lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Thu, 30 May 2019 08:47:27 -0500
From:   Bjorn Helgaas <helgaas@...nel.org>
To:     Alex Williamson <alex.williamson@...hat.com>
Cc:     linux-pci@...r.kernel.org, linux-kernel@...r.kernel.org,
        myron.stowe@...hat.com, bodong@...lanox.com, eli@...lanox.com,
        laine@...hat.com
Subject: Re: [PATCH] PCI: Return error if cannot probe VF

On Wed, May 01, 2019 at 11:00:16AM -0600, Alex Williamson wrote:
> Commit 0e7df22401a3 ("PCI: Add sysfs sriov_drivers_autoprobe to control
> VF driver binding") allows the user to specify that drivers for VFs of
> a PF should not be probed, but it actually causes pci_device_probe() to
> return success back to the driver core in this case.  Therefore by all
> sysfs appearances the device is bound to a driver, the driver link from
> the device exists as does the device link back from the driver, yet the
> driver's probe function is never called on the device.  We also fail to
> do any sort of cleanup when we're prohibited from probing the device,
> the irq setup remains in place and we even hold a device reference.
> 
> Instead, abort with errno before any setup or references are taken when
> pci_device_can_probe() prevents us from trying to probe the device.
> 
> Fixes: 0e7df22401a3 ("PCI: Add sysfs sriov_drivers_autoprobe to control VF driver binding")
> Signed-off-by: Alex Williamson <alex.williamson@...hat.com>

Applied to pci/enumeration for v5.3, thanks!

The scenario you describe, Laine, indeed sounds cumbersome.  If you
want to propose an alternate or additional patch to address that, or
if you think Alex's patch will make it harder to clean up that
scenario, I'm all ears.  But it seems like Alex's patch is an
improvement even if it leaves some problems unsolved.

> ---
> 
> This issue is easily tested by disabling sriov_drivers_autoprobe and
> creating VFs:
> 
> # echo 0 > sriov_drivers_autoprobe
> # echo 3 > sriov_numvfs
> # readlink -f virtfn*/driver
> /sys/bus/pci/drivers/iavf
> /sys/bus/pci/drivers/iavf
> /sys/bus/pci/drivers/iavf
> (yet no netdevs exist for these VFs)
> 
> The semantics of this autoprobe disabling are a bit strange for the
> user as well, I suppose it works if we force a bind through a driver's
> bind attribute, but tools like libvirt and driverctl expect to bind
> devices by setting the driver_override and then pushing the device
> through driver_probe on the bus.  Is the intention of disabling
> "autoprobe" that a driver_override should still work?  Otherwise the
> user needs to set the driver_override for each VF, re-enable
> sriov_drivers_autoprobe on the PF, and then probe the VFs.  Thus maybe
> pci_device_can_probe() should allow probes of the driver_override
> driver?  Thanks,
> 
> Alex
> 
>  drivers/pci/pci-driver.c |   13 +++++++------
>  1 file changed, 7 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
> index 71853befd435..da7b82e56c83 100644
> --- a/drivers/pci/pci-driver.c
> +++ b/drivers/pci/pci-driver.c
> @@ -414,6 +414,9 @@ static int pci_device_probe(struct device *dev)
>  	struct pci_dev *pci_dev = to_pci_dev(dev);
>  	struct pci_driver *drv = to_pci_driver(dev->driver);
>  
> +	if (!pci_device_can_probe(pci_dev))
> +		return -ENODEV;
> +
>  	pci_assign_irq(pci_dev);
>  
>  	error = pcibios_alloc_irq(pci_dev);
> @@ -421,12 +424,10 @@ static int pci_device_probe(struct device *dev)
>  		return error;
>  
>  	pci_dev_get(pci_dev);
> -	if (pci_device_can_probe(pci_dev)) {
> -		error = __pci_device_probe(drv, pci_dev);
> -		if (error) {
> -			pcibios_free_irq(pci_dev);
> -			pci_dev_put(pci_dev);
> -		}
> +	error = __pci_device_probe(drv, pci_dev);
> +	if (error) {
> +		pcibios_free_irq(pci_dev);
> +		pci_dev_put(pci_dev);
>  	}
>  
>  	return error;
> 

Powered by blists - more mailing lists