linux-kernel - [PATCH 09/10] arm64: dts: meson-gxbb-vega-s95: fix WiFi/BT module support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20190527132200.17377-10-narmstrong@baylibre.com>
Date:   Mon, 27 May 2019 15:21:59 +0200
From:   Neil Armstrong <narmstrong@...libre.com>
To:     khilman@...libre.com
Cc:     Neil Armstrong <narmstrong@...libre.com>,
        linux-amlogic@...ts.infradead.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        christianshewitt@...il.com
Subject: [PATCH 09/10] arm64: dts: meson-gxbb-vega-s95: fix WiFi/BT module support

Fix the SDIO WiFi support and add proper Bluetooth support on the
Vega S95 board.

Suggested-by: Christian Hewitt <christianshewitt@...il.com>
Signed-off-by: Neil Armstrong <narmstrong@...libre.com>
---
 .../boot/dts/amlogic/meson-gxbb-vega-s95.dtsi  | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
index 4d2aa4dc59e7..9b52f3dcdd49 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
@@ -93,8 +93,7 @@
 
 	sdio_pwrseq: sdio-pwrseq {
 		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>,
-				<&gpio GPIOX_20 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
 		clocks = <&wifi32k>;
 		clock-names = "ext_clock";
 	};
@@ -167,7 +166,7 @@
 /* Wireless SDIO Module */
 &sd_emmc_a {
 	status = "okay";
-	pinctrl-0 = <&sdio_pins &sdio_irq_pins>;
+	pinctrl-0 = <&sdio_pins>;
 	pinctrl-1 = <&sdio_clk_gate_pins>;
 	pinctrl-names = "default", "clk-gate";
 	#address-cells = <1>;
@@ -229,6 +228,19 @@
 	vqmmc-supply = <&vddio_boot>;
 };
 
+/* This is connected to the Bluetooth module: */
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* This UART is brought out to the DB9 connector */
 &uart_AO {
 	status = "okay";
 	pinctrl-0 = <&uart_ao_a_pins>;
-- 
2.21.0