linux-kernel - [PATCH 0/5] drm/meson: Add support for HDMI2.0 YUV420 4k60

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20190520133753.23871-1-narmstrong@baylibre.com>
Date:   Mon, 20 May 2019 15:37:48 +0200
From:   Neil Armstrong <narmstrong@...libre.com>
To:     a.hajda@...sung.com, Laurent.pinchart@...asonboard.com
Cc:     jonas@...boo.se, hverkuil@...all.nl,
        Neil Armstrong <narmstrong@...libre.com>,
        dri-devel@...ts.freedesktop.org, jernej.skrabec@...l.net,
        heiko@...ech.de, maxime.ripard@...tlin.com, hjc@...k-chips.com,
        linux-amlogic@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [PATCH 0/5] drm/meson: Add support for HDMI2.0 YUV420 4k60

The Synopsys DW-HDMI CSC does not support downsampling to YUV420, so
the encoder must downsamle before, feeding the controller with a YUV420
pixel stream.

The encoder must declare the new bus format enc encoding the bridge, in
order to take it in account.

To solve this, a new format_set() bridge op is added, permitting setting
a new input bus format and encoding to the bridge chain.

This solves YUV420 setup, but also solved setting 10bit, 12bit or 16bit
input bus format in order to support HDMI >8bit depths.

The DW-HDMI controller is updated to dynamically select a coherent output
bus format depending on the input bus format and on the internal CSC
supported modes.

The DW-HDMI is also updated to support the connector display_info bus_formats
entry to permit forcing a specific output bus format to force, for example,
an YUV444 output format instead of the default RGB output bus format.

Only the meson DRM dw_hdmi glue allows ycbcr420 modes, so no breakage
is expected here.

The remaining patches adds support for 4:2:0 output and clock setup for
the meson DW-HDMI glue, and how YUV444 output can be forced.

Changes since rfc:
* Fixed small logic error in drm_bridge_format_set()
* rebased on v5.2-rc1

Neil Armstrong (5):
  drm/bridge: dw-hdmi: allow ycbcr420 modes for >= 0x200a
  drm/bridge: add encoder support to specify bridge input format
  drm/bridge: dw-hdmi: Add support for dynamic output format setup
  drm/meson: Add YUV420 output support
  drm/meson: Output in YUV444 if sink supports it

 drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 127 ++++++++++++++++++++--
 drivers/gpu/drm/drm_bridge.c              |  35 ++++++
 drivers/gpu/drm/meson/meson_dw_hdmi.c     | 111 ++++++++++++++++---
 drivers/gpu/drm/meson/meson_vclk.c        |  93 ++++++++++++----
 drivers/gpu/drm/meson/meson_vclk.h        |   7 +-
 drivers/gpu/drm/meson/meson_venc.c        |   6 +-
 drivers/gpu/drm/meson/meson_venc.h        |  11 ++
 drivers/gpu/drm/meson/meson_venc_cvbs.c   |   3 +-
 include/drm/bridge/dw_hdmi.h              |   1 +
 include/drm/drm_bridge.h                  |  19 ++++
 10 files changed, 358 insertions(+), 55 deletions(-)

-- 
2.21.0