lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Thu, 23 May 2019 19:44:57 +0200
From:   Heiner Kallweit <hkallweit1@...il.com>
To:     Paul Menzel <pmenzel@...gen.mpg.de>,
        Realtek linux nic maintainers <nic_swsd@...ltek.com>
Cc:     netdev@...r.kernel.org,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: r8169: Link only up after 16 s (A link change request failed with
 some changes committed already. Interface enp3s0 may have been left with an
 inconsistent configuration, please check.)

On 23.05.2019 13:00, Paul Menzel wrote:
> Dear Linux folks,
> 
> 
> I optimized the Linux kernel configuration on my ASRock E350M1, and it now
> boots really fast.
> 
> Unfortunately, that seems to cause the network driver to hit some corner
> case, so that the link is supposedly down, although it should be up. The
> cable is plugged in the whole time.
> 
> ```
> [    2.990757] libphy: r8169: probed
> [    2.992661] r8169 0000:03:00.0 eth0: RTL8168e/8111e, bc:5f:f4:c8:d3:98, XID 2c2, IRQ 28
> [    2.992669] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
> [    3.294484] usb 5-2: new low-speed USB device number 2 using ohci-pci
> [    3.458711] usb 5-2: New USB device found, idVendor=1241, idProduct=1122, bcdDevice= 1.00
> [    3.458718] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> [    3.485065] input: HID 1241:1122 as /devices/pci0000:00/0000:00:12.0/usb5/5-2/5-2:1.0/0003:1241:1122.0001/input/input14
> [    3.485320] hid-generic 0003:1241:1122.0001: input,hidraw0: USB HID v1.00 Mouse [HID 1241:1122] on usb-0000:00:12.0-2/input0
> [    3.967622] random: crng init done
> [    3.967628] random: 7 urandom warning(s) missed due to ratelimiting
> [    4.323449] r8169 0000:03:00.0 enp3s0: renamed from eth0
> [    4.363774] RTL8211DN Gigabit Ethernet r8169-300:00: attached PHY driver [RTL8211DN Gigabit Ethernet] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
> [    4.576887] r8169 0000:03:00.0 enp3s0: Link is Down
> [    4.577167] A link change request failed with some changes committed already. Interface enp3s0 may have been left with an inconsistent configuration, please check.
> [   16.377520] r8169 0000:03:00.0 enp3s0: Link is Up - 100Mbps/Full - flow control rx/tx
> [   16.377553] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
> ```
> 
> It happens with all Linux kernels I tried. Please find all Linux
> messages attached.
> 
> Could you please tell me, how this can be debugged and solved?
> 
This warning is triggered by errors in do_setlink() in net/core/rtnetlink.c
I'd say:
1. Which kernel config options did you change as part of the optimization?
   (If I understand you correctly the warning didn't pop up before.)
2. Try to find out which call in do_setlink() fails and which errno is returned.

> 
> Kind regards,
> 
> Paul
> 
Heiner

Powered by blists - more mailing lists