linux-kernel - [PATCH v1 1/4] dt-bindings: net: bluetooth: add boot-gpios property to UART-based device

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Sun, 2 Jun 2019 09:04:14 +0800
From:   <sean.wang@...iatek.com>
To:     <robh+dt@...nel.org>, <mark.rutland@....com>,
        <marcel@...tmann.org>, <johan.hedberg@...il.com>
CC:     <devicetree@...r.kernel.org>, <linux-bluetooth@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-mediatek@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>, Sean Wang <sean.wang@...iatek.com>
Subject: [PATCH v1 1/4] dt-bindings: net: bluetooth: add boot-gpios property to UART-based device

From: Sean Wang <sean.wang@...iatek.com>

Not every platform has the pinctrl device integrates the GPIO the function
such as MT7621 whose pinctrl and GPIO are separate hardware so adding an
additional boot-gpios property for such platform allows them to bring up
the device.

Signed-off-by: Sean Wang <sean.wang@...iatek.com>
---
 .../devicetree/bindings/net/mediatek-bluetooth.txt  | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt b/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt
index 41a7dcc80f5b..14f23b354a6d 100644
--- a/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt
+++ b/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt
@@ -50,11 +50,24 @@ Required properties:
 		  "mediatek,mt7663u-bluetooth": for MT7663U device
 		  "mediatek,mt7668u-bluetooth": for MT7668U device
 - vcc-supply:	Main voltage regulator
+
+If the pin controller on the platform can support both pinmux and GPIO
+control such as the most of MediaTek platform. Please use below properties.
+
 - pinctrl-names: Should be "default", "runtime"
 - pinctrl-0: Should contain UART RXD low when the device is powered up to
 	     enter proper bootstrap mode.
 - pinctrl-1: Should contain UART mode pin ctrl
 
+Else, the pin controller on the platform only can support pinmux control and
+the GPIO control still has to rely on the dedicated GPIO controller such as
+a legacy MediaTek SoC, MT7621. Please use the below properties.
+
+- boot-gpios:	GPIO same to the pin as UART RXD and used to keep LOW when
+		the device is powered up to enter proper bootstrap mode when
+- pinctrl-names: Should be "default"
+- pinctrl-0: Should contain UART mode pin ctrl
+
 Optional properties:
 
 - reset-gpios:	GPIO used to reset the device whose initial state keeps low,
-- 
2.17.1