linux-kernel - [PATCH REPOST v8 1/3] dt-bindings: i2c: extend existing opencore bindings.

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1559369475-15374-2-git-send-email-sagar.kadam@sifive.com>
Date:   Sat,  1 Jun 2019 11:41:13 +0530
From:   Sagar Shrikant Kadam <sagar.kadam@...ive.com>
To:     robh+dt@...nel.org, mark.rutland@....com, peter@...sgaard.com,
        andrew@...n.ch, palmer@...ive.com, paul.walmsley@...ive.com,
        sagar.kadam@...ive.com, linux-i2c@...r.kernel.org,
        devicetree@...r.kernel.org, linux-riscv@...ts.infradead.org,
        linux-kernel@...r.kernel.org
Subject: [PATCH REPOST v8 1/3] dt-bindings: i2c: extend existing opencore bindings.

Reformatted compatibility strings to one valid combination on
each line.
Add FU540-C000 specific device tree bindings to already available
i2-ocores file. This device is available on
HiFive Unleashed Rev A00 board. Move interrupt under optional
property list as this can be optional.

The FU540-C000 SoC from sifive, has an Opencore's I2C block
reimplementation.

The DT compatibility string for this IP is present in HDL and available at.
https://github.com/sifive/sifive-blocks/blob/master/src/main/scala/devices/i2c/I2C.scala#L73

Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@...ive.com>
---
 Documentation/devicetree/bindings/i2c/i2c-ocores.txt | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/i2c/i2c-ocores.txt b/Documentation/devicetree/bindings/i2c/i2c-ocores.txt
index 17bef9a..6b25a80 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-ocores.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-ocores.txt
@@ -1,9 +1,13 @@
 Device tree configuration for i2c-ocores
 
 Required properties:
-- compatible      : "opencores,i2c-ocores" or "aeroflexgaisler,i2cmst"
+- compatible      : "opencores,i2c-ocores"
+                    "aeroflexgaisler,i2cmst"
+                    "sifive,fu540-c000-i2c", "sifive,i2c0"
+                    For Opencore based I2C IP block reimplemented in
+                    FU540-C000 SoC. Please refer to sifive-blocks-ip-versioning.txt
+                    for additional details.
 - reg             : bus address start and address range size of device
-- interrupts      : interrupt number
 - clocks          : handle to the controller clock; see the note below.
                     Mutually exclusive with opencores,ip-clock-frequency
 - opencores,ip-clock-frequency: frequency of the controller clock in Hz;
@@ -12,6 +16,7 @@ Required properties:
 - #size-cells     : should be <0>
 
 Optional properties:
+- interrupts      : interrupt number.
 - clock-frequency : frequency of bus clock in Hz; see the note below.
                     Defaults to 100 KHz when the property is not specified
 - reg-shift       : device register offsets are shifted by this value
-- 
1.9.1