| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20190526093355.ednxp725ui6lwoji@gofer.mess.org>
Date: Sun, 26 May 2019 10:33:57 +0100
From: Sean Young <sean@...s.org>
To: Tobias Klausmann <tobias.johannes.klausmann@....thm.de>
Cc: linux-kernel@...r.kernel.org, linux-media@...r.kernel.org,
mchehab@...nel.org
Subject: Re: [PATCH] drivers/media/dvb-frontends: Implement probe/remove for
stv6110x
Hi Tobias,
On Sun, May 12, 2019 at 04:53:06PM +0200, Tobias Klausmann wrote:
> Ping,
>
> comments for this patch are appreciated!
Sorry for not back to you earlier.
Please run script/checkpatch.pl --strict on your patch. There are several
cosmetic changes needed.
>
> Thanks,
>
> Tobias
>
>
> On 09.05.19 21:51, Tobias Klausmann wrote:
> > Refactor out the common parts of stv6110x_probe() and stv6110x_attach() into
> > separate functions.
> >
> > This provides the needed functionality to use dvb_module_probe() instead of
> > dvb_attach()!
The lines shouldn't be longer than 75 characters.
This is a great improvement. It would be nice to see an actual driver use
dvb_module_probe() rather than dvb_attach(), so that the new code paths
are used. Do you have hardware to test this?
> >
> > Signed-off-by: Tobias Klausmann <tobias.johannes.klausmann@....thm.de>
> > ---
> > drivers/media/dvb-frontends/stv6110x.c | 125 ++++++++++++++++----
> > drivers/media/dvb-frontends/stv6110x.h | 3 +
> > drivers/media/dvb-frontends/stv6110x_priv.h | 3 +-
> > 3 files changed, 109 insertions(+), 22 deletions(-)
> >
> > diff --git a/drivers/media/dvb-frontends/stv6110x.c b/drivers/media/dvb-frontends/stv6110x.c
> > index 82c002d3833a..17bc7adf3771 100644
> > --- a/drivers/media/dvb-frontends/stv6110x.c
> > +++ b/drivers/media/dvb-frontends/stv6110x.c
> > @@ -345,6 +345,33 @@ static void stv6110x_release(struct dvb_frontend *fe)
> > kfree(stv6110x);
> > }
> > +void st6110x_init_regs(struct stv6110x_state *stv6110x)
> > +{
> > + u8 default_regs[] = {0x07, 0x11, 0xdc, 0x85, 0x17, 0x01, 0xe6, 0x1e};
> > +
> > + memcpy(stv6110x->regs, default_regs, 8);
> > +}
> > +
> > +void stv6110x_setup_divider(struct stv6110x_state *stv6110x)
> > +{
> > + switch (stv6110x->config->clk_div) {
> > + default:
> > + case 1:
> > + STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL2], CTRL2_CO_DIV, 0);
> > + break;
> > + case 2:
> > + STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL2], CTRL2_CO_DIV, 1);
> > + break;
> > + case 4:
> > + STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL2], CTRL2_CO_DIV, 2);
> > + break;
> > + case 8:
> > + case 0:
> > + STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL2], CTRL2_CO_DIV, 3);
> > + break;
> > + }
> > +}
> > +
> > static const struct dvb_tuner_ops stv6110x_ops = {
> > .info = {
> > .name = "STV6110(A) Silicon Tuner",
> > @@ -354,7 +381,7 @@ static const struct dvb_tuner_ops stv6110x_ops = {
> > .release = stv6110x_release
> > };
> > -static const struct stv6110x_devctl stv6110x_ctl = {
> > +static struct stv6110x_devctl stv6110x_ctl = {
> > .tuner_init = stv6110x_init,
> > .tuner_sleep = stv6110x_sleep,
> > .tuner_set_mode = stv6110x_set_mode,
> > @@ -368,39 +395,77 @@ static const struct stv6110x_devctl stv6110x_ctl = {
> > .tuner_get_status = stv6110x_get_status,
> > };
> > +void stv6110x_set_frontend_opts(struct stv6110x_state *stv6110x)
> > +{
> > + stv6110x->frontend->tuner_priv = stv6110x;
> > + stv6110x->frontend->ops.tuner_ops = stv6110x_ops;
> > +}
> > +
> > +static struct stv6110x_devctl *stv6110x_get_devctl(struct i2c_client *client)
> > +{
> > + struct stv6110x_state *stv6110x = i2c_get_clientdata(client);
> > +
> > + dev_dbg(&client->dev, "\n");
> > +
> > + return stv6110x->devctl;
> > +}
> > +
> > +static int stv6110x_probe(struct i2c_client *client,
> > + const struct i2c_device_id *id)
> > +{
> > + struct stv6110x_config *config = client->dev.platform_data;
> > +
> > + struct stv6110x_state *stv6110x;
> > +
> > + stv6110x = kzalloc(sizeof(struct stv6110x_state), GFP_KERNEL);
This should be:
stv6110x = kzalloc(sizeof(*stv6110x), GFP_KERNEL);
> > + if (!stv6110x)
> > + return -ENOMEM;
> > +
> > + stv6110x->frontend = config->frontend;
> > + stv6110x->i2c = client->adapter;
> > + stv6110x->config = config;
> > + stv6110x->devctl = &stv6110x_ctl;
> > +
> > + st6110x_init_regs(stv6110x);
> > + stv6110x_setup_divider(stv6110x);
> > + stv6110x_set_frontend_opts(stv6110x);
> > +
> > + printk(KERN_INFO "%s: Probed STV6110x\n", __func__);
Please use dev_info().
