[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190527162237.18495-7-megous@megous.com>
Date: Mon, 27 May 2019 18:22:37 +0200
From: megous@...ous.com
To: linux-sunxi@...glegroups.com,
Maxime Ripard <maxime.ripard@...tlin.com>,
Chen-Yu Tsai <wens@...e.org>, Rob Herring <robh+dt@...nel.org>
Cc: Ondrej Jirman <megous@...ous.com>, David Airlie <airlied@...ux.ie>,
Daniel Vetter <daniel@...ll.ch>,
Mark Rutland <mark.rutland@....com>,
Giuseppe Cavallaro <peppe.cavallaro@...com>,
Alexandre Torgue <alexandre.torgue@...com>,
Jose Abreu <joabreu@...opsys.com>,
"David S. Miller" <davem@...emloft.net>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
netdev@...r.kernel.org, linux-stm32@...md-mailman.stormreply.com
Subject: [PATCH v6 6/6] arm64: dts: allwinner: orange-pi-3: Enable HDMI output
From: Ondrej Jirman <megous@...ous.com>
Orange Pi 3 has a DDC_CEC_EN signal connected to PH2, that enables the DDC
I2C bus voltage shifter. Before EDID can be read, we need to pull PH2 high.
This is realized by the ddc-en-gpios property.
Signed-off-by: Ondrej Jirman <megous@...ous.com>
---
.../dts/allwinner/sun50i-h6-orangepi-3.dts | 26 +++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
index 2c6807b74ff6..01bb1bafe284 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
@@ -22,6 +22,18 @@
stdout-path = "serial0:115200n8";
};
+ connector {
+ compatible = "hdmi-connector";
+ ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
@@ -72,6 +84,10 @@
cpu-supply = <®_dcdca>;
};
+&de {
+ status = "okay";
+};
+
&ehci0 {
status = "okay";
};
@@ -91,6 +107,16 @@
status = "okay";
};
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&mdio {
ext_rgmii_phy: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
--
2.21.0
Powered by blists - more mailing lists