[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190529105615.14027-8-jagan@amarulasolutions.com>
Date: Wed, 29 May 2019 16:26:13 +0530
From: Jagan Teki <jagan@...rulasolutions.com>
To: Maxime Ripard <maxime.ripard@...tlin.com>,
David Airlie <airlied@...ux.ie>,
Daniel Vetter <daniel@...ll.ch>, Chen-Yu Tsai <wens@...e.org>,
dri-devel@...ts.freedesktop.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Cc: Michael Trimarchi <michael@...rulasolutions.com>,
devicetree@...r.kernel.org, linux-sunxi@...glegroups.com,
linux-amarula@...rulasolutions.com,
Sergey Suloev <ssuloev@...altech.com>,
Ryan Pannell <ryan@...kl.com>, bshah@...olab.com,
Jagan Teki <jagan@...rulasolutions.com>
Subject: [DO NOT MERGE] [PATCH v9 7/9] arm64: dts: allwinner: bananapi-m64: Enable Bananapi S070WV20-CT16 DSI panel
This patch add support for Bananapi S070WV20-CT16 DSI panel to
BPI-M64 board.
DSI panel connected via board DSI port with,
- DLDO1 as VCC-DSI supply
- DCDC1 as VDD supply
- PD7 gpio for lcd enable pin
- PD6 gpio for lcd reset pin
- PD5 gpio for backlight enable pin
Signed-off-by: Jagan Teki <jagan@...rulasolutions.com>
---
.../dts/allwinner/sun50i-a64-bananapi-m64.dts | 31 +++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
index c2a6b73b17cf..166b9761ca83 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
@@ -45,6 +45,7 @@
#include "sun50i-a64.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
/ {
model = "BananaPi-M64";
@@ -56,6 +57,14 @@
serial1 = &uart1;
};
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&r_pwm 0 50000 PWM_POLARITY_INVERTED>;
+ brightness-levels = <1 2 4 8 16 32 64 128 255>;
+ default-brightness-level = <2>;
+ enable-gpios = <&pio 3 5 GPIO_ACTIVE_HIGH>; /* LCD-BL-EN: PD5 */
+ };
+
chosen {
stdout-path = "serial0:115200n8";
};
@@ -116,6 +125,24 @@
status = "okay";
};
+&dphy {
+ status = "okay";
+};
+
+&dsi {
+ vcc-dsi-supply = <®_dldo1>; /* VCC3V3-DSI */
+ status = "okay";
+
+ panel@0 {
+ compatible = "bananapi,s070wv20-ct16-icn6211";
+ reg = <0>;
+ enable-gpios = <&pio 3 7 GPIO_ACTIVE_HIGH>; /* LCD-PWR-EN: PD7 */
+ reset-gpios = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD6 */
+ vdd-supply = <®_dcdc1>;
+ backlight = <&backlight>;
+ };
+};
+
&ehci0 {
status = "okay";
};
@@ -206,6 +233,10 @@
status = "okay";
};
+&r_pwm {
+ status = "okay";
+};
+
&r_rsb {
status = "okay";
--
2.18.0.321.gffc6fa0e3
Powered by blists - more mailing lists