linux-kernel - [PATCH 14/14] pwm: meson: add documentation to the driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20190525181133.4875-15-martin.blumenstingl@googlemail.com>
Date:   Sat, 25 May 2019 20:11:33 +0200
From:   Martin Blumenstingl <martin.blumenstingl@...glemail.com>
To:     linux-amlogic@...ts.infradead.org, linux-pwm@...r.kernel.org,
        thierry.reding@...il.com, u.kleine-koenig@...gutronix.de
Cc:     linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        Martin Blumenstingl <martin.blumenstingl@...glemail.com>,
        Neil Armstrong <narmstrong@...libre.com>
Subject: [PATCH 14/14] pwm: meson: add documentation to the driver

Add a link to the datasheet and a short summary how the hardware works.
The goal is to make it easier for other developers to understand why the
pwm-meson driver is implemented the way it is.

Suggested-by: Uwe Kleine-König <u.kleine-koenig@...gutronix.de>
Co-authored-by: Neil Armstrong <narmstrong@...libre.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
---
 drivers/pwm/pwm-meson.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c
index bb48ba85f756..6a978caba483 100644
--- a/drivers/pwm/pwm-meson.c
+++ b/drivers/pwm/pwm-meson.c
@@ -1,5 +1,23 @@
 // SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
 /*
+ * PWM controller driver for Amlogic Meson SoCs.
+ *
+ * This PWM is only a set of Gates, Dividers and Counters:
+ * PWM output is achieved by calculating a clock that permits calculating
+ * two periods (low and high). The counter then has to be set to switch after
+ * N cycles for the first half period.
+ * The hardware has no "polarity" setting. This driver reverses the period
+ * cycles (the low length is inverted with the high length) for
+ * PWM_POLARITY_INVERSED. This means that .get_state cannot read the polarity
+ * from the hardware.
+ * Setting the duty cycle will disable and re-enable the PWM output.
+ * Disabling the PWM stops the output immediately (without waiting for the
+ * current period to complete first).
+ *
+ * The public S922X datasheet contains some documentation for this PWM
+ * controller starting on page 1084:
+ * https://dl.khadas.com/Hardware/VIM2/Datasheet/S912_Datasheet_V0.220170314publicversion-Wesion.pdf
+ *
  * Copyright (c) 2016 BayLibre, SAS.
  * Author: Neil Armstrong <narmstrong@...libre.com>
  * Copyright (C) 2014 Amlogic, Inc.
-- 
2.21.0