linux-kernel - [PATCH] soc: qcom: apr: Don't use reg for domain id

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20190522015342.29501-1-bjorn.andersson@linaro.org>
Date:   Tue, 21 May 2019 18:53:42 -0700
From:   Bjorn Andersson <bjorn.andersson@...aro.org>
To:     Andy Gross <agross@...nel.org>, Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>
Cc:     linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, srinivas.kandagatla@...aro.org
Subject: [PATCH] soc: qcom: apr: Don't use reg for domain id

The reg property represents the address and size on the bus that a
device lives, but for APR the parent is a rpmsg bus, which does not have
numerical addresses. Simply defining #address/#size-cells to 1 and 0,
respectively, to silence the compiler is not an appropriate solution.

Replace the use of "reg" with an APR specific property.

Signed-off-by: Bjorn Andersson <bjorn.andersson@...aro.org>
---

The APR device was recently added to msm8996.dtsi, but this is still
depending on working SMMU to provide functional audio support.

 Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt | 2 +-
 drivers/soc/qcom/apr.c                                  | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
index bcc612cc7423..38d3c06abc41 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
@@ -9,7 +9,7 @@ used for audio/voice services on the QDSP.
 	Value type: <stringlist>
 	Definition: must be "qcom,apr-v<VERSION-NUMBER>", example "qcom,apr-v2"
 
-- reg
+- qcom,apr-domain
 	Usage: required
 	Value type: <u32>
 	Definition: Destination processor ID.
diff --git a/drivers/soc/qcom/apr.c b/drivers/soc/qcom/apr.c
index 74f8b9607daa..b83d71b2e0a4 100644
--- a/drivers/soc/qcom/apr.c
+++ b/drivers/soc/qcom/apr.c
@@ -276,7 +276,7 @@ static int apr_probe(struct rpmsg_device *rpdev)
 	if (!apr)
 		return -ENOMEM;
 
-	ret = of_property_read_u32(dev->of_node, "reg", &apr->dest_domain_id);
+	ret = of_property_read_u32(dev->of_node, "qcom,apr-domain", &apr->dest_domain_id);
 	if (ret) {
 		dev_err(dev, "APR Domain ID not specified in DT\n");
 		return ret;
-- 
2.18.0