| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <e72ae680-e8b7-455a-fdde-af79d429dd8c@roeck-us.net>
Date: Wed, 29 May 2019 18:00:28 -0700
From: Guenter Roeck <linux@...ck-us.net>
To: Vijay Khemka <vijaykhemka@...com>,
Jean Delvare <jdelvare@...e.com>,
Jonathan Corbet <corbet@....net>, linux-hwmon@...r.kernel.org,
linux-doc@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: joel@....id.au, linux-aspeed@...ts.ozlabs.org, sdasari@...com,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Subject: Re: [PATCH 1/2] hwmon: pmbus: Add Infineon PXE1610 VR driver
On 5/29/19 3:35 PM, Vijay Khemka wrote:
> Added pmbus driver for the new device Infineon pxe1610
> voltage regulator. It also supports similar family device
> PXE1110 and PXM1310.
>
> Signed-off-by: Vijay Khemka <vijaykhemka@...com>
> ---
> drivers/hwmon/pmbus/Kconfig | 9 +++
> drivers/hwmon/pmbus/Makefile | 1 +
> drivers/hwmon/pmbus/pxe1610.c | 119 ++++++++++++++++++++++++++++++++++
> 3 files changed, 129 insertions(+)
> create mode 100644 drivers/hwmon/pmbus/pxe1610.c
>
> diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
> index 30751eb9550a..338ef9b5a395 100644
> --- a/drivers/hwmon/pmbus/Kconfig
> +++ b/drivers/hwmon/pmbus/Kconfig
> @@ -154,6 +154,15 @@ config SENSORS_MAX8688
> This driver can also be built as a module. If so, the module will
> be called max8688.
>
> +config SENSORS_PXE1610
> + tristate "Infineon PXE1610"
> + help
> + If you say yes here you get hardware monitoring support for Infineon
> + PXE1610.
> +
> + This driver can also be built as a module. If so, the module will
> + be called pxe1610.
> +
> config SENSORS_TPS40422
> tristate "TI TPS40422"
> help
> diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
> index 2219b9300316..b0fbd017a91a 100644
> --- a/drivers/hwmon/pmbus/Makefile
> +++ b/drivers/hwmon/pmbus/Makefile
> @@ -18,6 +18,7 @@ obj-$(CONFIG_SENSORS_MAX20751) += max20751.o
> obj-$(CONFIG_SENSORS_MAX31785) += max31785.o
> obj-$(CONFIG_SENSORS_MAX34440) += max34440.o
> obj-$(CONFIG_SENSORS_MAX8688) += max8688.o
> +obj-$(CONFIG_SENSORS_PXE1610) += pxe1610.o
> obj-$(CONFIG_SENSORS_TPS40422) += tps40422.o
> obj-$(CONFIG_SENSORS_TPS53679) += tps53679.o
> obj-$(CONFIG_SENSORS_UCD9000) += ucd9000.o
> diff --git a/drivers/hwmon/pmbus/pxe1610.c b/drivers/hwmon/pmbus/pxe1610.c
> new file mode 100644
> index 000000000000..01e267944df5
> --- /dev/null
> +++ b/drivers/hwmon/pmbus/pxe1610.c
> @@ -0,0 +1,119 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Hardware monitoring driver for Infineon PXE1610
> + *
> + * Copyright (c) 2019 Facebook Inc
> + *
> + */
> +
> +#include <linux/err.h>
> +#include <linux/i2c.h>
> +#include <linux/init.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include "pmbus.h"
> +
> +/*
> + * Identify chip parameters.
> + */
> +static int pxe1610_identify(struct i2c_client *client,
> + struct pmbus_driver_info *info)
Please align continuation lines with '('.
> +{
> + if (pmbus_check_byte_register(client, 0, PMBUS_VOUT_MODE)) {
> + int vout_mode;
> +
> + vout_mode = pmbus_read_byte_data(client, 0, PMBUS_VOUT_MODE);
pmbus_read_byte_data() can return an error. Calling pmbus_check_byte_register()
doesn't really add any value here, since the second call can still fail,
which needs to be checked.
> + switch (vout_mode & 0x1f) {
> + case 1:
> + info->vrm_version = vr12;
> + break;
Alignment is off.
