[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1558117914-35807-2-git-send-email-kdasu.kdev@gmail.com>
Date: Fri, 17 May 2019 14:29:55 -0400
From: Kamal Dasu <kdasu.kdev@...il.com>
To: linux-mtd@...ts.infradead.org
Cc: bcm-kernel-feedback-list@...adcom.com,
linux-kernel@...r.kernel.org, Kamal Dasu <kdasu.kdev@...il.com>,
Brian Norris <computersforpeace@...il.com>,
Miquel Raynal <miquel.raynal@...tlin.com>,
Richard Weinberger <richard@....at>,
David Woodhouse <dwmw2@...radead.org>,
Marek Vasut <marek.vasut@...il.com>,
Vignesh Raghavendra <vigneshr@...com>
Subject: [PATCH 2/2] mtd: nand: raw: brcmnand: fallback to detected ecc-strength, ecc-step-size
This change supports nand-ecc-step-size and nand-ecc-strenght fields in
brcmnand dt node to be optional.
see: Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt
If both nand-ecc-strength and nand-ecc-step-size are not specified in
device tree node for NAND, nand_base driver does detect onfi ext ecc
info from ONFI extended parameter page for parts using ONFI >= 2.1. In
case of non-onfi NAND there could be a nand_id table entry with the ecc
info. If there is a valid device tree entry for nand-ecc-strength and
nand-ecc-step-size fields it still shall override the detected values.
Signed-off-by: Kamal Dasu <kdasu.kdev@...il.com>
---
drivers/mtd/nand/raw/brcmnand/brcmnand.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/mtd/nand/raw/brcmnand/brcmnand.c b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
index ce0b8ff..e967b30 100644
--- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
@@ -2144,6 +2144,16 @@ static int brcmnand_setup_dev(struct brcmnand_host *host)
return -EINVAL;
}
+ if (!(chip->ecc.size > 0 && chip->ecc.strength > 0) &&
+ (chip->base.eccreq.strength > 0 &&
+ chip->base.eccreq.step_size > 0)) {
+ /* use detected ecc parameters */
+ chip->ecc.size = chip->base.eccreq.step_size;
+ chip->ecc.strength = chip->base.eccreq.strength;
+ pr_info("Using detected nand-ecc-step-size %d, nand-ecc-strength %d\n",
+ chip->ecc.size, chip->ecc.strength);
+ }
+
switch (chip->ecc.size) {
case 512:
if (chip->ecc.algo == NAND_ECC_HAMMING)
--
1.9.0.138.g2de3478
Powered by blists - more mailing lists