| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAPDyKFpWsScFY6oYqRmR=RUNnzeoCn1Vk7h-Nj3aisSOYh-a9w@mail.gmail.com>
Date: Tue, 28 May 2019 10:53:14 +0200
From: Ulf Hansson <ulf.hansson@...aro.org>
To: Neil Armstrong <narmstrong@...libre.com>
Cc: Kevin Hilman <khilman@...libre.com>,
"linux-mmc@...r.kernel.org" <linux-mmc@...r.kernel.org>,
"open list:ARM/Amlogic Meson..." <linux-amlogic@...ts.infradead.org>,
Linux ARM <linux-arm-kernel@...ts.infradead.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Guillaume La Roque <glaroque@...libre.com>
Subject: Re: [PATCH v2 2/3] mmc: meson-gx: add dram-access-quirk
On Mon, 27 May 2019 at 14:43, Neil Armstrong <narmstrong@...libre.com> wrote:
>
> On the Amlogic G12A SoC family, (only) the SDIO controller fails to access
> the data from DRAM, leading to a broken controller.
>
> But each MMC controller has 1,5KiB of SRAM after the registers, that can
> be used as bounce buffer to avoid direct DRAM access from the integrated
> DMAs (this SRAM may be used by the boot ROM when DRAM is not yet initialized).
>
> The quirk is to disable the chained descriptor for this controller, and
> use this SRAM memory zone as buffer for the bounce buffer fallback mode.
>
> The performance hit hasn't been evaluated, but the fix has been tested
> using a WiFi AP6398S SDIO module, and the iperf3 Bandwidth measurement gave
> 55.2 Mbits/sec over a 63 Hours long test, with the SDIO ios set as High-Speed
> at 50MHz clock. It gave 170 Mbits/sec as SDR104 and 200MHz clock.
>
> Reviewed-by: Kevin Hilman <khilman@...libre.com>
> Tested-by: Guillaume La Roque <glaroque@...libre.com>
> Signed-off-by: Neil Armstrong <narmstrong@...libre.com>
Applied for next, thanks!
Kind regards
Uffe
> ---
> drivers/mmc/host/meson-gx-mmc.c | 70 ++++++++++++++++++++++++++-------
> 1 file changed, 55 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
> index c5a8af4ca76b..bcf1789d26b6 100644
> --- a/drivers/mmc/host/meson-gx-mmc.c
> +++ b/drivers/mmc/host/meson-gx-mmc.c
> @@ -129,6 +129,9 @@
> #define SD_EMMC_TXD 0x94
> #define SD_EMMC_LAST_REG SD_EMMC_TXD
>
> +#define SD_EMMC_SRAM_DATA_BUF_LEN 1536
> +#define SD_EMMC_SRAM_DATA_BUF_OFF 0x200
> +
> #define SD_EMMC_CFG_BLK_SIZE 512 /* internal buffer max: 512 bytes */
> #define SD_EMMC_CFG_RESP_TIMEOUT 256 /* in clock cycles */
> #define SD_EMMC_CMD_TIMEOUT 1024 /* in ms */
> @@ -168,6 +171,8 @@ struct meson_host {
> unsigned long req_rate;
> bool ddr;
>
> + bool dram_access_quirk;
> +
> struct pinctrl *pinctrl;
> struct pinctrl_state *pins_default;
> struct pinctrl_state *pins_clk_gate;
> @@ -232,11 +237,20 @@ static struct mmc_command *meson_mmc_get_next_command(struct mmc_command *cmd)
> static void meson_mmc_get_transfer_mode(struct mmc_host *mmc,
> struct mmc_request *mrq)
> {
> + struct meson_host *host = mmc_priv(mmc);
> struct mmc_data *data = mrq->data;
> struct scatterlist *sg;
> int i;
> bool use_desc_chain_mode = true;
>
> + /*
> + * When Controller DMA cannot directly access DDR memory, disable
> + * support for Chain Mode to directly use the internal SRAM using
> + * the bounce buffer mode.
