| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20190518112050.35a99bbc@archlinux>
Date: Sat, 18 May 2019 11:20:50 +0100
From: Jonathan Cameron <jic23@...nel.org>
To: Beniamin Bia <beniamin.bia@...log.com>
Cc: <lars@...afoo.de>, <Michael.Hennerich@...log.com>,
<knaack.h@....de>, <pmeerw@...erw.net>,
<gregkh@...uxfoundation.org>, <linux-iio@...r.kernel.org>,
<devel@...verdev.osuosl.org>, <linux-kernel@...r.kernel.org>,
<mark.rutland@....com>, <robh+dt@...nel.org>,
<devicetree@...r.kernel.org>, <biabeniamin@...look.com>
Subject: Re: [PATCH 4/5] iio: adc: ad7606: Add support for software mode for
ad7616
On Thu, 16 May 2019 17:32:07 +0300
Beniamin Bia <beniamin.bia@...log.com> wrote:
> Support for ad7616 running in software was added. In order
> to activate the software mode, HW_RNGSEL pins must be pulled low.
> Oversampling and input ranges are now configured in corresponding
> registers. Ad7616 has multiple scale options when it is configured
> in software mode.
>
> Signed-off-by: Beniamin Bia <beniamin.bia@...log.com>
Looks good subject to comments on the previous.
Thanks,
Jonathan
> ---
> drivers/iio/adc/ad7606.c | 111 ++++++++++++++++++++++++++++++++++++---
> 1 file changed, 103 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/iio/adc/ad7606.c b/drivers/iio/adc/ad7606.c
> index 6df81117cacc..f77df3efe43f 100644
> --- a/drivers/iio/adc/ad7606.c
> +++ b/drivers/iio/adc/ad7606.c
> @@ -29,6 +29,20 @@
>
> #include "ad7606.h"
>
> +#define AD7606_RANGE_CH_ADDR(ch) (0x03 + ((ch) >> 1))
> +#define AD7606_OS_MODE 0x08
> +
> +#define AD7616_CONFIGURATION_REGISTER 0x02
> +#define AD7616_OS_MASK GENMASK(4, 2)
> +#define AD7616_BURST_MODE BIT(6)
> +#define AD7616_SEQEN_MODE BIT(5)
> +#define AD7616_RANGE_CH_ADDR_OFF 0x04
> +#define AD7616_RANGE_CH_ADDR(ch) ((((ch) & 0x1) << 1) + ((ch) >> 3))
> +#define AD7616_RANGE_CH_MSK(ch) (GENMASK(1, 0) << ((ch) & 0x6))
> +#define AD7616_RANGE_CH_MODE(ch, mode) ((mode) << (ch & GENMASK(2, 1)))
> +
> +static int ad7616_sw_mode_config(struct iio_dev *indio_dev);
> +
> /*
> * Scales are computed as 5000/32768 and 10000/32768 respectively,
> * so that when applied to the raw values they provide mV values
> @@ -37,6 +51,11 @@ static const unsigned int ad7606_scale_avail[2] = {
> 152588, 305176
> };
>
> +
> +static const unsigned int ad7616_sw_scale_avail[3] = {
> + 76293, 152588, 305176
> +};
> +
> static const unsigned int ad7606_oversampling_avail[7] = {
> 1, 2, 4, 8, 16, 32, 64,
> };
> @@ -282,6 +301,26 @@ static int ad7606_write_os_hw(struct iio_dev *indio_dev, int val)
> return 0;
> }
>
> +static int ad7616_write_scale_sw(struct iio_dev *indio_dev, int ch, int val)
> +{
> + struct ad7606_state *st = iio_priv(indio_dev);
> + unsigned int ch_addr, mode;
> +
> + ch_addr = AD7616_RANGE_CH_ADDR_OFF + AD7616_RANGE_CH_ADDR(ch);
> + mode = AD7616_RANGE_CH_MODE(ch, ((val + 1) & 0x3));
> +
> + return ad7606_spi_write_mask(st, ch_addr, AD7616_RANGE_CH_MSK(ch),
> + mode);
> +}
> +
> +static int ad7616_write_os_sw(struct iio_dev *indio_dev, int val)
> +{
> + struct ad7606_state *st = iio_priv(indio_dev);
> +
> + return ad7606_spi_write_mask(st, AD7616_CONFIGURATION_REGISTER,
> + AD7616_OS_MASK, val << 2);
> +}
> +
> static int ad7606_write_raw(struct iio_dev *indio_dev,
> struct iio_chan_spec const *chan,
> int val,
> @@ -368,14 +407,14 @@ static const struct attribute_group ad7606_attribute_group_range = {
> .attrs = ad7606_attributes_range,
> };
>
> -#define AD760X_CHANNEL(num, mask) { \
> +#define AD760X_CHANNEL(num, mask_sep, mask_type, mask_all) { \
> .type = IIO_VOLTAGE, \
> .indexed = 1, \
> .channel = num, \
> .address = num, \
> - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
> - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),\
> - .info_mask_shared_by_all = mask, \
