[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190527200627.8635-1-peron.clem@gmail.com>
Date: Mon, 27 May 2019 22:06:20 +0200
From: Clément Péron <peron.clem@...il.com>
To: Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Maxime Ripard <maxime.ripard@...tlin.com>,
Chen-Yu Tsai <wens@...e.org>, Jaroslav Kysela <perex@...ex.cz>,
Takashi Iwai <tiwai@...e.com>,
Jagan Teki <jagan@...rulasolutions.com>
Cc: alsa-devel@...a-project.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-sunxi@...glegroups.com,
Clément Péron <peron.clem@...il.com>
Subject: [PATCH v4 0/7] Allwinner H6 SPDIF support
*H6 DMA support IS REQUIRED*
Allwinner H6 SoC has a SPDIF controller called One Wire Audio (OWA) which
is different from the previous H3 generation and not compatible.
Difference are an increase of fifo sizes, some memory mapping are different
and there is now the possibility to output the master clock on a pin.
Actually all these features are unused and only a bit for flushing the TX
fifo is required.
Also this series requires the DMA working on H6, a first version has been
submitted by Jernej Škrabec[1] but has not been accepted yet.
[1] https://patchwork.kernel.org/project/linux-arm-kernel/list/?series=89011
Changes since v3:
- rename reg_fctl_ftx to val_fctl_ftx
- rebase this series on sound-next
- fix dt-bindings due to change in sound-next
- change node name sound_spdif to sound-spdif
Changes since v2:
- Split quirks and H6 support patch
- Add specific section for quirks comment
Changes since v1:
- Remove H3 compatible
- Add TX fifo bit flush quirks
- Add H6 bindings in SPDIF driver
Clément Péron (7):
dt-bindings: sound: sun4i-spdif: Add Allwinner H6 compatible
ASoC: sun4i-spdif: Move quirks to the top
ASoC: sun4i-spdif: Add TX fifo bit flush quirks
ASoC: sun4i-spdif: Add support for H6 SoC
arm64: dts: allwinner: Add SPDIF node for Allwinner H6
arm64: dts: allwinner: h6: Enable SPDIF for Beelink GS1
arm64: defconfig: Enable Sun4i SPDIF module
.../sound/allwinner,sun4i-a10-spdif.yaml | 1 +
.../dts/allwinner/sun50i-h6-beelink-gs1.dts | 4 ++
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 38 ++++++++++++++
arch/arm64/configs/defconfig | 1 +
sound/soc/sunxi/sun4i-spdif.c | 49 ++++++++++++++++---
5 files changed, 87 insertions(+), 6 deletions(-)
--
2.20.1
Powered by blists - more mailing lists