lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190516225941.170355-4-dianders@chromium.org>
Date:   Thu, 16 May 2019 15:59:41 -0700
From:   Douglas Anderson <dianders@...omium.org>
To:     Minas Harutyunyan <hminas@...opsys.com>,
        Felipe Balbi <felipe.balbi@...ux.intel.com>, heiko@...ech.de
Cc:     Alan Stern <stern@...land.harvard.edu>,
        Artur Petrosyan <Arthur.Petrosyan@...opsys.com>,
        amstan@...omium.org, linux-rockchip@...ts.infradead.org,
        William Wu <william.wu@...k-chips.com>,
        linux-usb@...r.kernel.org, Stefan Wahren <stefan.wahren@...e.com>,
        Randy Li <ayaka@...lik.info>, zyw@...k-chips.com,
        mka@...omium.org, ryandcase@...omium.org,
        Amelie Delaunay <amelie.delaunay@...com>, jwerner@...omium.org,
        dinguyen@...nsource.altera.com,
        Elaine Zhang <zhangqing@...k-chips.com>,
        Douglas Anderson <dianders@...omium.org>,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        linux-arm-kernel@...ts.infradead.org
Subject: [REPOST PATCH v2 3/3] ARM: dts: rockchip: Allow wakeup from rk3288-veyron's dwc2 USB ports

We want to be able to wake from USB if a device is plugged in that
wants remote wakeup.  Enable it on both dwc2 controllers.

NOTE: this is added specifically to veyron and not to rk3288 in
general since it's not known whether all rk3288 boards are designed to
support USB wakeup.  It is plausible that some boards could shut down
important rails in S3.

Also note that currently wakeup doesn't seem to happen unless you use
the "deep" suspend mode (where SDRAM is turned off).  Presumably the
shallow suspend mode is gating some sort of clock that's important but
I couldn't easily figure out how to get it working.

Signed-off-by: Douglas Anderson <dianders@...omium.org>
---

Changes in v2:
- rk3288-veyron dts patch new for v2.

 arch/arm/boot/dts/rk3288-veyron.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi
index 1252522392c7..1d8bfed7830c 100644
--- a/arch/arm/boot/dts/rk3288-veyron.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
@@ -424,6 +424,7 @@
 
 &usb_host1 {
 	status = "okay";
+	snps,need-phy-for-wake;
 };
 
 &usb_otg {
@@ -432,6 +433,7 @@
 	assigned-clocks = <&cru SCLK_USBPHY480M_SRC>;
 	assigned-clock-parents = <&usbphy0>;
 	dr_mode = "host";
+	snps,need-phy-for-wake;
 };
 
 &vopb {
-- 
2.21.0.1020.gf2820cf01a-goog

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