linux-kernel - [PATCH 4.19 01/32] bonding/802.3ad: fix slave link initialization transition states

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20190603090308.660242491@linuxfoundation.org>
Date:   Mon,  3 Jun 2019 11:07:55 +0200
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org, Jay Vosburgh <j.vosburgh@...il.com>,
        Veaceslav Falico <vfalico@...il.com>,
        Andy Gospodarek <andy@...yhouse.net>,
        "David S. Miller" <davem@...emloft.net>, netdev@...r.kernel.org,
        Heesoon Kim <Heesoon.Kim@...atus.com>,
        Jarod Wilson <jarod@...hat.com>,
        Jay Vosburgh <jay.vosburgh@...onical.com>
Subject: [PATCH 4.19 01/32] bonding/802.3ad: fix slave link initialization transition states

From: Jarod Wilson <jarod@...hat.com>

[ Upstream commit 334031219a84b9994594015aab85ed7754c80176 ]

Once in a while, with just the right timing, 802.3ad slaves will fail to
properly initialize, winding up in a weird state, with a partner system
mac address of 00:00:00:00:00:00. This started happening after a fix to
properly track link_failure_count tracking, where an 802.3ad slave that
reported itself as link up in the miimon code, but wasn't able to get a
valid speed/duplex, started getting set to BOND_LINK_FAIL instead of
BOND_LINK_DOWN. That was the proper thing to do for the general "my link
went down" case, but has created a link initialization race that can put
the interface in this odd state.

The simple fix is to instead set the slave link to BOND_LINK_DOWN again,
if the link has never been up (last_link_up == 0), so the link state
doesn't bounce from BOND_LINK_DOWN to BOND_LINK_FAIL -- it hasn't failed
in this case, it simply hasn't been up yet, and this prevents the
unnecessary state change from DOWN to FAIL and getting stuck in an init
failure w/o a partner mac.

Fixes: ea53abfab960 ("bonding/802.3ad: fix link_failure_count tracking")
CC: Jay Vosburgh <j.vosburgh@...il.com>
CC: Veaceslav Falico <vfalico@...il.com>
CC: Andy Gospodarek <andy@...yhouse.net>
CC: "David S. Miller" <davem@...emloft.net>
CC: netdev@...r.kernel.org
Tested-by: Heesoon Kim <Heesoon.Kim@...atus.com>
Signed-off-by: Jarod Wilson <jarod@...hat.com>
Acked-by: Jay Vosburgh <jay.vosburgh@...onical.com>
Signed-off-by: David S. Miller <davem@...emloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
 drivers/net/bonding/bond_main.c |   15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -3107,13 +3107,18 @@ static int bond_slave_netdev_event(unsig
 	case NETDEV_CHANGE:
 		/* For 802.3ad mode only:
 		 * Getting invalid Speed/Duplex values here will put slave
-		 * in weird state. So mark it as link-fail for the time
-		 * being and let link-monitoring (miimon) set it right when
-		 * correct speeds/duplex are available.
+		 * in weird state. Mark it as link-fail if the link was
+		 * previously up or link-down if it hasn't yet come up, and
+		 * let link-monitoring (miimon) set it right when correct
+		 * speeds/duplex are available.
 		 */
 		if (bond_update_speed_duplex(slave) &&
-		    BOND_MODE(bond) == BOND_MODE_8023AD)
-			slave->link = BOND_LINK_FAIL;
+		    BOND_MODE(bond) == BOND_MODE_8023AD) {
+			if (slave->last_link_up)
+				slave->link = BOND_LINK_FAIL;
+			else
+				slave->link = BOND_LINK_DOWN;
+		}
 
 		if (BOND_MODE(bond) == BOND_MODE_8023AD)
 			bond_3ad_adapter_speed_duplex_changed(slave);