linux-kernel - [PATCH v6 00/10] add USB Type-B GPIO connector driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1559115828-19146-1-git-send-email-chunfeng.yun@mediatek.com>
Date:   Wed, 29 May 2019 15:43:38 +0800
From:   Chunfeng Yun <chunfeng.yun@...iatek.com>
To:     Rob Herring <robh+dt@...nel.org>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Heikki Krogerus <heikki.krogerus@...ux.intel.com>
CC:     Mark Rutland <mark.rutland@....com>,
        Chunfeng Yun <chunfeng.yun@...iatek.com>,
        Matthias Brugger <matthias.bgg@...il.com>,
        Adam Thomson <Adam.Thomson.Opensource@...semi.com>,
        Li Jun <jun.li@....com>,
        Badhri Jagan Sridharan <badhri@...gle.com>,
        Hans de Goede <hdegoede@...hat.com>,
        Andy Shevchenko <andy.shevchenko@...il.com>,
        Min Guo <min.guo@...iatek.com>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>, <linux-usb@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-mediatek@...ts.infradead.org>,
        Biju Das <biju.das@...renesas.com>,
        Linus Walleij <linus.walleij@...aro.org>,
        Yu Chen <chenyu56@...wei.com>
Subject: [PATCH v6 00/10] add USB Type-B GPIO connector driver

Because the USB Connector is introduced and the requirement of
usb-connector.txt binding, the old way using extcon to support
USB Dual-Role switch is now deprecated, meanwhile there is no
available common driver when use Type-B connector, typically
using an input GPIO to detect USB ID pin.
This patch series introduce a Type-B GPIO connector driver and try
to replace the function provided by extcon-usb-gpio driver.

v6 changes:
  1. merge [1] and [2] into this series
  2. don't use graph anymore to find usb-role-switch
  3. abandon [3] and introduce three patches (6, 7, 8 in this series)
     to rebuild APIs getting usb-role-switch

  [1]: [v3] dt-binding: usb: add usb-role-switch property
       https://patchwork.kernel.org/patch/10934835/
  [2]: [v6,08/13] usb: roles: Introduce stubs for the exiting functions in role.h
       https://patchwork.kernel.org/patch/10909971/

  [3]: [PATCH v5 4/6] usb: roles: add API to get usb_role_switch by node

v5 changes:
  1. remove linux/of.h and put usb_role_switch when error happens,
     suggested by Biju
  2. treat Type-B connector as USB controller's child, but not as
     a virtual device, suggested by Rob
  3. provide and use generic property "usb-role-switch", see [1],
     suggested by Rob

  Note: this series still depends on [2]

  [1]: [v3] dt-binding: usb: add usb-role-switch property
       https://patchwork.kernel.org/patch/10934835/
  [2]: [v6,08/13] usb: roles: Introduce stubs for the exiting functions in role.h
       https://patchwork.kernel.org/patch/10909971/

v4 changes:
  1. use switch_fwnode_match() to find fwnode suggested by Heikki
  2. assign fwnode member of usb_role_switch struct suggested by Heikki
  3. make [4/6] depend on [2]
  3. remove linux/gpio.h suggested by Linus
  4. put node when error happens

  [4/6] usb: roles: add API to get usb_role_switch by node
  [2] [v6,08/13] usb: roles: Introduce stubs for the exiting functions in role.h
    https://patchwork.kernel.org/patch/10909971/

v3 changes:
  1. add GPIO direction, and use fixed-regulator for GPIO controlled
    VBUS regulator suggested by Rob;
  2. rebuild fwnode_usb_role_switch_get() suggested by Andy and Heikki
  3. treat the type-B connector as a virtual device;
  4. change file name of driver again
  5. select USB_ROLE_SWITCH in mtu3/Kconfig suggested by Heikki
  6. rename ssusb_mode_manual_switch() to ssusb_mode_switch()

v2 changes:
 1. make binding clear, and add a extra compatible suggested by Hans

Chunfeng Yun (7):
  dt-binding: usb: add usb-role-switch property
  dt-bindings: connector: add optional properties for Type-B
  dt-bindings: usb: add binding for Type-B GPIO connector driver
  dt-bindings: usb: mtu3: add properties about USB Role Switch
  usb: roles: get usb-role-switch from parent
  usb: roles: add USB Type-B GPIO connector driver
  usb: mtu3: register a USB Role Switch for dual role mode

Heikki Krogerus (2):
  device connection: Add fwnode_connection_find_match()
  usb: roles: Add fwnode_usb_role_switch_get() function

Yu Chen (1):
  usb: roles: Introduce stubs for the exiting functions in role.h.

 .../bindings/connector/usb-connector.txt      |  14 +
 .../devicetree/bindings/usb/generic.txt       |   4 +
 .../devicetree/bindings/usb/mediatek,mtu3.txt |  10 +
 .../bindings/usb/typeb-conn-gpio.txt          |  30 ++
 drivers/base/devcon.c                         |  33 +-
 drivers/usb/mtu3/Kconfig                      |   1 +
 drivers/usb/mtu3/mtu3.h                       |   5 +
 drivers/usb/mtu3/mtu3_debugfs.c               |   4 +-
 drivers/usb/mtu3/mtu3_dr.c                    |  48 ++-
 drivers/usb/mtu3/mtu3_dr.h                    |   6 +-
 drivers/usb/mtu3/mtu3_plat.c                  |   3 +-
 drivers/usb/roles/Kconfig                     |  11 +
 drivers/usb/roles/Makefile                    |   1 +
 drivers/usb/roles/class.c                     |  41 ++-
 drivers/usb/roles/typeb-conn-gpio.c           | 286 ++++++++++++++++++
 include/linux/device.h                        |  10 +-
 include/linux/usb/role.h                      |  37 +++
 17 files changed, 524 insertions(+), 20 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/usb/typeb-conn-gpio.txt
 create mode 100644 drivers/usb/roles/typeb-conn-gpio.c

-- 
2.21.0