linux-kernel - Re: [PATCH 1/1] ARM: dts: meson8b: mxq: improve support for the TRONFY MXQ S805

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [day] [month] [year] [list]

Date:   Mon, 03 Jun 2019 15:18:43 -0700
From:   Kevin Hilman <khilman@...libre.com>
To:     hex dump <hexdump0815@...il.com>,
        Martin Blumenstingl <martin.blumenstingl@...glemail.com>
Cc:     linux-amlogic@...ts.infradead.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 1/1] ARM: dts: meson8b: mxq: improve support for the TRONFY MXQ S805

hex dump <hexdump0815@...il.com> writes:

> Am Fr., 24. Mai 2019 um 20:19 Uhr schrieb Martin Blumenstingl <
> martin.blumenstingl@...glemail.com>:
>
>> The TRONFY MXQ comes with either 1GB or 2GB RAM.
>>
>> Both variants share (like most boards based on Amlogic reference
>> designs):
>> - 10/100 PHY (IC Plus IP101GR) with GPIOH_4 being the reset line and
>>   GPIOH_3 the interrupt line
>> - SD card slot with the card detection GPIO at CARD_6
>> - VCCK is generated by PWM_C with a period of 1148ns and XTAL as input
>>   clock
>> - USB OTG exposed on one of the USB-A connectors
>> - 4-port USB hub with 3 ports exposed to the outside
>>
>> There seem the multiple board revision out there according to various
>> forum posts:
>> - storage: eMMC or NAND flash
>> - wifi: Ampak AP6210 or Realtek 8189
>>
>> Add support for the following functionality:
>> - SoC temperature (hwmon)
>> - changing the CPU voltage
>> - Ethernet connectivity
>> - SD card
>> - USB
>>
>> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
>>
>
> Tested-by: hexdump <hexdump0815@...glemail.com>

Thanks for testing.

Queued for v5,3,

Kevin