lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <f0f4f7cd-b151-87d4-e1e1-44969a0ba33b@st.com>
Date:   Thu, 16 May 2019 09:35:21 +0200
From:   Pierre Yves MORDRET <pierre-yves.mordret@...com>
To:     Fabrice Gasnier <fabrice.gasnier@...com>, <wsa@...-dreams.de>
CC:     <mcoquelin.stm32@...il.com>, <alexandre.torgue@...com>,
        <linux-i2c@...r.kernel.org>,
        <linux-stm32@...md-mailman.stormreply.com>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] i2c: i2c-stm32f7: fix the get_irq error cases

Hi

Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@...com>

Thanks
Regards

On 5/15/19 5:09 PM, Fabrice Gasnier wrote:
> During probe, return the "get_irq" error value instead of -EINVAL which
> allows the driver to be deferred probed if needed.
> Fix also the case where of_irq_get() returns a negative value.
> Note :
> On failure of_irq_get() returns 0 or a negative value while
> platform_get_irq() returns a negative value.
> 
> Fixes: aeb068c57214 ("i2c: i2c-stm32f7: add driver")
> 
> Signed-off-by: Fabien Dessenne <fabien.dessenne@...com>
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@...com>
> ---
>  drivers/i2c/busses/i2c-stm32f7.c | 26 ++++++++++++++------------
>  1 file changed, 14 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
> index 4284fc9..14fb105 100644
> --- a/drivers/i2c/busses/i2c-stm32f7.c
> +++ b/drivers/i2c/busses/i2c-stm32f7.c
> @@ -25,7 +25,6 @@
>  #include <linux/module.h>
>  #include <linux/of.h>
>  #include <linux/of_address.h>
> -#include <linux/of_irq.h>
>  #include <linux/of_platform.h>
>  #include <linux/platform_device.h>
>  #include <linux/pinctrl/consumer.h>
> @@ -1812,15 +1811,14 @@ static struct i2c_algorithm stm32f7_i2c_algo = {
>  
>  static int stm32f7_i2c_probe(struct platform_device *pdev)
>  {
> -	struct device_node *np = pdev->dev.of_node;
>  	struct stm32f7_i2c_dev *i2c_dev;
>  	const struct stm32f7_i2c_setup *setup;
>  	struct resource *res;
> -	u32 irq_error, irq_event, clk_rate, rise_time, fall_time;
> +	u32 clk_rate, rise_time, fall_time;
>  	struct i2c_adapter *adap;
>  	struct reset_control *rst;
>  	dma_addr_t phy_addr;
> -	int ret;
> +	int irq_error, irq_event, ret;
>  
>  	i2c_dev = devm_kzalloc(&pdev->dev, sizeof(*i2c_dev), GFP_KERNEL);
>  	if (!i2c_dev)
> @@ -1832,16 +1830,20 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
>  		return PTR_ERR(i2c_dev->base);
>  	phy_addr = (dma_addr_t)res->start;
>  
> -	irq_event = irq_of_parse_and_map(np, 0);
> -	if (!irq_event) {
> -		dev_err(&pdev->dev, "IRQ event missing or invalid\n");
> -		return -EINVAL;
> +	irq_event = platform_get_irq(pdev, 0);
> +	if (irq_event < 0) {
> +		if (irq_event != -EPROBE_DEFER)
> +			dev_err(&pdev->dev, "Failed to get IRQ event: %d\n",
> +				irq_event);
> +		return irq_event;
>  	}
>  
> -	irq_error = irq_of_parse_and_map(np, 1);
> -	if (!irq_error) {
> -		dev_err(&pdev->dev, "IRQ error missing or invalid\n");
> -		return -EINVAL;
> +	irq_error = platform_get_irq(pdev, 1);
> +	if (irq_error < 0) {
> +		if (irq_error != -EPROBE_DEFER)
> +			dev_err(&pdev->dev, "Failed to get IRQ error: %d\n",
> +				irq_error);
> +		return irq_error;
>  	}
>  
>  	i2c_dev->clk = devm_clk_get(&pdev->dev, NULL);
> 

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