Date:   Thu, 23 May 2019 14:49:00 +0100 (BST)
From:   Mark Brown <broonie@...nel.org>
To:     Rob Herring <robh@...nel.org>
Cc:     devicetree@...r.kernel.org, Liam Girdwood <lgirdwood@...il.com>,
        linux-kernel@...r.kernel.org, Mark Brown <broonie@...nel.org>
Subject: Applied "regulator: Convert regulator binding to json-schema" to the regulator tree

The patch

   regulator: Convert regulator binding to json-schema

has been applied to the regulator tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.3

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From 1914a996436b09186489da73b807e1df71259f67 Mon Sep 17 00:00:00 2001
From: Rob Herring <robh@...nel.org>
Date: Tue, 21 May 2019 16:20:29 -0500
Subject: [PATCH] regulator: Convert regulator binding to json-schema

Convert the common regulator binding to DT schema format. Note that all
the properties with standard unit suffixes have type checks already, so
only a description is necessary.

As fixed-regulator has already been converted, update the references in
it. Otherwise, keep regulator.txt with a reference to the schema to
avoid a bunch of treewide updates. regulator.txt can be removed when all
the regulator bindings are converted.

Signed-off-by: Rob Herring <robh@...nel.org>
Signed-off-by: Mark Brown <broonie@...nel.org>
---
 .../bindings/regulator/fixed-regulator.yaml   |   5 +-
 .../bindings/regulator/regulator.txt          | 140 +-----------
 .../bindings/regulator/regulator.yaml         | 200 ++++++++++++++++++
 3 files changed, 205 insertions(+), 140 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/regulator/regulator.yaml

diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
index d289c2f7455a..a650b457085d 100644
--- a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
@@ -12,10 +12,13 @@ maintainers:
 
 description:
   Any property defined as part of the core regulator binding, defined in
-  regulator.txt, can also be used. However a fixed voltage regulator is
+  regulator.yaml, can also be used. However a fixed voltage regulator is
   expected to have the regulator-min-microvolt and regulator-max-microvolt
   to be the same.
 
