| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20190522220555.11626-4-lede@allycomm.com>
Date: Wed, 22 May 2019 15:05:55 -0700
From: Jeff Kletsky <lede@...ycomm.com>
To: Miquel Raynal <miquel.raynal@...tlin.com>,
Richard Weinberger <richard@....at>,
David Woodhouse <dwmw2@...radead.org>,
Brian Norris <computersforpeace@...il.com>,
Marek Vasut <marek.vasut@...il.com>,
Vignesh Raghavendra <vigneshr@...com>
Cc: Jeff Kletsky <git-commits@...ycomm.com>,
kbuild test robot <lkp@...el.com>,
linux-mtd@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [PATCH v4 3/3] mtd: spinand: Add support for GigaDevice GD5F1GQ4UFxxG
From: Jeff Kletsky <git-commits@...ycomm.com>
The GigaDevice GD5F1GQ4UFxxG SPI NAND is in current production devices
and, while it has the same logical layout as the E-series devices,
it differs in the SPI interfacing in significant ways.
This support is contingent on previous commits to:
* Add support for two-byte device IDs
* Define macros for page-read ops with three-byte addresses
http://www.gigadevice.com/datasheet/gd5f1gq4xfxxg/
Signed-off-by: Jeff Kletsky <git-commits@...ycomm.com>
Reported-by: kbuild test robot <lkp@...el.com>
---
drivers/mtd/nand/spi/gigadevice.c | 79 +++++++++++++++++++++++++------
1 file changed, 64 insertions(+), 15 deletions(-)
diff --git a/drivers/mtd/nand/spi/gigadevice.c b/drivers/mtd/nand/spi/gigadevice.c
index e5586390026a..b0c26eb5e8b6 100644
--- a/drivers/mtd/nand/spi/gigadevice.c
+++ b/drivers/mtd/nand/spi/gigadevice.c
@@ -9,11 +9,17 @@
#include <linux/mtd/spinand.h>
#define SPINAND_MFR_GIGADEVICE 0xC8
+
#define GD5FXGQ4XA_STATUS_ECC_1_7_BITFLIPS (1 << 4)
#define GD5FXGQ4XA_STATUS_ECC_8_BITFLIPS (3 << 4)
#define GD5FXGQ4UEXXG_REG_STATUS2 0xf0
+#define GD5FXGQ4UXFXXG_STATUS_ECC_MASK (7 << 4)
+#define GD5FXGQ4UXFXXG_STATUS_ECC_NO_BITFLIPS (0 << 4)
+#define GD5FXGQ4UXFXXG_STATUS_ECC_1_3_BITFLIPS (1 << 4)
+#define GD5FXGQ4UXFXXG_STATUS_ECC_UNCOR_ERROR (7 << 4)
+
static SPINAND_OP_VARIANTS(read_cache_variants,
SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
@@ -22,6 +28,14 @@ static SPINAND_OP_VARIANTS(read_cache_variants,
SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
+static SPINAND_OP_VARIANTS(read_cache_variants_f,
+ SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_X4_OP_3A(0, 1, NULL, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(0, 1, NULL, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_X2_OP_3A(0, 1, NULL, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_OP_3A(true, 0, 1, NULL, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_OP_3A(false, 0, 0, NULL, 0));
+
static SPINAND_OP_VARIANTS(write_cache_variants,
SPINAND_PROG_LOAD_X4(true, 0, NULL, 0),
SPINAND_PROG_LOAD(true, 0, NULL, 0));
@@ -59,6 +73,11 @@ static int gd5fxgq4xa_ooblayout_free(struct mtd_info *mtd, int section,
return 0;
}
+static const struct mtd_ooblayout_ops gd5fxgq4xa_ooblayout = {
+ .ecc = gd5fxgq4xa_ooblayout_ecc,
+ .free = gd5fxgq4xa_ooblayout_free,
+};
+
static int gd5fxgq4xa_ecc_get_status(struct spinand_device *spinand,
u8 status)
{
@@ -83,7 +102,7 @@ static int gd5fxgq4xa_ecc_get_status(struct spinand_device *spinand,