> > +
> > + i2c_set_clientdata(client, stv6110x);
> > +
> > + /* setup callbacks */
> > + config->get_devctl = stv6110x_get_devctl;
> > +
> > + return 0;
> > +}
> > +
> > +static int stv6110x_remove(struct i2c_client *client)
> > +{
> > + struct stv6110x_state *stv6110x = i2c_get_clientdata(client);
> > +
> > + stv6110x_release(stv6110x->frontend);
> > + return 0;
> > +}
> > +
> > const struct stv6110x_devctl *stv6110x_attach(struct dvb_frontend *fe,
> > const struct stv6110x_config *config,
> > struct i2c_adapter *i2c)
> > {
> > struct stv6110x_state *stv6110x;
> > - u8 default_regs[] = {0x07, 0x11, 0xdc, 0x85, 0x17, 0x01, 0xe6, 0x1e};
> > - stv6110x = kzalloc(sizeof (struct stv6110x_state), GFP_KERNEL);
> > + stv6110x = kzalloc(sizeof(struct stv6110x_state), GFP_KERNEL);
stv6110x = kzalloc(sizeof(*stv6110x), GFP_KERNEL);
Maybe we can patch up the dvb_attach() call sites and do away with
stv6110x_attach completely. Do you have dvb hardware with this frontend
to test?
> > if (!stv6110x)
> > return NULL;
> > + stv6110x->frontend = fe;
> > stv6110x->i2c = i2c;
> > stv6110x->config = config;
> > stv6110x->devctl = &stv6110x_ctl;
> > - memcpy(stv6110x->regs, default_regs, 8);
> > - /* setup divider */
> > - switch (stv6110x->config->clk_div) {
> > - default:
> > - case 1:
> > - STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL2], CTRL2_CO_DIV, 0);
> > - break;
> > - case 2:
> > - STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL2], CTRL2_CO_DIV, 1);
> > - break;
> > - case 4:
> > - STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL2], CTRL2_CO_DIV, 2);
> > - break;
> > - case 8:
> > - case 0:
> > - STV6110x_SETFIELD(stv6110x->regs[STV6110x_CTRL2], CTRL2_CO_DIV, 3);
> > - break;
> > - }
> > + st6110x_init_regs(stv6110x);
> > + stv6110x_setup_divider(stv6110x);
> > + stv6110x_set_frontend_opts(stv6110x);
> > fe->tuner_priv = stv6110x;
> > fe->ops.tuner_ops = stv6110x_ops;
> > @@ -410,6 +475,24 @@ const struct stv6110x_devctl *stv6110x_attach(struct dvb_frontend *fe,
> > }
> > EXPORT_SYMBOL(stv6110x_attach);
> > +static const struct i2c_device_id stv6110x_id_table[] = {
> > + {"stv6110x", 0},
> > + {}
> > +};
> > +MODULE_DEVICE_TABLE(i2c, stv6110x_id_table);
> > +
> > +static struct i2c_driver stv6110x_driver = {
> > + .driver = {
> > + .name = "stv6110x",
> > + .suppress_bind_attrs = true,
> > + },
> > + .probe = stv6110x_probe,
> > + .remove = stv6110x_remove,
> > + .id_table = stv6110x_id_table,
> > +};
> > +
> > +module_i2c_driver(stv6110x_driver);
> > +
> > MODULE_AUTHOR("Manu Abraham");
> > MODULE_DESCRIPTION("STV6110x Silicon tuner");
> > MODULE_LICENSE("GPL");
> > diff --git a/drivers/media/dvb-frontends/stv6110x.h b/drivers/media/dvb-frontends/stv6110x.h
> > index 696b6e5b9e7b..7714adea5242 100644
> > --- a/drivers/media/dvb-frontends/stv6110x.h
> > +++ b/drivers/media/dvb-frontends/stv6110x.h
> > @@ -27,6 +27,9 @@ struct stv6110x_config {
> > u8 addr;
> > u32 refclk;
> > u8 clk_div; /* divisor value for the output clock */
> > + struct dvb_frontend *frontend;
> > +
> > + struct stv6110x_devctl* (*get_devctl)(struct i2c_client *);
The i2c_client needs an argument name.
> > };
> > enum tuner_mode {
> > diff --git a/drivers/media/dvb-frontends/stv6110x_priv.h b/drivers/media/dvb-frontends/stv6110x_priv.h
> > index 109dfaf4ba42..383549d25268 100644
> > --- a/drivers/media/dvb-frontends/stv6110x_priv.h
> > +++ b/drivers/media/dvb-frontends/stv6110x_priv.h
> > @@ -66,11 +66,12 @@
> > #define REFCLOCK_MHz (stv6110x->config->refclk / 1000000)
> > struct stv6110x_state {
> > + struct dvb_frontend *frontend;
> > struct i2c_adapter *i2c;
> > const struct stv6110x_config *config;
> > u8 regs[8];
> > - const struct stv6110x_devctl *devctl;
> > + struct stv6110x_devctl *devctl;
> > };
> > #endif /* __STV6110x_PRIV_H */
Thanks,
Sean
Powered by blists - more mailing lists