+allOf:
+  - $ref: "regulator.yaml#"
+
 properties:
   compatible:
     const: regulator-fixed
diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt
index 0a3f087d5844..487ccd8370b3 100644
--- a/Documentation/devicetree/bindings/regulator/regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/regulator.txt
@@ -1,139 +1 @@
-Voltage/Current Regulators
-
-Optional properties:
-- regulator-name: A string used as a descriptive name for regulator outputs
-- regulator-min-microvolt: smallest voltage consumers may set
-- regulator-max-microvolt: largest voltage consumers may set
-- regulator-microvolt-offset: Offset applied to voltages to compensate for voltage drops
-- regulator-min-microamp: smallest current consumers may set
-- regulator-max-microamp: largest current consumers may set
-- regulator-input-current-limit-microamp: maximum input current regulator allows
-- regulator-always-on: boolean, regulator should never be disabled
-- regulator-boot-on: bootloader/firmware enabled regulator
-- regulator-allow-bypass: allow the regulator to go into bypass mode
-- regulator-allow-set-load: allow the regulator performance level to be configured
-- <name>-supply: phandle to the parent supply/regulator node
-- regulator-ramp-delay: ramp delay for regulator(in uV/us)
-  For hardware which supports disabling ramp rate, it should be explicitly
-  initialised to zero (regulator-ramp-delay = <0>) for disabling ramp delay.
-- regulator-enable-ramp-delay: The time taken, in microseconds, for the supply
-  rail to reach the target voltage, plus/minus whatever tolerance the board
-  design requires. This property describes the total system ramp time
-  required due to the combination of internal ramping of the regulator itself,
-  and board design issues such as trace capacitance and load on the supply.
-- regulator-settling-time-us: Settling time, in microseconds, for voltage
-  change if regulator have the constant time for any level voltage change.
-  This is useful when regulator have exponential voltage change.
-- regulator-settling-time-up-us: Settling time, in microseconds, for voltage
-  increase if the regulator needs a constant time to settle after voltage
-  increases of any level. This is useful for regulators with exponential
-  voltage changes.
-- regulator-settling-time-down-us: Settling time, in microseconds, for voltage
-  decrease if the regulator needs a constant time to settle after voltage
-  decreases of any level. This is useful for regulators with exponential
-  voltage changes.
-- regulator-soft-start: Enable soft start so that voltage ramps slowly
-- regulator-state-standby sub-root node for Standby mode
-  : equivalent with standby Linux sleep state, which provides energy savings
-  with a relatively quick transition back time.
-- regulator-state-mem sub-root node for Suspend-to-RAM mode
-  : suspend to memory, the device goes to sleep, but all data stored in memory,
-  only some external interrupt can wake the device.
-- regulator-state-disk sub-root node for Suspend-to-DISK mode
-  : suspend to disk, this state operates similarly to Suspend-to-RAM,
-  but includes a final step of writing memory contents to disk.
-- regulator-state-[mem/disk/standby] node has following common properties:
-	- regulator-on-in-suspend: regulator should be on in suspend state.
-	- regulator-off-in-suspend: regulator should be off in suspend state.
-	- regulator-suspend-min-microvolt: minimum voltage may be set in
-	  suspend state.
-	- regulator-suspend-max-microvolt: maximum voltage may be set in
-	  suspend state.
-	- regulator-suspend-microvolt: the default voltage which regulator
-	  would be set in suspend. This property is now deprecated, instead
-	  setting voltage for suspend mode via the API which regulator
-	  driver provides is recommended.
-	- regulator-changeable-in-suspend: whether the default voltage and
-	  the regulator on/off in suspend can be changed in runtime.
-	- regulator-mode: operating mode in the given suspend state.
-	  The set of possible operating modes depends on the capabilities of
-	  every hardware so the valid modes are documented on each regulator
-	  device tree binding document.
-- regulator-initial-mode: initial operating mode. The set of possible operating
-  modes depends on the capabilities of every hardware so each device binding
-  documentation explains which values the regulator supports.
-- regulator-allowed-modes: list of operating modes that software is allowed to
-  configure for the regulator at run-time.  Elements may be specified in any
-  order.  The set of possible operating modes depends on the capabilities of
-  every hardware so each device binding document explains which values the
-  regulator supports.
-- regulator-system-load: Load in uA present on regulator that is not captured by
-  any consumer request.
-- regulator-pull-down: Enable pull down resistor when the regulator is disabled.
-- regulator-over-current-protection: Enable over current protection.
-- regulator-active-discharge: tristate, enable/disable active discharge of
-  regulators. The values are:
-	0: Disable active discharge.
-	1: Enable active discharge.
-	Absence of this property will leave configuration to default.
-- regulator-coupled-with: Regulators with which the regulator
-  is coupled. The linkage is 2-way - all coupled regulators should be linked
-  with each other. A regulator should not be coupled with its supplier.
-- regulator-coupled-max-spread: Array of maximum spread between voltages of
-  coupled regulators in microvolts, each value in the array relates to the
-  corresponding couple specified by the regulator-coupled-with property.
-- regulator-max-step-microvolt: Maximum difference between current and target
-  voltages that can be changed safely in a single step.
-
-Deprecated properties:
-- regulator-compatible: If a regulator chip contains multiple
-  regulators, and if the chip's binding contains a child node that
-  describes each regulator, then this property indicates which regulator
-  this child node is intended to configure. If this property is missing,
-  the node's name will be used instead.
-
-Example:
-
-	xyzreg: regulator@0 {
-		regulator-min-microvolt = <1000000>;
-		regulator-max-microvolt = <2500000>;
-		regulator-always-on;
-		vin-supply = <&vin>;
-
-		regulator-state-mem {
-			regulator-on-in-suspend;
-		};
-	};
-
-Regulator Consumers:
-Consumer nodes can reference one or more of its supplies/
-regulators using the below bindings.
-
-- <name>-supply: phandle to the regulator node
-
-These are the same bindings that a regulator in the above
-example used to reference its own supply, in which case
-its just seen as a special case of a regulator being a
-consumer itself.
-
-Example of a consumer device node (mmc) referencing two
-regulators (twl_reg1 and twl_reg2),
-
-	twl_reg1: regulator@0 {
-		...
-		...
-		...
-	};
-
-	twl_reg2: regulator@1 {
-		...
-		...
-		...
-	};
-
-	mmc: mmc@0 {
-		...
-		...
-		vmmc-supply = <&twl_reg1>;
-		vmmcaux-supply = <&twl_reg2>;
-	};
+This file has moved to regulator.yaml.
diff --git a/Documentation/devicetree/bindings/regulator/regulator.yaml b/Documentation/devicetree/bindings/regulator/regulator.yaml
new file mode 100644
index 000000000000..02c3043ce419
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/regulator.yaml
