| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <5e074715-fd8c-908a-b880-9f1fd03a244f@gmail.com>
Date: Thu, 30 May 2019 00:25:41 +0300
From: Dmitry Osipenko <digetx@...il.com>
To: Sowjanya Komatineni <skomatineni@...dia.com>,
thierry.reding@...il.com, jonathanh@...dia.com, tglx@...utronix.de,
jason@...edaemon.net, marc.zyngier@....com,
linus.walleij@...aro.org, stefan@...er.ch, mark.rutland@....com
Cc: pdeschrijver@...dia.com, pgaikwad@...dia.com, sboyd@...nel.org,
linux-clk@...r.kernel.org, linux-gpio@...r.kernel.org,
jckuo@...dia.com, josephl@...dia.com, talho@...dia.com,
linux-tegra@...r.kernel.org, linux-kernel@...r.kernel.org,
mperttunen@...dia.com, spatra@...dia.com, robh+dt@...nel.org,
devicetree@...r.kernel.org
Subject: Re: [PATCH V2 02/12] pinctrl: tegra: add suspend and resume support
29.05.2019 23:56, Sowjanya Komatineni пишет:
>
> On 5/29/19 1:47 PM, Dmitry Osipenko wrote:
>> 29.05.2019 23:11, Sowjanya Komatineni пишет:
>>> On 5/29/19 12:32 PM, Dmitry Osipenko wrote:
>>>> 29.05.2019 21:14, Sowjanya Komatineni пишет:
>>>>> On 5/29/19 8:29 AM, Dmitry Osipenko wrote:
>>>>>> 29.05.2019 2:08, Sowjanya Komatineni пишет:
>>>>>>> This patch adds suspend and resume support for Tegra pinctrl driver
>>>>>>> and registers them to syscore so the pinmux settings are restored
>>>>>>> before the devices resume.
>>>>>>>
>>>>>>> Signed-off-by: Sowjanya Komatineni <skomatineni@...dia.com>
>>>>>>> ---
>>>>>>> drivers/pinctrl/tegra/pinctrl-tegra.c | 68
>>>>>>> +++++++++++++++++++++++++++++++-
>>>>>>> drivers/pinctrl/tegra/pinctrl-tegra.h | 3 ++
>>>>>>> drivers/pinctrl/tegra/pinctrl-tegra114.c | 1 +
>>>>>>> drivers/pinctrl/tegra/pinctrl-tegra124.c | 1 +
>>>>>>> drivers/pinctrl/tegra/pinctrl-tegra20.c | 1 +
>>>>>>> drivers/pinctrl/tegra/pinctrl-tegra210.c | 1 +
>>>>>>> drivers/pinctrl/tegra/pinctrl-tegra30.c | 1 +
>>>>>>> 7 files changed, 75 insertions(+), 1 deletion(-)
>>>>>>>
>>>>>>> diff --git a/drivers/pinctrl/tegra/pinctrl-tegra.c
>>>>>>> b/drivers/pinctrl/tegra/pinctrl-tegra.c
>>>>>>> index a5008c066bac..bdc47e62c457 100644
>>>>>>> --- a/drivers/pinctrl/tegra/pinctrl-tegra.c
>>>>>>> +++ b/drivers/pinctrl/tegra/pinctrl-tegra.c
>>>>>>> @@ -28,11 +28,18 @@
>>>>>>> #include <linux/pinctrl/pinmux.h>
>>>>>>> #include <linux/pinctrl/pinconf.h>
>>>>>>> #include <linux/slab.h>
>>>>>>> +#include <linux/syscore_ops.h>
>>>>>>> #include "../core.h"
>>>>>>> #include "../pinctrl-utils.h"
>>>>>>> #include "pinctrl-tegra.h"
>>>>>>> +#define EMMC2_PAD_CFGPADCTRL_0 0x1c8
>>>>>>> +#define EMMC4_PAD_CFGPADCTRL_0 0x1e0
>>>>>>> +#define EMMC_DPD_PARKING (0x1fff << 14)
>>>>>>> +
>>>>>>> +static struct tegra_pmx *pmx;
>>>>>>> +
>>>>>>> static inline u32 pmx_readl(struct tegra_pmx *pmx, u32 bank, u32
>>>>>>> reg)
>>>>>>> {
>>>>>>> return readl(pmx->regs[bank] + reg);
>>>>>>> @@ -629,6 +636,50 @@ static void
>>>>>>> tegra_pinctrl_clear_parked_bits(struct tegra_pmx *pmx)
>>>>>>> }
>>>>>>> }
>>>>>>> +static int __maybe_unused tegra_pinctrl_suspend(void)
>>>>>>> +{
>>>>>>> + u32 *backup_regs = pmx->backup_regs;
>>>>>>> + u32 *regs;
>>>>>>> + int i, j;
>>>>>>> +
>>>>>>> + for (i = 0; i < pmx->nbanks; i++) {
>>>>>>> + regs = pmx->regs[i];
>>>>>>> + for (j = 0; j < pmx->reg_bank_size[i] / 4; j++)
>>>>>>> + *backup_regs++ = readl(regs++);
>>>>>>> + }
>>>>>>> +
>>>>>>> + return pinctrl_force_sleep(pmx->pctl);
>>>>>>> +}
>>>>>>> +
>>>>>>> +static void __maybe_unused tegra_pinctrl_resume(void)
>>>>>>> +{
>>>>>>> + u32 *backup_regs = pmx->backup_regs;
>>>>>>> + u32 *regs;
>>>>>>> + u32 val;
>>>>>>> + int i, j;
