Message-ID: <20190524111444.676a4df1@jacob-builder>
Date:   Fri, 24 May 2019 11:14:44 -0700
From:   Jacob Pan <jacob.jun.pan@...ux.intel.com>
To:     Jean-Philippe Brucker <jean-philippe.brucker@....com>
Cc:     joro@...tes.org, alex.williamson@...hat.com, eric.auger@...hat.com,
        ashok.raj@...el.com, yi.l.liu@...ux.intel.com, robdclark@...il.com,
        linux-kernel@...r.kernel.org, iommu@...ts.linux-foundation.org,
        jacob.jun.pan@...ux.intel.com
Subject: Re: [PATCH 4/4] iommu: Add recoverable fault reporting

On Thu, 23 May 2019 19:06:13 +0100
Jean-Philippe Brucker <jean-philippe.brucker@....com> wrote:

> Some IOMMU hardware features, for example PCI PRI and Arm SMMU Stall,
> enable recoverable I/O page faults. Allow IOMMU drivers to report PRI
> Page Requests and Stall events through the new fault reporting API.
> The consumer of the fault can be either an I/O page fault handler in
> the host, or a guest OS.
> 
> Once handled, the fault must be completed by sending a page response
> back to the IOMMU. Add an iommu_page_response() function to complete
> a page fault.
> 
> Signed-off-by: Jacob Pan <jacob.jun.pan@...ux.intel.com>
> Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@....com>
> ---
>  drivers/iommu/iommu.c      | 95
> +++++++++++++++++++++++++++++++++++++- include/linux/iommu.h      |
> 19 ++++++++ include/uapi/linux/iommu.h | 34 ++++++++++++++
>  3 files changed, 146 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
> index d546f7baa0d4..b09b3707f0e4 100644
> --- a/drivers/iommu/iommu.c
> +++ b/drivers/iommu/iommu.c
> @@ -872,7 +872,14 @@
> EXPORT_SYMBOL_GPL(iommu_group_unregister_notifier);
>   * @data: private data passed as argument to the handler
>   *
>   * When an IOMMU fault event is received, this handler gets called
> with the
> - * fault event and data as argument. The handler should return 0 on
> success.
> + * fault event and data as argument. The handler should return 0 on
> success. If
> + * the fault is recoverable (IOMMU_FAULT_PAGE_REQ), the handler
> should also
> + * complete the fault by calling iommu_page_response() with one of
> the following
nit, in case of injecting into the guest, handler does not have to call
iommu_page_response() directly.
> + * response code:
> + * - IOMMU_PAGE_RESP_SUCCESS: retry the translation
> + * - IOMMU_PAGE_RESP_INVALID: terminate the fault
> + * - IOMMU_PAGE_RESP_FAILURE: terminate the fault and stop reporting
> + *   page faults if possible.
>   *
>   * Return 0 if the fault handler was installed successfully, or an
> error. */
> @@ -907,6 +914,8 @@ int iommu_register_device_fault_handler(struct
> device *dev, }
>  	param->fault_param->handler = handler;
>  	param->fault_param->data = data;
> +	mutex_init(&param->fault_param->lock);
> +	INIT_LIST_HEAD(&param->fault_param->faults);
>  
>  done_unlock:
>  	mutex_unlock(&param->lock);
> @@ -937,6 +946,12 @@ int iommu_unregister_device_fault_handler(struct
> device *dev) if (!param->fault_param)
>  		goto unlock;
>  
> +	/* we cannot unregister handler if there are pending faults
> */
> +	if (!list_empty(&param->fault_param->faults)) {
> +		ret = -EBUSY;
> +		goto unlock;
> +	}
> +
>  	kfree(param->fault_param);
>  	param->fault_param = NULL;