return -EINVAL;
}
-static int gd5fxgq4uexxg_ooblayout_ecc(struct mtd_info *mtd, int section,
+static int gd5fxgq4_variant2_ooblayout_ecc(struct mtd_info *mtd, int section,
struct mtd_oob_region *region)
{
if (section)
@@ -95,7 +114,7 @@ static int gd5fxgq4uexxg_ooblayout_ecc(struct mtd_info *mtd, int section,
return 0;
}
-static int gd5fxgq4uexxg_ooblayout_free(struct mtd_info *mtd, int section,
+static int gd5fxgq4_variant2_ooblayout_free(struct mtd_info *mtd, int section,
struct mtd_oob_region *region)
{
if (section)
@@ -108,6 +127,11 @@ static int gd5fxgq4uexxg_ooblayout_free(struct mtd_info *mtd, int section,
return 0;
}
+static const struct mtd_ooblayout_ops gd5fxgq4_variant2_ooblayout = {
+ .ecc = gd5fxgq4_variant2_ooblayout_ecc,
+ .free = gd5fxgq4_variant2_ooblayout_free,
+};
+
static int gd5fxgq4uexxg_ecc_get_status(struct spinand_device *spinand,
u8 status)
{
@@ -150,15 +174,25 @@ static int gd5fxgq4uexxg_ecc_get_status(struct spinand_device *spinand,
return -EINVAL;
}
-static const struct mtd_ooblayout_ops gd5fxgq4xa_ooblayout = {
- .ecc = gd5fxgq4xa_ooblayout_ecc,
- .free = gd5fxgq4xa_ooblayout_free,
-};
+static int gd5fxgq4ufxxg_ecc_get_status(struct spinand_device *spinand,
+ u8 status)
+{
+ switch (status & GD5FXGQ4UXFXXG_STATUS_ECC_MASK) {
+ case GD5FXGQ4UXFXXG_STATUS_ECC_NO_BITFLIPS:
+ return 0;
-static const struct mtd_ooblayout_ops gd5fxgq4uexxg_ooblayout = {
- .ecc = gd5fxgq4uexxg_ooblayout_ecc,
- .free = gd5fxgq4uexxg_ooblayout_free,
-};
+ case GD5FXGQ4UXFXXG_STATUS_ECC_1_3_BITFLIPS:
+ return 3;
+
+ case GD5FXGQ4UXFXXG_STATUS_ECC_UNCOR_ERROR:
+ return -EBADMSG;
+
+ default: /* (2 << 4) through (6 << 4) are 4-8 corrected errors */
+ return ((status & GD5FXGQ4UXFXXG_STATUS_ECC_MASK) >> 4) + 2;
+ }
+
+ return -EINVAL;
+}
static const struct spinand_info gigadevice_spinand_table[] = {
SPINAND_INFO("GD5F1GQ4xA", 0xF1,
@@ -195,25 +229,40 @@ static const struct spinand_info gigadevice_spinand_table[] = {
&write_cache_variants,
&update_cache_variants),
0,
- SPINAND_ECCINFO(&gd5fxgq4uexxg_ooblayout,
+ SPINAND_ECCINFO(&gd5fxgq4_variant2_ooblayout,
gd5fxgq4uexxg_ecc_get_status)),
+ SPINAND_INFO("GD5F1GQ4UFxxG", 0xb148,
+ NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants_f,
+ &write_cache_variants,
+ &update_cache_variants),
+ 0,
+ SPINAND_ECCINFO(&gd5fxgq4_variant2_ooblayout,
+ gd5fxgq4ufxxg_ecc_get_status)),
};
static int gigadevice_spinand_detect(struct spinand_device *spinand)
{
u8 *id = spinand->id.data;
+ u16 did;
int ret;
/*
- * For GD NANDs, There is an address byte needed to shift in before IDs
- * are read out, so the first byte in raw_id is dummy.
+ * Earlier GDF5-series devices (A,E) return [0][MID][DID]
+ * Later (F) devices return [MID][DID1][DID2]
*/
- if (id[1] != SPINAND_MFR_GIGADEVICE)
+
+ if (id[0] == SPINAND_MFR_GIGADEVICE)
+ did = (id[1] << 8) + id[2];
+ else if (id[0] == 0 && id[1] == SPINAND_MFR_GIGADEVICE)
+ did = id[2];
+ else
return 0;
ret = spinand_match_and_init(spinand, gigadevice_spinand_table,
ARRAY_SIZE(gigadevice_spinand_table),
- id[2]);
+ did);
if (ret)
return ret;
--
2.20.1
Powered by blists - more mailing lists