[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <VI1PR04MB5055647612FAC2FE6FBE139FEE1E0@VI1PR04MB5055.eurprd04.prod.outlook.com>
Date: Tue, 28 May 2019 19:24:04 +0000
From: Leonard Crestez <leonard.crestez@....com>
To: Anson Huang <anson.huang@....com>
CC: "robh+dt@...nel.org" <robh+dt@...nel.org>,
"mark.rutland@....com" <mark.rutland@....com>,
"shawnguo@...nel.org" <shawnguo@...nel.org>,
"s.hauer@...gutronix.de" <s.hauer@...gutronix.de>,
"kernel@...gutronix.de" <kernel@...gutronix.de>,
"festevam@...il.com" <festevam@...il.com>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
dl-linux-imx <linux-imx@....com>
Subject: Re: [PATCH RESEND 2/5] ARM: dts: imx7d-sdb: Assign corresponding
power supply for LDOs
On 12.05.2019 12:57, Anson Huang wrote:
> On i.MX7D SDB board, sw2 supplies 1p0d/1p2 LDO, this patch assigns
> corresponding power supply for 1p0d/1p2 LDO to avoid confusion by
> below log:
>
> vdd1p0d: supplied by regulator-dummy
> vdd1p2: supplied by regulator-dummy
>
> With this patch, the power supply is more accurate:
>
> vdd1p0d: supplied by SW2
> vdd1p2: supplied by SW2
>
> diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
>
> +®_1p0d {
> + vin-supply = <&sw2_reg>;
> +};
> +
> +®_1p2 {
> + vin-supply = <&sw2_reg>;
> +};
It's not clear why but this patch breaks imx7d-sdb boot. Checked two
boards: in a board farm and on my desk.
--
Regards,
Leonard
Powered by blists - more mailing lists