>>>>>>> +
>>>>>>> + for (i = 0; i < pmx->nbanks; i++) {
>>>>>>> + regs = pmx->regs[i];
>>>>>>> + for (j = 0; j < pmx->reg_bank_size[i] / 4; j++)
>>>>>>> + writel(*backup_regs++, regs++);
>>>>>>> + }
>>>>>>> +
>>>>>>> + if (pmx->soc->has_park_padcfg) {
>>>>>>> + val = pmx_readl(pmx, 0, EMMC2_PAD_CFGPADCTRL_0);
>>>>>>> + val &= ~EMMC_DPD_PARKING;
>>>>>>> + pmx_writel(pmx, val, 0, EMMC2_PAD_CFGPADCTRL_0);
>>>>>>> +
>>>>>>> + val = pmx_readl(pmx, 0, EMMC4_PAD_CFGPADCTRL_0);
>>>>>>> + val &= ~EMMC_DPD_PARKING;
>>>>>>> + pmx_writel(pmx, val, 0, EMMC4_PAD_CFGPADCTRL_0);
>>>>>>> + }
>>>>>>> +}
>>>>>>>
>>>>>> But the CFGPADCTRL registers are already programmed by restoring the
>>>>>> backup_regs and hence the relevant EMMC's are already unparked. Hence
>>>>>> why do you need to force-unpark both of the EMMC's? What if EMMC is
>>>>>> unpopulated on a board, why do you need to unpark it then?
>>>>> PARK bit for EMMC2/EMMC4 (EMMC2_PAD_CFGPADCTRL and
>>>>> EMMC4_PAD_CFGPADCTRL)
>>>>> are not part of pinmux.
>>>>>
>>>>> They are part of CFGPADCTRL register so pinctrl driver pingroup
>>>>> doesn't
>>>>> include these registers.
>>>> I'm looking at the tegra210_groups and it clearly has these both
>>>> registers as a part of pinctrl setup because the rest of the bits
>>>> configure drive of the pads.
>>>>
>>>> From pinctrl-tegra210.c:
>>>>
>>>> #define DRV_PINGROUP_REG_A 0x8d4 /* bank 0 */
>>>>
>>>> DRV_PINGROUP(sdmmc2, 0xa9c, 2, 6, 8, 6, 28, 2, 30, 2),
>>>> DRV_PINGROUP(sdmmc4, 0xab4, 2, 6, 8, 6, 28, 2, 30, 2),
>>>>
>>>> ...
>>>>
>>>> 0xa9c - 0x8d4 = 0x1c8
>>>> 0xab4 - 0x8d4 = 0x1e0
>>>>
>>>> Hence the PARK bits are already getting unset by restoring the
>>>> backup_regs because the CFGPADCTRL registers are a part of the "bank 0"
>>>> registers.
>>>>
>>>> Am I still missing something?
>>> DRV_PINGROUP parked_bit is -1 and will not be programmed so store and
>>> restore will not take care of it.
>>>
>>> Also EMMC PADCFG is the only padcfg register which has parked bit and
>>> for other IO pads its part of pinmux
>> You're storing raw values of all of the PINCTRL registers and then
>> restoring the raw values (if I'm not misreading that part on the patch),
>> it's absolutely meaningless that DRV_PINGROUP doesn't define the PARK
>> bits.
>>
>> In a result, the backup_regs array contains raw CFGPADCTRL value with
>> the PARK bits being unset on store, that value is written out on the
>> restore as-is and hence the PARK bits are getting unset as well.
>>
>> And why DRV_PINGROUP misses PARK bits for the EMMC's? Looks like a
>> driver's drawback that need to be addressed.
>
> Parked bits from padcfg are available only for couple of EMMC registers.
>
> default PARK bits are set so stored value contains park bit set. on
> resume, after restoring park bit is cleared.
TRM says that the PARK bits are set on HW reset (and on DPD IIUC) and
then SW should unset the bits. I assume that the PARK bits of the EMMC
pads are unset by bootloader and that's why it doesn't cause problems
for kernel, in oppose to PARK bits of the rest of pinmux that are unset
by the driver in tegra_pinctrl_clear_parked_bits() on driver's probe.
> on subsequence DPD entry, stored value contains park bit 0 and HW clamps
> park bit to logic 1 during DPD entry and cleared again on resume.
I assume that EMMC won't work properly if pads are "parked" and the PARK
bits should be in unset state on kernel boot-up as I wrote above, hence
stored value should always contain 0 for the EMMC PARK bits. No?
Powered by blists - more mailing lists