linux-kernel - [PATCH v3 6/8] clocksource/drivers/tegra: Minor code clean up

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20190524153253.28564-7-digetx@gmail.com>
Date:   Fri, 24 May 2019 18:32:51 +0300
From:   Dmitry Osipenko <digetx@...il.com>
To:     Daniel Lezcano <daniel.lezcano@...aro.org>,
        Thomas Gleixner <tglx@...utronix.de>,
        Joseph Lo <josephl@...dia.com>,
        Thierry Reding <thierry.reding@...il.com>,
        Jonathan Hunter <jonathanh@...dia.com>,
        Peter De Schrijver <pdeschrijver@...dia.com>
Cc:     linux-tegra@...r.kernel.org, linux-kernel@...r.kernel.org,
        Nicolas Chauvet <kwizart@...il.com>
Subject: [PATCH v3 6/8] clocksource/drivers/tegra: Minor code clean up

Correct typo and use proper upper casing for acronyms in the comments,
use common style for error messages, prepend error messages with
"tegra-timer:", add error message for cpuhp_setup_state() failure and
clean up whitespaces in the code to fix checkpatch warnings.

Signed-off-by: Dmitry Osipenko <digetx@...il.com>
---
 drivers/clocksource/timer-tegra20.c | 43 ++++++++++++++++-------------
 1 file changed, 24 insertions(+), 19 deletions(-)

diff --git a/drivers/clocksource/timer-tegra20.c b/drivers/clocksource/timer-tegra20.c
index 18b81d814b3b..12784a82fd57 100644
--- a/drivers/clocksource/timer-tegra20.c
+++ b/drivers/clocksource/timer-tegra20.c
@@ -15,6 +15,8 @@
  *
  */
 
+#define pr_fmt(fmt)	"tegra-timer: " fmt
+
 #include <linux/clk.h>
 #include <linux/clockchips.h>
 #include <linux/cpu.h>
@@ -30,13 +32,13 @@
 
 #include "timer-of.h"
 
-#define RTC_SECONDS            0x08
-#define RTC_SHADOW_SECONDS     0x0c
-#define RTC_MILLISECONDS       0x10
+#define RTC_SECONDS		0x08
+#define RTC_SHADOW_SECONDS	0x0c
+#define RTC_MILLISECONDS	0x10
 
-#define TIMERUS_CNTR_1US 0x10
-#define TIMERUS_USEC_CFG 0x14
-#define TIMERUS_CNTR_FREEZE 0x4c
+#define TIMERUS_CNTR_1US	0x10
+#define TIMERUS_USEC_CFG	0x14
+#define TIMERUS_CNTR_FREEZE	0x4c
 
 #define TIMER_PTV		0x0
 #define TIMER_PTV_EN		BIT(31)
@@ -57,7 +59,7 @@ static u32 usec_config;
 static void __iomem *timer_reg_base;
 
 static int tegra_timer_set_next_event(unsigned long cycles,
-					 struct clock_event_device *evt)
+				      struct clock_event_device *evt)
 {
 	void __iomem *reg_base = timer_of_base(to_timer_of(evt));
 
@@ -178,15 +180,17 @@ static struct timer_of suspend_rtc_to = {
 
 /*
  * tegra_rtc_read - Reads the Tegra RTC registers
- * Care must be taken that this funciton is not called while the
+ * Care must be taken that this function is not called while the
  * tegra_rtc driver could be executing to avoid race conditions
  * on the RTC shadow register
  */
 static u64 tegra_rtc_read_ms(struct clocksource *cs)
 {
 	void __iomem *reg_base = timer_of_base(&suspend_rtc_to);
+
 	u32 ms = readl_relaxed(reg_base + RTC_MILLISECONDS);
 	u32 s = readl_relaxed(reg_base + RTC_SHADOW_SECONDS);
+
 	return (u64)s * MSEC_PER_SEC + ms;
 }
 
@@ -231,7 +235,7 @@ static int __init tegra_init_timer(struct device_node *np, bool tegra20)
 
 	to = this_cpu_ptr(&tegra_to);
 	ret = timer_of_init(np, to);
-	if (ret < 0)
+	if (ret)
 		goto out;
 
 	timer_reg_base = timer_of_base(to);
@@ -290,8 +294,7 @@ static int __init tegra_init_timer(struct device_node *np, bool tegra20)
 		cpu_to->clkevt.cpumask = cpumask_of(cpu);
 		cpu_to->clkevt.irq = irq_of_parse_and_map(np, idx);
 		if (!cpu_to->clkevt.irq) {
-			pr_err("%s: can't map IRQ for CPU%d\n",
-			       __func__, cpu);
+			pr_err("failed to map irq for cpu%d\n", cpu);
 			ret = -EINVAL;
 			goto out_irq;
 		}
@@ -301,8 +304,8 @@ static int __init tegra_init_timer(struct device_node *np, bool tegra20)
 				  IRQF_TIMER | IRQF_NOBALANCING,
 				  cpu_to->clkevt.name, &cpu_to->clkevt);
 		if (ret) {
-			pr_err("%s: cannot setup irq %d for CPU%d\n",
-				__func__, cpu_to->clkevt.irq, cpu);
+			pr_err("failed to set up irq for cpu%d: %d\n",
+			       cpu, ret);
 			irq_dispose_mapping(cpu_to->clkevt.irq);
 			cpu_to->clkevt.irq = 0;
 			goto out_irq;
@@ -321,11 +324,14 @@ static int __init tegra_init_timer(struct device_node *np, bool tegra20)
 	register_current_timer_delay(&tegra_delay_timer);
 #endif
 
-	cpuhp_setup_state(CPUHP_AP_TEGRA_TIMER_STARTING,
-			  "AP_TEGRA_TIMER_STARTING", tegra_timer_setup,
-			  tegra_timer_stop);
+	ret = cpuhp_setup_state(CPUHP_AP_TEGRA_TIMER_STARTING,
+				"AP_TEGRA_TIMER_STARTING", tegra_timer_setup,
+				tegra_timer_stop);
+	if (ret)
+		pr_err("failed to set up cpu hp state: %d\n", ret);
 
 	return ret;
+
 out_irq:
 	for_each_possible_cpu(cpu) {
 		struct timer_of *cpu_to;
@@ -338,6 +344,7 @@ static int __init tegra_init_timer(struct device_node *np, bool tegra20)
 	}
 out:
 	timer_of_cleanup(to);
+
 	return ret;
 }
 
@@ -361,8 +368,6 @@ static int __init tegra20_init_rtc(struct device_node *np)
 	if (ret)
 		return ret;
 
-	clocksource_register_hz(&suspend_rtc_clocksource, 1000);
-
-	return 0;
+	return clocksource_register_hz(&suspend_rtc_clocksource, 1000);
 }
 TIMER_OF_DECLARE(tegra20_rtc, "nvidia,tegra20-rtc", tegra20_init_rtc);
-- 
2.21.0