| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <40509b95-0e64-f533-cc78-6ebc81daf321@nvidia.com>
Date: Wed, 22 May 2019 01:07:49 +0530
From: Vidya Sagar <vidyas@...dia.com>
To: Thierry Reding <thierry.reding@...il.com>
CC: <lorenzo.pieralisi@....com>, <bhelgaas@...gle.com>,
<robh+dt@...nel.org>, <mark.rutland@....com>,
<jonathanh@...dia.com>, <kishon@...com>, <catalin.marinas@....com>,
<will.deacon@....com>, <jingoohan1@...il.com>,
<gustavo.pimentel@...opsys.com>, <mperttunen@...dia.com>,
<linux-pci@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-tegra@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <kthota@...dia.com>,
<mmaddireddy@...dia.com>, <sagar.tv@...il.com>
Subject: Re: [PATCH V7 13/15] phy: tegra: Add PCIe PIPE2UPHY support
On 5/21/2019 4:30 PM, Thierry Reding wrote:
> On Fri, May 17, 2019 at 06:08:44PM +0530, Vidya Sagar wrote:
>> Synopsys DesignWare core based PCIe controllers in Tegra 194 SoC interface
>> with Universal PHY (UPHY) module through a PIPE2UPHY (P2U) module.
>> For each PCIe lane of a controller, there is a P2U unit instantiated at
>> hardware level. This driver provides support for the programming required
>> for each P2U that is going to be used for a PCIe controller.
>>
>> Signed-off-by: Vidya Sagar <vidyas@...dia.com>
>> ---
>> Changes since [v6]:
>> * None
>>
>> Changes since [v5]:
>> * Addressed review comments from Thierry
>>
>> Changes since [v4]:
>> * None
>>
>> Changes since [v3]:
>> * Rebased on top of linux-next top of the tree
>>
>> Changes since [v2]:
>> * Replaced spaces with tabs in Kconfig file
>> * Sorted header file inclusion alphabetically
>>
>> Changes since [v1]:
>> * Added COMPILE_TEST in Kconfig
>> * Removed empty phy_ops implementations
>> * Modified code according to DT documentation file modifications
>>
>> drivers/phy/tegra/Kconfig | 7 ++
>> drivers/phy/tegra/Makefile | 1 +
>> drivers/phy/tegra/pcie-p2u-tegra194.c | 109 ++++++++++++++++++++++++++
>> 3 files changed, 117 insertions(+)
>> create mode 100644 drivers/phy/tegra/pcie-p2u-tegra194.c
>>
>> diff --git a/drivers/phy/tegra/Kconfig b/drivers/phy/tegra/Kconfig
>> index a3b1de953fb7..06d423fa85b4 100644
>> --- a/drivers/phy/tegra/Kconfig
>> +++ b/drivers/phy/tegra/Kconfig
>> @@ -6,3 +6,10 @@ config PHY_TEGRA_XUSB
>>
>> To compile this driver as a module, choose M here: the module will
>> be called phy-tegra-xusb.
>> +
>> +config PHY_TEGRA194_PCIE_P2U
>> + tristate "NVIDIA Tegra P2U PHY Driver"
>
> The Kconfig symbol and driver are named inconsistently. That's not
> inherently wrong, but I think it unnecessarily complicates things. Why
> not just do something like:
>
> config PHY_TEGRA194_P2U
>
> and name the driver...
Ok. Done.
>
>> + depends on ARCH_TEGRA || COMPILE_TEST
>> + select GENERIC_PHY
>> + help
>> + Enable this to support the P2U (PIPE to UPHY) that is part of Tegra 19x SOCs.
>> diff --git a/drivers/phy/tegra/Makefile b/drivers/phy/tegra/Makefile
>> index a93cd9a499b2..1aaca794f40c 100644
>> --- a/drivers/phy/tegra/Makefile
>> +++ b/drivers/phy/tegra/Makefile
>> @@ -5,3 +5,4 @@ phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_124_SOC) += xusb-tegra124.o
>> phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_132_SOC) += xusb-tegra124.o
>> phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_210_SOC) += xusb-tegra210.o
>> phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_186_SOC) += xusb-tegra186.o
>> +obj-$(CONFIG_PHY_TEGRA194_PCIE_P2U) += pcie-p2u-tegra194.o
>
> ... phy-tegra194-p2u here? Or perhaps even leave away the 194 and make
> it just phy-tegra-p2u. That would make it consistent with the
> phy-tegra-xusb driver.
I'll go with phy-tegra194-p2u here as P2U is present only starting from T194.
>
> Looks good otherwise.
>
> Thierry
>
>> diff --git a/drivers/phy/tegra/pcie-p2u-tegra194.c b/drivers/phy/tegra/pcie-p2u-tegra194.c
>> new file mode 100644
>> index 000000000000..fae2afe1a1aa
>> --- /dev/null
>> +++ b/drivers/phy/tegra/pcie-p2u-tegra194.c
>> @@ -0,0 +1,109 @@
>> +// SPDX-License-Identifier: GPL-2.0+
>> +/*
>> + * P2U (PIPE to UPHY) driver for Tegra T194 SoC
>> + *
>> + * Copyright (C) 2019 NVIDIA Corporation.
