lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190520225007.2308-4-jmkrzyszt@gmail.com>
Date:   Tue, 21 May 2019 00:50:01 +0200
From:   Janusz Krzysztofik <jmkrzyszt@...il.com>
To:     Mauro Carvalho Chehab <mchehab@...nel.org>
Cc:     Sakari Ailus <sakari.ailus@...ux.intel.com>,
        Hans Verkuil <hverkuil-cisco@...all.nl>,
        linux-media@...r.kernel.org, linux-kernel@...r.kernel.org,
        Janusz Krzysztofik <jmkrzyszt@...il.com>,
        stable@...r.kernel.org
Subject: [PATCH v2 3/9] media: ov6650: Fix crop rectangle alignment not passed back

Commit 4f996594ceaf ("[media] v4l2: make vidioc_s_crop const")
introduced a writable copy of constified user requested crop rectangle
in order to be able to perform hardware alignments on it.  Later
on, commit 10d5509c8d50 ("[media] v4l2: remove g/s_crop from video
ops") replaced s_crop() video operaion using that const argument with
set_selection() pad operation which had a corresponding argument not
constified, however the original behavior of the driver was not
restored.  Since that time, any hardware alignment applied on a user
requested crop rectangle is not passed back to the user calling
.set_selection() as it should be.

Fix the issue by dropping the copy and replacing all references to it
with references to the crop rectangle embedded in the user argument.

Fixes: 10d5509c8d50 ("[media] v4l2: remove g/s_crop from video ops")
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@...il.com>
Cc: stable@...r.kernel.org
---
 drivers/media/i2c/ov6650.c | 31 +++++++++++++++----------------
 1 file changed, 15 insertions(+), 16 deletions(-)

diff --git a/drivers/media/i2c/ov6650.c b/drivers/media/i2c/ov6650.c
index 007f0ca24913..751b48483f27 100644
--- a/drivers/media/i2c/ov6650.c
+++ b/drivers/media/i2c/ov6650.c
@@ -468,38 +468,37 @@ static int ov6650_set_selection(struct v4l2_subdev *sd,
 {
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
 	struct ov6650 *priv = to_ov6650(client);
-	struct v4l2_rect rect = sel->r;
 	int ret;
 
 	if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE ||
 	    sel->target != V4L2_SEL_TGT_CROP)
 		return -EINVAL;
 
-	v4l_bound_align_image(&rect.width, 2, W_CIF, 1,
-			      &rect.height, 2, H_CIF, 1, 0);
-	v4l_bound_align_image(&rect.left, DEF_HSTRT << 1,
-			      (DEF_HSTRT << 1) + W_CIF - (__s32)rect.width, 1,
-			      &rect.top, DEF_VSTRT << 1,
-			      (DEF_VSTRT << 1) + H_CIF - (__s32)rect.height, 1,
-			      0);
+	v4l_bound_align_image(&sel->r.width, 2, W_CIF, 1,
+			      &sel->r.height, 2, H_CIF, 1, 0);
+	v4l_bound_align_image(&sel->r.left, DEF_HSTRT << 1,
+			      (DEF_HSTRT << 1) + W_CIF - (__s32)sel->r.width, 1,
+			      &sel->r.top, DEF_VSTRT << 1,
+			      (DEF_VSTRT << 1) + H_CIF - (__s32)sel->r.height,
+			      1, 0);
 
-	ret = ov6650_reg_write(client, REG_HSTRT, rect.left >> 1);
+	ret = ov6650_reg_write(client, REG_HSTRT, sel->r.left >> 1);
 	if (!ret) {
-		priv->rect.left = rect.left;
+		priv->rect.left = sel->r.left;
 		ret = ov6650_reg_write(client, REG_HSTOP,
-				(rect.left + rect.width) >> 1);
+				       (sel->r.left + sel->r.width) >> 1);
 	}
 	if (!ret) {
-		priv->rect.width = rect.width;
-		ret = ov6650_reg_write(client, REG_VSTRT, rect.top >> 1);
+		priv->rect.width = sel->r.width;
+		ret = ov6650_reg_write(client, REG_VSTRT, sel->r.top >> 1);
 	}
 	if (!ret) {
-		priv->rect.top = rect.top;
+		priv->rect.top = sel->r.top;
 		ret = ov6650_reg_write(client, REG_VSTOP,
-				(rect.top + rect.height) >> 1);
+				       (sel->r.top + sel->r.height) >> 1);
 	}
 	if (!ret)
-		priv->rect.height = rect.height;
+		priv->rect.height = sel->r.height;
 
 	return ret;
 }
-- 
2.21.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