[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20190521102903.GC29166@ulmo>
Date: Tue, 21 May 2019 12:29:03 +0200
From: Thierry Reding <thierry.reding@...il.com>
To: Vidya Sagar <vidyas@...dia.com>
Cc: lorenzo.pieralisi@....com, bhelgaas@...gle.com, robh+dt@...nel.org,
mark.rutland@....com, jonathanh@...dia.com, kishon@...com,
catalin.marinas@....com, will.deacon@....com, jingoohan1@...il.com,
gustavo.pimentel@...opsys.com, mperttunen@...dia.com,
linux-pci@...r.kernel.org, devicetree@...r.kernel.org,
linux-tegra@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, kthota@...dia.com,
mmaddireddy@...dia.com, sagar.tv@...il.com
Subject: Re: [PATCH V7 03/15] PCI: dwc: Perform dbi regs write lock towards
the end
On Fri, May 17, 2019 at 06:08:34PM +0530, Vidya Sagar wrote:
> Remove multiple write enable and disable sequences of dbi registers as
> Tegra194 implements writes to BAR-0 register (offset: 0x10) controlled by
> DBI write-lock enable bit thereby not allowing any further writes to BAR-0
> register in config space to take place. Hence enabling write permission at
> the start of function and disabling the same only towards the end.
>
> Signed-off-by: Vidya Sagar <vidyas@...dia.com>
> ---
> Changes since [v6]:
> * None
>
> Changes since [v5]:
> * Moved write enable to the beginning of the API and write disable to the end
>
> Changes since [v4]:
> * None
>
> Changes since [v3]:
> * None
>
> Changes since [v2]:
> * None
>
> Changes since [v1]:
> * None
>
> drivers/pci/controller/dwc/pcie-designware-host.c | 14 ++++++++------
> 1 file changed, 8 insertions(+), 6 deletions(-)
Looks good to me:
Reviewed-by: Thierry Reding <treding@...dia.com>
Thierry
>
> diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
> index f93252d0da5b..d3156446ff27 100644
> --- a/drivers/pci/controller/dwc/pcie-designware-host.c
> +++ b/drivers/pci/controller/dwc/pcie-designware-host.c
> @@ -628,6 +628,12 @@ void dw_pcie_setup_rc(struct pcie_port *pp)
> u32 val, ctrl, num_ctrls;
> struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
>
> + /*
> + * Enable DBI read-only registers for writing/updating configuration.
> + * Write permission gets disabled towards the end of this function.
> + */
> + dw_pcie_dbi_ro_wr_en(pci);
> +
> dw_pcie_setup(pci);
>
> if (!pp->ops->msi_host_init) {
> @@ -650,12 +656,10 @@ void dw_pcie_setup_rc(struct pcie_port *pp)
> dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_1, 0x00000000);
>
> /* Setup interrupt pins */
> - dw_pcie_dbi_ro_wr_en(pci);
> val = dw_pcie_readl_dbi(pci, PCI_INTERRUPT_LINE);
> val &= 0xffff00ff;
> val |= 0x00000100;
> dw_pcie_writel_dbi(pci, PCI_INTERRUPT_LINE, val);
> - dw_pcie_dbi_ro_wr_dis(pci);
>
> /* Setup bus numbers */
> val = dw_pcie_readl_dbi(pci, PCI_PRIMARY_BUS);
> @@ -687,15 +691,13 @@ void dw_pcie_setup_rc(struct pcie_port *pp)
>
> dw_pcie_wr_own_conf(pp, PCI_BASE_ADDRESS_0, 4, 0);
>
> - /* Enable write permission for the DBI read-only register */
> - dw_pcie_dbi_ro_wr_en(pci);
> /* Program correct class for RC */
> dw_pcie_wr_own_conf(pp, PCI_CLASS_DEVICE, 2, PCI_CLASS_BRIDGE_PCI);
> - /* Better disable write permission right after the update */
> - dw_pcie_dbi_ro_wr_dis(pci);
>
> dw_pcie_rd_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4, &val);
> val |= PORT_LOGIC_SPEED_CHANGE;
> dw_pcie_wr_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4, val);
> +
> + dw_pcie_dbi_ro_wr_dis(pci);
> }
> EXPORT_SYMBOL_GPL(dw_pcie_setup_rc);
> --
> 2.17.1
>
Download attachment "signature.asc" of type "application/pgp-signature" (834 bytes)
Powered by blists - more mailing lists