>  	put_device(dev);
> @@ -953,13 +968,15 @@
> EXPORT_SYMBOL_GPL(iommu_unregister_device_fault_handler);
>   * @evt: fault event data
>   *
>   * Called by IOMMU drivers when a fault is detected, typically in a
> threaded IRQ
> - * handler.
> + * handler. When this function fails and the fault is recoverable,
> it is the
> + * caller's responsibility to complete the fault.
>   *
>   * Return 0 on success, or an error.
>   */
>  int iommu_report_device_fault(struct device *dev, struct
> iommu_fault_event *evt) {
>  	struct iommu_param *param = dev->iommu_param;
> +	struct iommu_fault_event *evt_pending = NULL;
>  	struct iommu_fault_param *fparam;
>  	int ret = 0;
>  
> @@ -974,7 +991,27 @@ int iommu_report_device_fault(struct device
> *dev, struct iommu_fault_event *evt) ret = -EINVAL;
>  		goto done_unlock;
>  	}
> +
> +	if (evt->fault.type == IOMMU_FAULT_PAGE_REQ &&
> +	    (evt->fault.prm.flags &
> IOMMU_FAULT_PAGE_REQUEST_LAST_PAGE)) {
> +		evt_pending = kmemdup(evt, sizeof(struct
> iommu_fault_event),
> +				      GFP_KERNEL);
> +		if (!evt_pending) {
> +			ret = -ENOMEM;
> +			goto done_unlock;
> +		}
> +		mutex_lock(&fparam->lock);
> +		list_add_tail(&evt_pending->list, &fparam->faults);
> +		mutex_unlock(&fparam->lock);
> +	}
> +
>  	ret = fparam->handler(evt, fparam->data);
> +	if (ret && evt_pending) {
> +		mutex_lock(&fparam->lock);
> +		list_del(&evt_pending->list);
> +		mutex_unlock(&fparam->lock);
> +		kfree(evt_pending);
> +	}
>  done_unlock:
>  	mutex_unlock(&param->lock);
>  	return ret;
> @@ -1515,6 +1552,60 @@ int iommu_attach_device(struct iommu_domain
> *domain, struct device *dev) }
>  EXPORT_SYMBOL_GPL(iommu_attach_device);
>  
> +int iommu_page_response(struct device *dev,
> +			struct iommu_page_response *msg)
> +{
> +	bool pasid_valid;
> +	int ret = -EINVAL;
> +	struct iommu_fault_event *evt;
> +	struct iommu_fault_page_request *prm;
> +	struct iommu_param *param = dev->iommu_param;
> +	struct iommu_domain *domain = iommu_get_domain_for_dev(dev);
> +
> +	if (!domain || !domain->ops->page_response)
> +		return -ENODEV;
> +
> +	/*
> +	 * Device iommu_param should have been allocated when device
> is
> +	 * added to its iommu_group.
> +	 */
> +	if (!param || !param->fault_param)
> +		return -EINVAL;
> +
> +	/* Only send response if there is a fault report pending */
> +	mutex_lock(&param->fault_param->lock);
> +	if (list_empty(&param->fault_param->faults)) {
> +		dev_warn_ratelimited(dev, "no pending PRQ, drop
> response\n");
> +		goto done_unlock;
> +	}
> +	/*
> +	 * Check if we have a matching page request pending to
> respond,
> +	 * otherwise return -EINVAL
> +	 */
> +	list_for_each_entry(evt, &param->fault_param->faults, list) {
> +		prm = &evt->fault.prm;
> +		pasid_valid = prm->flags &
> IOMMU_FAULT_PAGE_REQUEST_PASID_VALID; +
> +		if ((pasid_valid && prm->pasid != msg->pasid) ||
> +		    prm->grpid != msg->grpid)
> +			continue;
> +
> +		/* Sanitize the reply */
> +		msg->addr = prm->addr;
> +		msg->flags = pasid_valid ?
> IOMMU_PAGE_RESP_PASID_VALID : 0; +
> +		ret = domain->ops->page_response(dev, msg,
> evt->iommu_private);
I guess here you could drop iommu_private in favor of prm such that
drivers such as vt-d can recover private data as needed?