@@ -0,0 +1,200 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Voltage/Current Regulators
+
+maintainers:
+  - Liam Girdwood <lgirdwood@...il.com>
+  - Mark Brown <broonie@...nel.org>
+
+properties:
+  regulator-name:
+    description: A string used as a descriptive name for regulator outputs
+    $ref: "/schemas/types.yaml#/definitions/string"
+
+  regulator-min-microvolt:
+    description: smallest voltage consumers may set
+
+  regulator-max-microvolt:
+    description: largest voltage consumers may set
+
+  regulator-microvolt-offset:
+    description: Offset applied to voltages to compensate for voltage drops
+
+  regulator-min-microamp:
+    description: smallest current consumers may set
+
+  regulator-max-microamp:
+    description: largest current consumers may set
+
+  regulator-input-current-limit-microamp:
+    description: maximum input current regulator allows
+
+  regulator-always-on:
+    description: boolean, regulator should never be disabled
+    type: boolean
+
+  regulator-boot-on:
+    description: bootloader/firmware enabled regulator
+    type: boolean
+
+  regulator-allow-bypass:
+    description: allow the regulator to go into bypass mode
+    type: boolean
+
+  regulator-allow-set-load:
+    description: allow the regulator performance level to be configured
+    type: boolean
+
+  regulator-ramp-delay:
+    description: ramp delay for regulator(in uV/us) For hardware which supports
+      disabling ramp rate, it should be explicitly initialised to zero (regulator-ramp-delay
+      = <0>) for disabling ramp delay.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+
+  regulator-enable-ramp-delay:
+    description: The time taken, in microseconds, for the supply rail to
+      reach the target voltage, plus/minus whatever tolerance the board
+      design requires. This property describes the total system ramp time
+      required due to the combination of internal ramping of the regulator
+      itself, and board design issues such as trace capacitance and load
+      on the supply.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+
+  regulator-settling-time-us:
+    description: Settling time, in microseconds, for voltage change if regulator
+      have the constant time for any level voltage change. This is useful
+      when regulator have exponential voltage change.
+
+  regulator-settling-time-up-us:
+    description: Settling time, in microseconds, for voltage increase if
+      the regulator needs a constant time to settle after voltage increases
+      of any level. This is useful for regulators with exponential voltage
+      changes.
+
+  regulator-settling-time-down-us:
+    description: Settling time, in microseconds, for voltage decrease if
+      the regulator needs a constant time to settle after voltage decreases
+      of any level. This is useful for regulators with exponential voltage
+      changes.
+
+  regulator-soft-start:
+    description: Enable soft start so that voltage ramps slowly
+    type: boolean
+
+  regulator-initial-mode:
+    description: initial operating mode. The set of possible operating modes
+      depends on the capabilities of every hardware so each device binding
+      documentation explains which values the regulator supports.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+
+  regulator-allowed-modes:
+    description: list of operating modes that software is allowed to configure
+      for the regulator at run-time.  Elements may be specified in any order.
+      The set of possible operating modes depends on the capabilities of
+      every hardware so each device binding document explains which values
+      the regulator supports.
+    $ref: "/schemas/types.yaml#/definitions/uint32-array"
+
+  regulator-system-load:
+    description: Load in uA present on regulator that is not captured by
+      any consumer request.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+
+  regulator-pull-down:
+    description: Enable pull down resistor when the regulator is disabled.
+    type: boolean
+
+  regulator-over-current-protection:
+    description: Enable over current protection.
+    type: boolean
+
+  regulator-active-discharge:
+    description: |
+      tristate, enable/disable active discharge of regulators. The values are:
+      0: Disable active discharge.
+      1: Enable active discharge.
+      Absence of this property will leave configuration to default.
+    allOf:
+      - $ref: "/schemas/types.yaml#/definitions/uint32"
+      - enum: [ 0, 1 ]
+
+  regulator-coupled-with:
+    description: Regulators with which the regulator is coupled. The linkage
+      is 2-way - all coupled regulators should be linked with each other.
+      A regulator should not be coupled with its supplier.
+    $ref: "/schemas/types.yaml#/definitions/phandle-array"
+
+  regulator-coupled-max-spread:
+    description: Array of maximum spread between voltages of coupled regulators
+      in microvolts, each value in the array relates to the corresponding
+      couple specified by the regulator-coupled-with property.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+
+  regulator-max-step-microvolt:
+    description: Maximum difference between current and target voltages
+      that can be changed safely in a single step.
+
+patternProperties:
+  ".*-supply$":
+    description: Input supply phandle(s) for this node
+
+  regulator-state-(standby|mem|disk):
+    type: object
+    description:
+      sub-nodes for regulator state in Standby, Suspend-to-RAM, and
+      Suspend-to-DISK modes. Equivalent with standby, mem, and disk Linux
+      sleep states.
+
+    properties:
+      regulator-on-in-suspend:
+        description: regulator should be on in suspend state.
+        type: boolean
+
+      regulator-off-in-suspend:
+        description: regulator should be off in suspend state.
+        type: boolean
+
+      regulator-suspend-min-microvolt:
+        description: minimum voltage may be set in suspend state.
+
+      regulator-suspend-max-microvolt:
+        description: maximum voltage may be set in suspend state.
+
+      regulator-suspend-microvolt:
+        description: the default voltage which regulator would be set in
+          suspend. This property is now deprecated, instead setting voltage
+          for suspend mode via the API which regulator driver provides is
+          recommended.
+
+      regulator-changeable-in-suspend:
+        description: whether the default voltage and the regulator on/off
+          in suspend can be changed in runtime.
+        type: boolean
+
+      regulator-mode:
+        description: operating mode in the given suspend state. The set
+          of possible operating modes depends on the capabilities of every
+          hardware so the valid modes are documented on each regulator device
+          tree binding document.
+        $ref: "/schemas/types.yaml#/definitions/uint32"
+
+    additionalProperties: false
+
+examples:
+  - |
+    xyzreg: regulator@0 {
+      regulator-min-microvolt = <1000000>;
+      regulator-max-microvolt = <2500000>;
+      regulator-always-on;
+      vin-supply = <&vin>;
+
+      regulator-state-mem {
+        regulator-on-in-suspend;
+      };
+    };
+
+...
-- 
2.20.1

Powered by blists - more mailing lists