[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20190516143251.akbt3ns6ue2jrhl5@localhost>
Date: Thu, 16 May 2019 07:32:51 -0700
From: Richard Cochran <richardcochran@...il.com>
To: "Y.b. Lu" <yangbo.lu@....com>
Cc: "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
David Miller <davem@...emloft.net>,
Claudiu Manoil <claudiu.manoil@....com>,
Shawn Guo <shawnguo@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 1/3] enetc: add hardware timestamping support
On Thu, May 16, 2019 at 09:59:08AM +0000, Y.b. Lu wrote:
> +config FSL_ENETC_HW_TIMESTAMPING
> + bool "ENETC hardware timestamping support"
> + depends on FSL_ENETC || FSL_ENETC_VF
> + help
> + Enable hardware timestamping support on the Ethernet packets
> + using the SO_TIMESTAMPING API. Because the RX BD ring dynamic
> + allocation hasn't been supported and it's too expensive to use
s/it's/it is/
> + extended RX BDs if timestamping isn't used, the option was used
> + to control hardware timestamping/extended RX BDs to be enabled
> + or not.
..., this option enables extended RX BDs in order to support hardware
timestamping.
> static bool enetc_clean_tx_ring(struct enetc_bdr *tx_ring, int napi_budget)
> {
> struct net_device *ndev = tx_ring->ndev;
> + struct enetc_ndev_priv *priv = netdev_priv(ndev);
> int tx_frm_cnt = 0, tx_byte_cnt = 0;
> struct enetc_tx_swbd *tx_swbd;
> + union enetc_tx_bd *txbd;
> + bool do_tstamp;
> int i, bds_to_clean;
> + u64 tstamp = 0;
Please keep in reverse Christmas tree order as much as possible:
union enetc_tx_bd *txbd;
int i, bds_to_clean;
bool do_tstamp;
u64 tstamp = 0;
> i = tx_ring->next_to_clean;
> tx_swbd = &tx_ring->tx_swbd[i];
> bds_to_clean = enetc_bd_ready_count(tx_ring, i);
>
> + do_tstamp = false;
> +
> while (bds_to_clean && tx_frm_cnt < ENETC_DEFAULT_TX_WORK) {
> bool is_eof = !!tx_swbd->skb;
>
> + if (unlikely(tx_swbd->check_wb)) {
> + txbd = ENETC_TXBD(*tx_ring, i);
> +
> + if (!(txbd->flags & ENETC_TXBD_FLAGS_W))
> + goto no_wb;
> +
> + if (tx_swbd->do_tstamp) {
> + enetc_get_tx_tstamp(&priv->si->hw, txbd,
> + &tstamp);
> + do_tstamp = true;
> + }
> + }
> +no_wb:
This goto seems strange and unnecessary. How about this instead?
if (txbd->flags & ENETC_TXBD_FLAGS_W &&
tx_swbd->do_tstamp) {
enetc_get_tx_tstamp(&priv->si->hw, txbd, &tstamp);
do_tstamp = true;
}
> enetc_unmap_tx_buff(tx_ring, tx_swbd);
> if (is_eof) {
> + if (unlikely(do_tstamp)) {
> + enetc_tstamp_tx(tx_swbd->skb, tstamp);
> + do_tstamp = false;
> + }
> napi_consume_skb(tx_swbd->skb, napi_budget);
> tx_swbd->skb = NULL;
> }
> @@ -167,6 +169,11 @@ struct enetc_cls_rule {
>
> #define ENETC_MAX_BDR_INT 2 /* fixed to max # of available cpus */
>
> +enum enetc_hw_features {
This is a poor choice of name. It sounds like it describes HW
capabilities, but you use it to track whether a feature is requested
at run time.
> + ENETC_F_RX_TSTAMP = BIT(0),
> + ENETC_F_TX_TSTAMP = BIT(1),
> +};
> +
> struct enetc_ndev_priv {
> struct net_device *ndev;
> struct device *dev; /* dma-mapping device */
> @@ -178,6 +185,7 @@ struct enetc_ndev_priv {
> u16 rx_bd_count, tx_bd_count;
>
> u16 msg_enable;
> + int hw_features;
This is also poorly named. How about "tstamp_request" instead?
>
> struct enetc_bdr *tx_ring[16];
> struct enetc_bdr *rx_ring[16];
Thanks,
Richard
Powered by blists - more mailing lists