> + .info_mask_separate = mask_sep, \
> + .info_mask_shared_by_type = mask_type, \
> + .info_mask_shared_by_all = mask_all, \
> .scan_index = num, \
> .scan_type = { \
> .sign = 's', \
> @@ -385,11 +424,18 @@ static const struct attribute_group ad7606_attribute_group_range = {
> }, \
> }
>
> -#define AD7605_CHANNEL(num) \
> - AD760X_CHANNEL(num, 0)
> +#define AD7605_CHANNEL(num) \
> + AD760X_CHANNEL(num, BIT(IIO_CHAN_INFO_RAW), \
> + BIT(IIO_CHAN_INFO_SCALE), 0)
> +
> +#define AD7606_CHANNEL(num) \
> + AD760X_CHANNEL(num, BIT(IIO_CHAN_INFO_RAW), \
> + BIT(IIO_CHAN_INFO_SCALE), \
> + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO))
>
> -#define AD7606_CHANNEL(num) \
> - AD760X_CHANNEL(num, BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO))
> +#define AD7616_CHANNEL(num) \
> + AD760X_CHANNEL(num, BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),\
> + 0, BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO))
>
> static const struct iio_chan_spec ad7605_channels[] = {
> IIO_CHAN_SOFT_TIMESTAMP(4),
> @@ -441,6 +487,26 @@ static const struct iio_chan_spec ad7616_channels[] = {
> AD7606_CHANNEL(15),
> };
>
> +static const struct iio_chan_spec ad7616_sw_channels[] = {
> + IIO_CHAN_SOFT_TIMESTAMP(16),
> + AD7616_CHANNEL(0),
> + AD7616_CHANNEL(1),
> + AD7616_CHANNEL(2),
> + AD7616_CHANNEL(3),
> + AD7616_CHANNEL(4),
> + AD7616_CHANNEL(5),
> + AD7616_CHANNEL(6),
> + AD7616_CHANNEL(7),
> + AD7616_CHANNEL(8),
> + AD7616_CHANNEL(9),
> + AD7616_CHANNEL(10),
> + AD7616_CHANNEL(11),
> + AD7616_CHANNEL(12),
> + AD7616_CHANNEL(13),
> + AD7616_CHANNEL(14),
> + AD7616_CHANNEL(15),
> +};
> +
> static const struct ad7606_chip_info ad7606_chip_info_tbl[] = {
> /* More devices added in future */
> [ID_AD7605_4] = {
> @@ -468,9 +534,13 @@ static const struct ad7606_chip_info ad7606_chip_info_tbl[] = {
> [ID_AD7616] = {
> .channels = ad7616_channels,
> .num_channels = 17,
> + .sw_mode_config = ad7616_sw_mode_config,
> .oversampling_avail = ad7616_oversampling_avail,
> .oversampling_num = ARRAY_SIZE(ad7616_oversampling_avail),
> .os_req_reset = true,
> + .spi_rd_wr_cmd = ad7616_spi_rd_wr_cmd,
> + .write_scale_sw = ad7616_write_scale_sw,
> + .write_os_sw = ad7616_write_os_sw,
> },
> };
>
> @@ -604,6 +674,23 @@ static void ad7606_regulator_disable(void *data)
> regulator_disable(st->reg);
> }
>
> +static int ad7616_sw_mode_config(struct iio_dev *indio_dev)
> +{
> + struct ad7606_state *st = iio_priv(indio_dev);
> +
> + /*
> + * Scale can be configured individually for each channel
> + * in software mode.
> + */
> + indio_dev->channels = ad7616_sw_channels;
> +
> + /* Activate Burst mode and SEQEN MODE */
> + return ad7606_spi_write_mask(st,
> + AD7616_CONFIGURATION_REGISTER,
> + AD7616_BURST_MODE | AD7616_SEQEN_MODE,
> + AD7616_BURST_MODE | AD7616_SEQEN_MODE);
> +}
> +
> int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
> const char *name, unsigned int id,
> const struct ad7606_bus_ops *bops)
> @@ -677,6 +764,10 @@ int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
> if (ret)
> dev_warn(st->dev, "failed to RESET: no RESET GPIO specified\n");
>
> + /* AD7616 requires al least 15ms to reconfigure after a reset */
> + if (msleep_interruptible(15))
> + return -ERESTARTSYS;
> +
> st->write_scale = ad7606_write_scale_hw;
> st->write_os = ad7606_write_os_hw;
>
> @@ -685,6 +776,10 @@ int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
> "adi,sw-mode");
>
> if (st->sw_mode_en) {
> + /* Scale of 0.076293 is only available in sw mode */
> + st->scale_avail = ad7616_sw_scale_avail;
> + st->num_scales = ARRAY_SIZE(ad7616_sw_scale_avail);
> +
> /* After reset, in software mode, ±10 V is set by default */
> memset32(st->range, 2, ARRAY_SIZE(st->range));
> indio_dev->info = &ad7606_info_os_and_range;
Powered by blists - more mailing lists