 64 (Byte). As revision 2 hardware is only
> + * used in integrated solution, CPU supports AVX512 instructions
> + * for sure, but it still needs to check here as AVX512 could be
> + * disabled in kernel (e.g. using clearcpuid boot option).
> + */
> + if (is_cpu_avx512_enabled())
> + return 64;
> +
> + dev_err(dev, "revision 2: AVX512 is disabled\n");
> + return 0;
> + }
> +
> + dev_err(dev, "revision %d is not supported yet\n", revision);
> + return 0;
> +}
> +
> static int fme_mgr_probe(struct platform_device *pdev)
> {
> struct dfl_fme_mgr_pdata *pdata = dev_get_platdata(&pdev->dev);
> @@ -302,6 +378,10 @@ static int fme_mgr_probe(struct platform_device *pdev)
> return PTR_ERR(priv->ioaddr);
> }
>
> + priv->pr_datawidth = fme_mgr_get_pr_datawidth(dev, priv->ioaddr);
> + if (!priv->pr_datawidth)
> + return -ENODEV;
> +
> compat_id = devm_kzalloc(dev, sizeof(*compat_id), GFP_KERNEL);
> if (!compat_id)
> return -ENOMEM;
> @@ -342,3 +422,4 @@ static int fme_mgr_remove(struct platform_device *pdev)
> MODULE_AUTHOR("Intel Corporation");
> MODULE_LICENSE("GPL v2");
> MODULE_ALIAS("platform:dfl-fme-mgr");
> +MODULE_VERSION(DRV_VERSION);
> diff --git a/drivers/fpga/dfl-fme-pr.c b/drivers/fpga/dfl-fme-pr.c
> index 3c71dc3..cd94ba8 100644
> --- a/drivers/fpga/dfl-fme-pr.c
> +++ b/drivers/fpga/dfl-fme-pr.c
> @@ -83,7 +83,7 @@ static int fme_pr(struct platform_device *pdev, unsigned long arg)
> if (copy_from_user(&port_pr, argp, minsz))
> return -EFAULT;
>
> - if (port_pr.argsz < minsz || port_pr.flags)
> + if (port_pr.argsz < minsz || port_pr.flags || !port_pr.buffer_size)
> return -EINVAL;
>
> /* get fme header region */
> @@ -101,15 +101,25 @@ static int fme_pr(struct platform_device *pdev, unsigned long arg)
> port_pr.buffer_size))
> return -EFAULT;
>
> + mutex_lock(&pdata->lock);
> + fme = dfl_fpga_pdata_get_private(pdata);
> + /* fme device has been unregistered. */
> + if (!fme) {
> + ret = -EINVAL;
> + goto unlock_exit;
> + }
> +
> /*
> * align PR buffer per PR bandwidth, as HW ignores the extra padding
> * data automatically.
> */
> - length = ALIGN(port_pr.buffer_size, 4);
> + length = ALIGN(port_pr.buffer_size, fme->pr_datawidth);
>
> buf = vmalloc(length);
> - if (!buf)
> - return -ENOMEM;
> + if (!buf) {
> + ret = -ENOMEM;
> + goto unlock_exit;
> + }
>
> if (copy_from_user(buf,
> (void __user *)(unsigned long)port_pr.buffer_address,
> @@ -127,18 +137,10 @@ static int fme_pr(struct platform_device *pdev, unsigned long arg)
>
> info->flags |= FPGA_MGR_PARTIAL_RECONFIG;
>
> - mutex_lock(&pdata->lock);
> - fme = dfl_fpga_pdata_get_private(pdata);
> - /* fme device has been unregistered. */
> - if (!fme) {
> - ret = -EINVAL;
> - goto unlock_exit;
> - }
> -
> region = dfl_fme_region_find(fme, port_pr.port_id);
> if (!region) {
> ret = -EINVAL;
> - goto unlock_exit;
> + goto free_exit;
> }
>
> fpga_image_info_free(region->info);
> @@ -159,10 +161,10 @@ static int fme_pr(struct platform_device *pdev, unsigned long arg)
> fpga_bridges_put(®ion->bridge_list);
>
> put_device(®ion->dev);
> -unlock_exit:
> - mutex_unlock(&pdata->lock);
> free_exit:
> vfree(buf);
> +unlock_exit:
> + mutex_unlock(&pdata->lock);
> return ret;
> }
>
> @@ -388,6 +390,17 @@ static int pr_mgmt_init(struct platform_device *pdev,
> mutex_lock(&pdata->lock);
> priv = dfl_fpga_pdata_get_private(pdata);
>
> + /*
> + * Initialize PR data width.
> + * Only revision 2 supports 512bit datawidth for better performance,
> + * other revisions use default 32bit datawidth. This is used for
> + * buffer alignment.
> + */
> + if (dfl_feature_revision(feature->ioaddr) == 2)
> + priv->pr_datawidth = 64;
> + else
> + priv->pr_datawidth = 4;
> +
> /* Initialize the region and bridge sub device list */
> INIT_LIST_HEAD(&priv->region_list);
> INIT_LIST_HEAD(&priv->bridge_list);
> diff --git a/drivers/fpga/dfl-fme.h b/drivers/fpga/dfl-fme.h
> index 5394a21..de20755 100644
> --- a/drivers/fpga/dfl-fme.h
> +++ b/drivers/fpga/dfl-fme.h
> @@ -21,12 +21,14 @@
> /**
> * struct dfl_fme - dfl fme private data
> *
> + * @pr_datawidth: data width for partial reconfiguration.
> * @mgr: FME's FPGA manager platform device.
> * @region_list: linked list of FME's FPGA regions.
> * @bridge_list: linked list of FME's FPGA bridges.
> * @pdata: fme platform device's pdata.
> */
> struct dfl_fme {
> + int pr_datawidth;
> struct platform_device *mgr;
> struct list_head region_list;
> struct list_head bridge_list;
> diff --git a/drivers/fpga/dfl.h b/drivers/fpga/dfl.h
> index a8b869e..8851c6c 100644
> --- a/drivers/fpga/dfl.h
> +++ b/drivers/fpga/dfl.h
> @@ -331,6 +331,11 @@ static inline bool dfl_feature_is_port(void __iomem *base)
> (FIELD_GET(DFH_ID, v) == DFH_ID_FIU_PORT);
> }
>
> +static inline u8 dfl_feature_revision(void __iomem *base)
> +{
> + return (u8)FIELD_GET(DFH_REVISION, readq(base + DFH));
> +}
> +
> /**
> * struct dfl_fpga_enum_info - DFL FPGA enumeration information
> *
> --
> 1.8.3.1
>
Powered by blists - more mailing lists