lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1558024913-26502-2-git-send-email-kdasu.kdev@gmail.com>
Date:   Thu, 16 May 2019 12:41:47 -0400
From:   Kamal Dasu <kdasu.kdev@...il.com>
To:     linux-mtd@...ts.infradead.org
Cc:     bcm-kernel-feedback-list@...adcom.com,
        linux-kernel@...r.kernel.org, Kamal Dasu <kdasu.kdev@...il.com>,
        Brian Norris <computersforpeace@...il.com>,
        Miquel Raynal <miquel.raynal@...tlin.com>,
        Richard Weinberger <richard@....at>,
        David Woodhouse <dwmw2@...radead.org>,
        Marek Vasut <marek.vasut@...il.com>,
        Vignesh Raghavendra <vigneshr@...com>
Subject: [PATCH v3 2/2] mtd: nand: raw: brcmnand: When oops in progress use pio and interrupt polling

If mtd_oops is in progress, switch to polling during NAND command
completion instead of relying on DMA/interrupts so that the mtd_oops
buffer can be completely written in the assigned NAND partition.

Signed-off-by: Kamal Dasu <kdasu.kdev@...il.com>
---
 drivers/mtd/nand/raw/brcmnand/brcmnand.c | 48 ++++++++++++++++++++++++++++++--
 1 file changed, 45 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/nand/raw/brcmnand/brcmnand.c b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
index ce0b8ff..dca8eb8 100644
--- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
@@ -159,6 +159,7 @@ struct brcmnand_controller {
 	u32			nand_cs_nand_xor;
 	u32			corr_stat_threshold;
 	u32			flash_dma_mode;
+	bool			pio_poll_mode;
 };
 
 struct brcmnand_cfg {
@@ -823,6 +824,20 @@ static inline bool has_flash_dma(struct brcmnand_controller *ctrl)
 	return ctrl->flash_dma_base;
 }
 
+static inline void disable_ctrl_irqs(struct brcmnand_controller *ctrl)
+{
+	if (ctrl->pio_poll_mode)
+		return;
+
+	if (has_flash_dma(ctrl)) {
+		ctrl->flash_dma_base = 0;
+		disable_irq(ctrl->dma_irq);
+	}
+
+	disable_irq(ctrl->irq);
+	ctrl->pio_poll_mode = true;
+}
+
 static inline bool flash_dma_buf_ok(const void *buf)
 {
 	return buf && !is_vmalloc_addr(buf) &&
@@ -1237,15 +1252,42 @@ static void brcmnand_cmd_ctrl(struct nand_chip *chip, int dat,
 	/* intentionally left blank */
 }
 
+static bool brcmstb_nand_wait_for_completion(struct nand_chip *chip)
+{
+	struct brcmnand_host *host = nand_get_controller_data(chip);
+	struct brcmnand_controller *ctrl = host->ctrl;
+	struct mtd_info *mtd = nand_to_mtd(chip);
+	bool err = false;
+	int sts;
+
+	if (mtd->oops_panic_write) {
+		/* switch to interrupt polling and PIO mode */
+		disable_ctrl_irqs(ctrl);
+		sts = bcmnand_ctrl_poll_status(ctrl, NAND_CTRL_RDY,
+					       NAND_CTRL_RDY, 0);
+		err = (sts < 0) ? true : false;
+	} else {
+		unsigned long timeo = msecs_to_jiffies(
+						NAND_POLL_STATUS_TIMEOUT_MS);
+		/* wait for completion interrupt */
+		sts = wait_for_completion_timeout(&ctrl->done, timeo);
+		err = (sts <= 0) ? true : false;
+	}
+
+	return err;
+}
+
 static int brcmnand_waitfunc(struct nand_chip *chip)
 {
 	struct brcmnand_host *host = nand_get_controller_data(chip);
 	struct brcmnand_controller *ctrl = host->ctrl;
-	unsigned long timeo = msecs_to_jiffies(100);
+	bool err = false;
 
 	dev_dbg(ctrl->dev, "wait on native cmd %d\n", ctrl->cmd_pending);
-	if (ctrl->cmd_pending &&
-			wait_for_completion_timeout(&ctrl->done, timeo) <= 0) {
+	if (ctrl->cmd_pending)
+		err = brcmstb_nand_wait_for_completion(chip);
+
+	if (err) {
 		u32 cmd = brcmnand_read_reg(ctrl, BRCMNAND_CMD_START)
 					>> brcmnand_cmd_shift(ctrl);
 
-- 
1.9.0.138.g2de3478

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