[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <6ba8698f-0c05-5293-4811-2f632bf1b047@st.com>
Date: Tue, 21 May 2019 12:03:55 +0200
From: Alexandre Torgue <alexandre.torgue@...com>
To: Hugues Fruchet <hugues.fruchet@...com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>
CC: <linux-arm-kernel@...ts.infradead.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-stm32@...md-mailman.stormreply.com>
Subject: Re: [PATCH 0/4] Enable stm32mp1 camera support
Dear Hugues,
On 2/28/19 3:25 PM, Hugues Fruchet wrote:
> This patchset serie enables camera of stm32mp157c evaluation board.
> To do so, both stm32mp157c DCMI camera interface driver and OV5640 camera
> module driver are enabled in devicetree.
>
> DCMI camera interface driver is enabled by default in multi_v7 configuration
> but OV5640 driver remains to be selected at kernel configuration time.
>
> This patchset depends on STMicroelectronics Multi-Function eXpander
> (STMFX) support [1].
>
> [1] https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg1944108.html
>
> Hugues Fruchet (4):
> ARM: dts: stm32: add 2v8 fixed regulator for stm32mp157c-ed1 board
> ARM: dts: stm32: add DCMI camera interface support on stm32mp157c
> ARM: dts: stm32: add DCMI pins to stm32mp157c
> ARM: dts: stm32: enable OV5640 camera on stm32mp157c-ev1 board
>
> arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 41 ++++++++++++++++++++++
> arch/arm/boot/dts/stm32mp157c-ed1.dts | 8 +++++
> arch/arm/boot/dts/stm32mp157c-ev1.dts | 56 +++++++++++++++++++++++++++++++
> arch/arm/boot/dts/stm32mp157c.dtsi | 12 +++++++
> 4 files changed, 117 insertions(+)
>
Patch 2 to 4 applied on stm32-next. Patch 1 is no longer needed as
regulators are now provided by PMIC.
thanks
Alex
Powered by blists - more mailing lists