[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <OFB9416C97.8812436C-ON48258403.00329D12-48258403.0032E82E@mxic.com.tw>
Date: Thu, 23 May 2019 17:16:03 +0800
From: masonccyang@...c.com.tw
To: "Sergei Shtylyov" <sergei.shtylyov@...entembedded.com>
Cc: bbrezillon@...nel.org, broonie@...nel.org,
devicetree@...r.kernel.org,
"Geert Uytterhoeven" <geert+renesas@...der.be>,
"Simon Horman" <horms@...ge.net.au>, juliensu@...c.com.tw,
lee.jones@...aro.org, linux-kernel@...r.kernel.org,
linux-renesas-soc@...r.kernel.org, linux-spi@...r.kernel.org,
marek.vasut@...il.com, mark.rutland@....com,
miquel.raynal@...tlin.com, robh+dt@...nel.org
Subject: Re: [PATCH v13 3/3] dt-bindings: mfd: Document Renesas R-Car Gen3 RPC-IF
controller bindings
Hi Sergei,
> On 05/21/2019 10:19 AM, Mason Yang wrote:
>
> > Document the bindings used by the Renesas R-Car Gen3 RPC-IF
controller.
> >
> > Signed-off-by: Mason Yang <masonccyang@...c.com.tw>
> > ---
> > .../devicetree/bindings/mfd/renesas-rpc-if.txt | 65
++++++++++++++++++++++
> > 1 file changed, 65 insertions(+)
> > create mode 100644
Documentation/devicetree/bindings/mfd/renesas-rpc-if.txt
> >
> > diff --git a/Documentation/devicetree/bindings/mfd/renesas-rpc-if.txt
b/
> Documentation/devicetree/bindings/mfd/renesas-rpc-if.txt
> > new file mode 100644
> > index 0000000..20ec85b
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/mfd/renesas-rpc-if.txt
> > @@ -0,0 +1,65 @@
> > +Renesas R-Car Gen3 RPC-IF controller Device Tree Bindings
> > +---------------------------------------------------------
> > +
> > +RPC-IF supports both SPI NOR and HyperFlash (CFI-compliant flash)
> > +
> > +Required properties:
> > +- compatible: should be an SoC-specific compatible value, followed by
> > + "renesas,rcar-gen3-rpc" as a fallback.
> > + supported SoC-specific values are:
> > + "renesas,r8a77995-rpc" (R-Car D3)
> > +- reg: should contain three register areas:
> > + first for RPC-IF registers,
> > + second for the direct mapping read mode and
> > + third for the write buffer area.
> > +- reg-names: should contain "regs", "dirmap" and "wbuf"
> > +- clocks: should contain 1 entries for the module's clock
> > +- clock-names: should contain "rpc"
> > +- power-domains: should contain system-controller(sysc) for
power-domain-cell
> > +- resets: should contain clock pulse generator(cpg) for reset-cell,
> > + power-domain-cell and clock-cell
>
> That's just some nonsense, sorry...
> I suggest that you stop reposting your patches as I'm going to post
> my version of this patchset RSN (based on your patches, of course) and
I'm
> going to take care of fixing this file as well.
okay, just let me know your patch then.
thanks & best regards,
Mason
CONFIDENTIALITY NOTE:
This e-mail and any attachments may contain confidential information
and/or personal data, which is protected by applicable laws. Please be
reminded that duplication, disclosure, distribution, or use of this e-mail
(and/or its attachments) or any part thereof is prohibited. If you receive
this e-mail in error, please notify us immediately and delete this mail as
well as its attachment(s) from your system. In addition, please be
informed that collection, processing, and/or use of personal data is
prohibited unless expressly permitted by personal data protection laws.
Thank you for your attention and cooperation.
Macronix International Co., Ltd.
=====================================================================
============================================================================
CONFIDENTIALITY NOTE:
This e-mail and any attachments may contain confidential information and/or personal data, which is protected by applicable laws. Please be reminded that duplication, disclosure, distribution, or use of this e-mail (and/or its attachments) or any part thereof is prohibited. If you receive this e-mail in error, please notify us immediately and delete this mail as well as its attachment(s) from your system. In addition, please be informed that collection, processing, and/or use of personal data is prohibited unless expressly permitted by personal data protection laws. Thank you for your attention and cooperation.
Macronix International Co., Ltd.
=====================================================================
Powered by blists - more mailing lists