> +		list_del(&evt->list);
> +		kfree(evt);
> +		break;
> +	}
> +
> +done_unlock:
> +	mutex_unlock(&param->fault_param->lock);
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(iommu_page_response);
> +
>  static void __iommu_detach_device(struct iommu_domain *domain,
>  				  struct device *dev)
>  {
> diff --git a/include/linux/iommu.h b/include/linux/iommu.h
> index f95e376a7ed3..a78c5f571082 100644
> --- a/include/linux/iommu.h
> +++ b/include/linux/iommu.h
> @@ -227,6 +227,7 @@ struct iommu_sva_ops {
>   * @sva_bind: Bind process address space to device
>   * @sva_unbind: Unbind process address space from device
>   * @sva_get_pasid: Get PASID associated to a SVA handle
> + * @page_response: handle page request response
>   * @pgsize_bitmap: bitmap of all possible supported page sizes
>   */
>  struct iommu_ops {
> @@ -287,6 +288,10 @@ struct iommu_ops {
>  	void (*sva_unbind)(struct iommu_sva *handle);
>  	int (*sva_get_pasid)(struct iommu_sva *handle);
>  
> +	int (*page_response)(struct device *dev,
> +			     struct iommu_page_response *msg,
> +			     u64 iommu_private);
> +
>  	unsigned long pgsize_bitmap;
>  };
>  
> @@ -311,11 +316,13 @@ struct iommu_device {
>   * unrecoverable faults such as DMA or IRQ remapping faults.
>   *
>   * @fault: fault descriptor
> + * @list: pending fault event list, used for tracking responses
>   * @iommu_private: used by the IOMMU driver for storing
> fault-specific
>   *                 data. Users should not modify this field before
>   *                 sending the fault response.
>   */
>  struct iommu_fault_event {
> +	struct list_head list;
>  	struct iommu_fault fault;
>  	u64 iommu_private;
>  };
> @@ -324,10 +331,14 @@ struct iommu_fault_event {
>   * struct iommu_fault_param - per-device IOMMU fault data
>   * @handler: Callback function to handle IOMMU faults at device level
>   * @data: handler private data
> + * @faults: holds the pending faults which needs response, e.g. page
> response.
> + * @lock: protect pending faults list
>   */
>  struct iommu_fault_param {
>  	iommu_dev_fault_handler_t handler;
>  	void *data;
> +	struct list_head faults;
> +	struct mutex lock;
>  };
>  
>  /**
> @@ -442,6 +453,8 @@ extern int
> iommu_unregister_device_fault_handler(struct device *dev); extern int
> iommu_report_device_fault(struct device *dev, struct
> iommu_fault_event *evt); 
> +extern int iommu_page_response(struct device *dev,
> +			       struct iommu_page_response *msg);
>  extern int iommu_group_id(struct iommu_group *group);
>  extern struct iommu_group *iommu_group_get_for_dev(struct device
> *dev); extern struct iommu_domain *iommu_group_default_domain(struct
> iommu_group *); @@ -769,6 +782,12 @@ int
> iommu_report_device_fault(struct device *dev, struct
> iommu_fault_event *evt) return -ENODEV; }
>  
> +static inline int iommu_page_response(struct device *dev,
> +				      struct iommu_page_response
> *msg) +{
> +	return -ENODEV;
> +}
> +
>  static inline int iommu_group_id(struct iommu_group *group)
>  {
>  	return -ENODEV;
> diff --git a/include/uapi/linux/iommu.h b/include/uapi/linux/iommu.h
> index 796402174d6c..166500036557 100644
> --- a/include/uapi/linux/iommu.h
> +++ b/include/uapi/linux/iommu.h
> @@ -115,4 +115,38 @@ struct iommu_fault {
>  		struct iommu_fault_page_request prm;
>  	};
>  };
> +
> +/**
> + * enum iommu_page_response_code - Return status of fault handlers
> + * @IOMMU_PAGE_RESP_SUCCESS: Fault has been handled and the page
> tables
> + *	populated, retry the access. This is "Success" in PCI PRI.
> + * @IOMMU_PAGE_RESP_FAILURE: General error. Drop all subsequent
> faults from
> + *	this device if possible. This is "Response Failure" in PCI
> PRI.
> + * @IOMMU_PAGE_RESP_INVALID: Could not handle this fault, don't
> retry the
> + *	access. This is "Invalid Request" in PCI PRI.
> + */
> +enum iommu_page_response_code {
> +	IOMMU_PAGE_RESP_SUCCESS = 0,
> +	IOMMU_PAGE_RESP_INVALID,
> +	IOMMU_PAGE_RESP_FAILURE,
> +};
> +
> +/**
> + * struct iommu_page_response - Generic page response information
> + * @flags: encodes whether the corresponding fields are valid
> + *         (IOMMU_FAULT_PAGE_RESPONSE_* values)
> + * @pasid: Process Address Space ID
> + * @grpid: Page Request Group Index
> + * @code: response code from &enum iommu_page_response_code
> + * @addr: page address
> + */
> +struct iommu_page_response {
> +#define IOMMU_PAGE_RESP_PASID_VALID	(1 << 0)
> +	__u32	flags;
> +	__u32	pasid;
> +	__u32	grpid;
> +	__u32	code;
> +	__u64	addr;
> +};
> +
>  #endif /* _UAPI_IOMMU_H */

[Jacob Pan]

Powered by blists - more mailing lists