linux-kernel - Re: [PATCH 1/2] ARM: dts: rockchip: Limit GPU frequency on veyron mickey to 300 MHz when the CPU gets very hot

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 20 May 2019 22:28:00 +0200
From:   Heiko Stübner <heiko@...ech.de>
To:     Doug Anderson <dianders@...omium.org>
Cc:     Matthias Kaehlcke <mka@...omium.org>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Linux ARM <linux-arm-kernel@...ts.infradead.org>,
        "open list:ARM/Rockchip SoC..." <linux-rockchip@...ts.infradead.org>,
        devicetree@...r.kernel.org, LKML <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 1/2] ARM: dts: rockchip: Limit GPU frequency on veyron mickey to 300 MHz when the CPU gets very hot

Am Montag, 20. Mai 2019, 22:16:46 CEST schrieb Doug Anderson:
> Hi,
> 
> On Mon, May 20, 2019 at 10:01 AM Matthias Kaehlcke <mka@...omium.org> wrote:
> >
> > On rk3288 the CPU and GPU temperatures are correlated. Limit the GPU
> > frequency on veyron mickey to 300 MHz for CPU temperatures >= 85°C.
> >
> > This matches the configuration of the downstream Chrome OS 3.14 kernel,
> > the 'official' kernel for mickey.
> >
> > Signed-off-by: Matthias Kaehlcke <mka@...omium.org>
> > ---
> > Note: this patch depends on "ARM: dts: rockchip: Add #cooling-cells
> > entry for rk3288 GPU" (https://lore.kernel.org/patchwork/patch/1075005/)
> > ---
> >  arch/arm/boot/dts/rk3288-veyron-mickey.dts | 6 ++++++
> >  1 file changed, 6 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/rk3288-veyron-mickey.dts b/arch/arm/boot/dts/rk3288-veyron-mickey.dts
> > index d889ab3c8235..f118d92a49d0 100644
> > --- a/arch/arm/boot/dts/rk3288-veyron-mickey.dts
> > +++ b/arch/arm/boot/dts/rk3288-veyron-mickey.dts
> > @@ -125,6 +125,12 @@
> >                                          <&cpu2 8 THERMAL_NO_LIMIT>,
> >                                          <&cpu3 8 THERMAL_NO_LIMIT>;
> >                 };
> > +
> > +               /* At very hot, don't let GPU go over 300 MHz */
> > +               cpu_very_hot_limit_gpu {
> > +                       trip = <&cpu_alert_very_hot>;
> > +                       cooling-device = <&gpu 2 2>;
> > +               };
> 
> Two things:
> 
> A) If I'm reading things properly, you're actually limiting things to
> 400 MHz.  This is because you don't have <https://crrev.com/c/1574579>
> which deletes the 500 MHz GPU operating point.  So on upstream the
> available points are:
> 
> 0: 600 MHz
> 1: 500 MHz
> 2: 400 MHz
> 3: 300 MHz
> 4: 200 MHz
> 5: 100 MHz
> 
> ...and downstream:
> 
> 0: 600 MHz
> 1: 400 MHz
> 2: 300 MHz
> 3: 200 MHz
> 4: 100 MHz
> 
> Thinking about it more, I bet Heiko would actually be OK deleting the
> 500 MHz GPU operating point for veyron.  Technically it's not needed
> upstream because upstream doesn't have our hacks to allow re-purposing
> NPLL for HDMI (so they _can_ make 500 MHz) but maybe we can make the
> argument that these laptops have only ever been tested with the 500
> MHz operating point removed and also that eventually someonje will
> probably figure out a way to re-purpose NPLL for HDMI even upstream...

Yeah. Dropping the opp sounds sensible ... for the npll-related thing
and also if you're really running into thermal constraints it might be
good to give the system a bit more breathing room?


Heiko


> B) It seems like in the same patch you'd want to introduce
> "cpu_warm_limit_gpu", AKA:
> 
> cpu_warm_limit_gpu {
>   trip = <&cpu_alert_warm>;
>   cooling-device =
>   <&gpu 1 1>;
> };
> 
> 
> -Doug