> + case 2:
> + info->vrm_version = vr13;
> + break;
Same here.
> + default:
> + return -ENODEV;
> + }
> + }
> + return 0;
> +}
> +
> +static int pxe1610_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct pmbus_driver_info *info;
> + u8 buf[I2C_SMBUS_BLOCK_MAX];
> + int ret;
> +
> + if (!i2c_check_functionality(client->adapter,
> + I2C_FUNC_SMBUS_READ_BYTE_DATA
> + | I2C_FUNC_SMBUS_READ_WORD_DATA
> + | I2C_FUNC_SMBUS_READ_BLOCK_DATA))
> + return -ENODEV;
> +
> + /* By default this device doesn't boot to page 0, so set page 0
> + * to access all pmbus registers.
> + */
Please use standard multi-line comments.
> + i2c_smbus_write_byte_data(client, 0, 0);
> +
Please use the PMBUS_PAGE command definition.
I wonder if it would make sense to initialize currpage in the core to an unreasonable
number for multi-page chips, but I guess that is a different question.
> + /* Read Manufacturer id */
> + ret = i2c_smbus_read_block_data(client, PMBUS_MFR_ID, buf);
> + if (ret < 0) {
> + dev_err(&client->dev, "Failed to read PMBUS_MFR_ID\n");
> + return ret;
> + }
> + if (ret != 2 || strncmp(buf, "XP", strlen("XP"))) {
The strlen() is really unnecessary here. Just use 2 (and a define
for it if you like).
> + dev_err(&client->dev, "MFR_ID unrecognised\n");
unrecognized. Oh well, turns out unrecognised is the British spelling and
just as valid, so feel free to keep it if you like.
> + return -ENODEV;
> + }
> +
> + info = devm_kzalloc(&client->dev, sizeof(struct pmbus_driver_info),
> + GFP_KERNEL);
> + if (!info)
> + return -ENOMEM;
> +
> + info->format[PSC_VOLTAGE_IN] = linear;
> + info->format[PSC_VOLTAGE_OUT] = vid;
> + info->format[PSC_CURRENT_IN] = linear;
> + info->format[PSC_CURRENT_OUT] = linear;
> + info->format[PSC_POWER] = linear;
> + info->format[PSC_TEMPERATURE] = linear;
> +
> + info->func[0] = PMBUS_HAVE_VIN
> + | PMBUS_HAVE_VOUT | PMBUS_HAVE_IIN
> + | PMBUS_HAVE_IOUT | PMBUS_HAVE_PIN
> + | PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP
> + | PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT
> + | PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_STATUS_TEMP;
> + info->func[1] = info->func[0];
> + info->func[2] = info->func[0];
> +
> + info->pages = id->driver_data;
> + info->identify = pxe1610_identify;
> +
It doesn't really add value to initialize all these parameters manually.
I would suggest to use the approach from tps53679.c, ie have a static
structure and use devm_kmemdup() to pass a copy to pmbus_do_probe().
> + return pmbus_do_probe(client, id, info);
> +}
> +
> +static const struct i2c_device_id pxe1610_id[] = {
> + {"pxe1610", 3},
> + {"pxe1110", 3},
> + {"pxm1310", 3},
Unless there are chips with different page counts in the queue, using
driver_data to pass the number of pages does not add any value. Just
set num_pages to 3.
If you like, feel free to use a define instead of a constant.
> + {}
> +};
> +
> +MODULE_DEVICE_TABLE(i2c, pxe1610_id);
> +
> +/* This is the driver that will be inserted */
This comment does not add any value.
> +static struct i2c_driver pxe1610_driver = {
> + .driver = {
> + .name = "pxe1610",
> + },
> + .probe = pxe1610_probe,
> + .remove = pmbus_do_remove,
> + .id_table = pxe1610_id,
> +};
> +
> +module_i2c_driver(pxe1610_driver);
> +
> +MODULE_AUTHOR("Vijay Khemka <vijaykhemka@...com>");
> +MODULE_DESCRIPTION("PMBus driver for Infineon PXE1610, PXE1110 and PXM1310");
> +MODULE_LICENSE("GPL");
>
Powered by blists - more mailing lists