>> + *
>> + * Author: Vidya Sagar <vidyas@...dia.com>
>> + */
>> +
>> +#include <linux/err.h>
>> +#include <linux/io.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/of_platform.h>
>> +#include <linux/phy/phy.h>
>> +
>> +#define P2U_PERIODIC_EQ_CTRL_GEN3 0xc0
>> +#define P2U_PERIODIC_EQ_CTRL_GEN3_PERIODIC_EQ_EN BIT(0)
>> +#define P2U_PERIODIC_EQ_CTRL_GEN3_INIT_PRESET_EQ_TRAIN_EN BIT(1)
>> +#define P2U_PERIODIC_EQ_CTRL_GEN4 0xc4
>> +#define P2U_PERIODIC_EQ_CTRL_GEN4_INIT_PRESET_EQ_TRAIN_EN BIT(1)
>> +
>> +#define P2U_RX_DEBOUNCE_TIME 0xa4
>> +#define P2U_RX_DEBOUNCE_TIME_DEBOUNCE_TIMER_MASK 0xffff
>> +#define P2U_RX_DEBOUNCE_TIME_DEBOUNCE_TIMER_VAL 160
>> +
>> +struct tegra_p2u {
>> + void __iomem *base;
>> +};
>> +
>> +static int tegra_p2u_power_on(struct phy *x)
>> +{
>> + struct tegra_p2u *phy = phy_get_drvdata(x);
>> + u32 val;
>> +
>> + val = readl(phy->base + P2U_PERIODIC_EQ_CTRL_GEN3);
>> + val &= ~P2U_PERIODIC_EQ_CTRL_GEN3_PERIODIC_EQ_EN;
>> + val |= P2U_PERIODIC_EQ_CTRL_GEN3_INIT_PRESET_EQ_TRAIN_EN;
>> + writel(val, phy->base + P2U_PERIODIC_EQ_CTRL_GEN3);
>> +
>> + val = readl(phy->base + P2U_PERIODIC_EQ_CTRL_GEN4);
>> + val |= P2U_PERIODIC_EQ_CTRL_GEN4_INIT_PRESET_EQ_TRAIN_EN;
>> + writel(val, phy->base + P2U_PERIODIC_EQ_CTRL_GEN4);
>> +
>> + val = readl(phy->base + P2U_RX_DEBOUNCE_TIME);
>> + val &= ~P2U_RX_DEBOUNCE_TIME_DEBOUNCE_TIMER_MASK;
>> + val |= P2U_RX_DEBOUNCE_TIME_DEBOUNCE_TIMER_VAL;
>> + writel(val, phy->base + P2U_RX_DEBOUNCE_TIME);
>> +
>> + return 0;
>> +}
>> +
>> +static const struct phy_ops ops = {
>> + .power_on = tegra_p2u_power_on,
>> + .owner = THIS_MODULE,
>> +};
>> +
>> +static int tegra_p2u_probe(struct platform_device *pdev)
>> +{
>> + struct phy_provider *phy_provider;
>> + struct device *dev = &pdev->dev;
>> + struct phy *generic_phy;
>> + struct tegra_p2u *phy;
>> + struct resource *res;
>> +
>> + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
>> + if (!phy)
>> + return -ENOMEM;
>> +
>> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctl");
>> + phy->base = devm_ioremap_resource(dev, res);
>> + if (IS_ERR(phy->base))
>> + return PTR_ERR_OR_ZERO(phy->base);
>> +
>> + platform_set_drvdata(pdev, phy);
>> +
>> + generic_phy = devm_phy_create(dev, NULL, &ops);
>> + if (IS_ERR(generic_phy))
>> + return PTR_ERR_OR_ZERO(generic_phy);
>> +
>> + phy_set_drvdata(generic_phy, phy);
>> +
>> + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
>> + if (IS_ERR(phy_provider))
>> + return PTR_ERR_OR_ZERO(phy_provider);
>> +
>> + return 0;
>> +}
>> +
>> +static const struct of_device_id tegra_p2u_id_table[] = {
>> + {
>> + .compatible = "nvidia,tegra194-p2u",
>> + },
>> + {}
>> +};
>> +MODULE_DEVICE_TABLE(of, tegra_p2u_id_table);
>> +
>> +static struct platform_driver tegra_p2u_driver = {
>> + .probe = tegra_p2u_probe,
>> + .driver = {
>> + .name = "tegra194-p2u",
>> + .of_match_table = tegra_p2u_id_table,
>> + },
>> +};
>> +module_platform_driver(tegra_p2u_driver);
>> +
>> +MODULE_AUTHOR("Vidya Sagar <vidyas@...dia.com>");
>> +MODULE_DESCRIPTION("NVIDIA Tegra PIPE2UPHY PHY driver");
>> +MODULE_LICENSE("GPL v2");
>> --
>> 2.17.1
>>
Powered by blists - more mailing lists