linux-kernel - [RFC 2/5] clk: bcm2835: set pllb

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20190517153508.18314-3-nsaenzjulienne@suse.de>
Date:   Fri, 17 May 2019 17:35:04 +0200
From:   Nicolas Saenz Julienne <nsaenzjulienne@...e.de>
To:     stefan.wahren@...e.com, Florian Fainelli <f.fainelli@...il.com>,
        Ray Jui <rjui@...adcom.com>,
        Scott Branden <sbranden@...adcom.com>,
        bcm-kernel-feedback-list@...adcom.com,
        Eric Anholt <eric@...olt.net>
Cc:     mbrugger@...e.de, viresh.kumar@...aro.org, rjw@...ysocki.net,
        sboyd@...nel.org, ptesarik@...e.com,
        linux-rpi-kernel@...ts.infradead.org,
        Nicolas Saenz Julienne <nsaenzjulienne@...e.de>,
        Michael Turquette <mturquette@...libre.com>,
        linux-clk@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-kernel@...r.kernel.org
Subject: [RFC 2/5] clk: bcm2835: set pllb_arm divisor as readonly

This divisor is controlled by the firmware, we don't want the clock
subsystem to update it inadvertently.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@...e.de>
---
 drivers/clk/bcm/clk-bcm2835.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c
index c2772dfb155a..5aea110672f3 100644
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -465,6 +465,7 @@ struct bcm2835_pll_divider_data {
 	u32 hold_mask;
 	u32 fixed_divider;
 	u32 flags;
+	u32 div_flags;
 };
 
 struct bcm2835_clock_data {
@@ -1349,7 +1350,7 @@ bcm2835_register_pll_divider(struct bcm2835_cprman *cprman,
 	divider->div.reg = cprman->regs + data->a2w_reg;
 	divider->div.shift = A2W_PLL_DIV_SHIFT;
 	divider->div.width = A2W_PLL_DIV_BITS;
-	divider->div.flags = CLK_DIVIDER_MAX_AT_ZERO;
+	divider->div.flags = data->div_flags | CLK_DIVIDER_MAX_AT_ZERO;
 	divider->div.lock = &cprman->regs_lock;
 	divider->div.hw.init = &init;
 	divider->div.table = NULL;
@@ -1676,7 +1677,8 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
 		.load_mask = CM_PLLB_LOADARM,
 		.hold_mask = CM_PLLB_HOLDARM,
 		.fixed_divider = 1,
-		.flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE),
+		.flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE,
+		.div_flags = CLK_DIVIDER_READ_ONLY),
 
 	/*
 	 * PLLC is the core PLL, used to drive the core VPU clock.
-- 
2.21.0