> + */
> + if (host->dram_access_quirk)
> + return;
> +
> /*
> * Broken SDIO with AP6255-based WiFi on Khadas VIM Pro has been
> * reported. For some strange reason this occurs in descriptor
> @@ -1049,6 +1063,10 @@ static int meson_mmc_probe(struct platform_device *pdev)
> host->dev = &pdev->dev;
> dev_set_drvdata(&pdev->dev, host);
>
> + /* The G12A SDIO Controller needs an SRAM bounce buffer */
> + host->dram_access_quirk = device_property_read_bool(&pdev->dev,
> + "amlogic,dram-access-quirk");
> +
> /* Get regulators and the supported OCR mask */
> host->vqmmc_enabled = false;
> ret = mmc_regulator_get_supply(mmc);
> @@ -1146,9 +1164,16 @@ static int meson_mmc_probe(struct platform_device *pdev)
> goto err_init_clk;
>
> mmc->caps |= MMC_CAP_CMD23;
> - mmc->max_blk_count = CMD_CFG_LENGTH_MASK;
> + if (host->dram_access_quirk) {
> + /* Limit to the available sram memory */
> + mmc->max_segs = SD_EMMC_SRAM_DATA_BUF_LEN / mmc->max_blk_size;
> + mmc->max_blk_count = mmc->max_segs;
> + } else {
> + mmc->max_blk_count = CMD_CFG_LENGTH_MASK;
> + mmc->max_segs = SD_EMMC_DESC_BUF_LEN /
> + sizeof(struct sd_emmc_desc);
> + }
> mmc->max_req_size = mmc->max_blk_count * mmc->max_blk_size;
> - mmc->max_segs = SD_EMMC_DESC_BUF_LEN / sizeof(struct sd_emmc_desc);
> mmc->max_seg_size = mmc->max_req_size;
>
> /*
> @@ -1158,15 +1183,27 @@ static int meson_mmc_probe(struct platform_device *pdev)
> */
> mmc->caps2 &= ~MMC_CAP2_HS400;
>
> - /* data bounce buffer */
> - host->bounce_buf_size = mmc->max_req_size;
> - host->bounce_buf =
> - dma_alloc_coherent(host->dev, host->bounce_buf_size,
> - &host->bounce_dma_addr, GFP_KERNEL);
> - if (host->bounce_buf == NULL) {
> - dev_err(host->dev, "Unable to map allocate DMA bounce buffer.\n");
> - ret = -ENOMEM;
> - goto err_free_irq;
> + if (host->dram_access_quirk) {
> + /*
> + * The MMC Controller embeds 1,5KiB of internal SRAM
> + * that can be used to be used as bounce buffer.
> + * In the case of the G12A SDIO controller, use these
> + * instead of the DDR memory
> + */
> + host->bounce_buf_size = SD_EMMC_SRAM_DATA_BUF_LEN;
> + host->bounce_buf = host->regs + SD_EMMC_SRAM_DATA_BUF_OFF;
> + host->bounce_dma_addr = res->start + SD_EMMC_SRAM_DATA_BUF_OFF;
> + } else {
> + /* data bounce buffer */
> + host->bounce_buf_size = mmc->max_req_size;
> + host->bounce_buf =
> + dma_alloc_coherent(host->dev, host->bounce_buf_size,
> + &host->bounce_dma_addr, GFP_KERNEL);
> + if (host->bounce_buf == NULL) {
> + dev_err(host->dev, "Unable to map allocate DMA bounce buffer.\n");
> + ret = -ENOMEM;
> + goto err_free_irq;
> + }
> }
>
> host->descs = dma_alloc_coherent(host->dev, SD_EMMC_DESC_BUF_LEN,
> @@ -1183,8 +1220,9 @@ static int meson_mmc_probe(struct platform_device *pdev)
> return 0;
>
> err_bounce_buf:
> - dma_free_coherent(host->dev, host->bounce_buf_size,
> - host->bounce_buf, host->bounce_dma_addr);
> + if (!host->dram_access_quirk)
> + dma_free_coherent(host->dev, host->bounce_buf_size,
> + host->bounce_buf, host->bounce_dma_addr);
> err_free_irq:
> free_irq(host->irq, host);
> err_init_clk:
> @@ -1208,8 +1246,10 @@ static int meson_mmc_remove(struct platform_device *pdev)
>
> dma_free_coherent(host->dev, SD_EMMC_DESC_BUF_LEN,
> host->descs, host->descs_dma_addr);
> - dma_free_coherent(host->dev, host->bounce_buf_size,
> - host->bounce_buf, host->bounce_dma_addr);
> +
> + if (!host->dram_access_quirk)
> + dma_free_coherent(host->dev, host->bounce_buf_size,
> + host->bounce_buf, host->bounce_dma_addr);
>
> clk_disable_unprepare(host->mmc_clk);
> clk_disable_unprepare(host->core_clk);
> --
> 2.21.0
>
Powered by blists - more mailing lists