| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAEKpxB=RdYF9eEvAJ+R7sT6OtdtBWjhMM1am+EhaN=9ZO9Gd2A@mail.gmail.com>
Date: Tue, 4 Jun 2019 10:43:23 +0200
From: Code Kipper <codekipper@...il.com>
To: Maxime Ripard <maxime.ripard@...tlin.com>
Cc: Chen-Yu Tsai <wens@...e.org>,
linux-sunxi <linux-sunxi@...glegroups.com>,
linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
linux-kernel <linux-kernel@...r.kernel.org>,
Linux-ALSA <alsa-devel@...a-project.org>,
"Andrea Venturi (pers)" <be17068@...rbole.bo.it>
Subject: Re: [PATCH v4 6/9] ASoC: sun4i-i2s: Add multi-lane functionality
On Tue, 4 Jun 2019 at 09:58, Maxime Ripard <maxime.ripard@...tlin.com> wrote:
>
> On Mon, Jun 03, 2019 at 07:47:32PM +0200, codekipper@...il.com wrote:
> > From: Marcus Cooper <codekipper@...il.com>
> >
> > The i2s block supports multi-lane i2s output however this functionality
> > is only possible in earlier SoCs where the pins are exposed and for
> > the i2s block used for HDMI audio on the later SoCs.
> >
> > To enable this functionality, an optional property has been added to
> > the bindings.
> >
> > Signed-off-by: Marcus Cooper <codekipper@...il.com>
>
> I'd like to have Mark's input on this, but I'm really worried about
> the interaction with the proper TDM support.
>
> Our fundamental issue is that the controller can have up to 8
> channels, but either on 4 lines (instead of 1), or 8 channels on 1
> (like proper TDM) (or any combination between the two, but that should
> be pretty rare).
I understand...maybe the TDM needs to be extended to support this to consider
channel mapping and multiple transfer lines. I was thinking about the later when
someone was requesting support on IIRC a while ago, I thought masking might
of been a solution. These can wait as the only consumer at the moment is
LibreELEC and we can patch it there.
Do you have any ideas Master?
CK
>
> You're trying to do the first one, and I'm trying to do the second one.
>
> There's a number of assumptions later on that will break the TDM case,
> see below for examples
>
> > ---
> > sound/soc/sunxi/sun4i-i2s.c | 44 ++++++++++++++++++++++++++++++++-----
> > 1 file changed, 39 insertions(+), 5 deletions(-)
> >
> > diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
> > index bca73b3c0d74..75217fb52bfa 100644
> > --- a/sound/soc/sunxi/sun4i-i2s.c
> > +++ b/sound/soc/sunxi/sun4i-i2s.c
> > @@ -23,7 +23,7 @@
> >
> > #define SUN4I_I2S_CTRL_REG 0x00
> > #define SUN4I_I2S_CTRL_SDO_EN_MASK GENMASK(11, 8)
> > -#define SUN4I_I2S_CTRL_SDO_EN(sdo) BIT(8 + (sdo))
> > +#define SUN4I_I2S_CTRL_SDO_EN(lines) (((1 << lines) - 1) << 8)
> > #define SUN4I_I2S_CTRL_MODE_MASK BIT(5)
> > #define SUN4I_I2S_CTRL_MODE_SLAVE (1 << 5)
> > #define SUN4I_I2S_CTRL_MODE_MASTER (0 << 5)
> > @@ -355,14 +355,23 @@ static int sun4i_i2s_hw_params(struct snd_pcm_substream *substream,
> > struct sun4i_i2s *i2s = snd_soc_dai_get_drvdata(dai);
> > int sr, wss, channels;
> > u32 width;
> > + int lines;
> >
> > channels = params_channels(params);
> > - if (channels != 2) {
> > + if ((channels > dai->driver->playback.channels_max) ||
> > + (channels < dai->driver->playback.channels_min)) {
> > dev_err(dai->dev, "Unsupported number of channels: %d\n",
> > channels);
> > return -EINVAL;
> > }
> >
> > + lines = (channels + 1) / 2;
> > +
> > + /* Enable the required output lines */
> > + regmap_update_bits(i2s->regmap, SUN4I_I2S_CTRL_REG,
> > + SUN4I_I2S_CTRL_SDO_EN_MASK,
> > + SUN4I_I2S_CTRL_SDO_EN(lines));
> > +
>
> This has the assumption that each line will have 2 channels, which is wrong.
>
> > if (i2s->variant->is_h3_i2s_based) {
> > regmap_update_bits(i2s->regmap, SUN8I_I2S_CHAN_CFG_REG,
> > SUN8I_I2S_CHAN_CFG_TX_SLOT_NUM_MASK,
> > @@ -373,8 +382,19 @@ static int sun4i_i2s_hw_params(struct snd_pcm_substream *substream,
> > }
> >
> > /* Map the channels for playback and capture */
> > - regmap_field_write(i2s->field_txchanmap, 0x76543210);
> > regmap_field_write(i2s->field_rxchanmap, 0x00003210);
> > + regmap_field_write(i2s->field_txchanmap, 0x10);
> > + if (i2s->variant->is_h3_i2s_based) {
> > + if (channels > 2)
> > + regmap_write(i2s->regmap,
> > + SUN8I_I2S_TX_CHAN_MAP_REG+4, 0x32);
> > + if (channels > 4)
> > + regmap_write(i2s->regmap,
> > + SUN8I_I2S_TX_CHAN_MAP_REG+8, 0x54);
> > + if (channels > 6)
> > + regmap_write(i2s->regmap,
> > + SUN8I_I2S_TX_CHAN_MAP_REG+12, 0x76);
> > + }
>
> And this creates a mapping matching that.
>
> > /* Configure the channels */
> > regmap_field_write(i2s->field_txchansel,
> > @@ -1057,9 +1077,10 @@ static int sun4i_i2s_init_regmap_fields(struct device *dev,
> > static int sun4i_i2s_probe(struct platform_device *pdev)
> > {
> > struct sun4i_i2s *i2s;
> > + struct snd_soc_dai_driver *soc_dai;
> > struct resource *res;
> > void __iomem *regs;
> > - int irq, ret;
> > + int irq, ret, val;
> >
> > i2s = devm_kzalloc(&pdev->dev, sizeof(*i2s), GFP_KERNEL);
> > if (!i2s)
> > @@ -1126,6 +1147,19 @@ static int sun4i_i2s_probe(struct platform_device *pdev)
> > i2s->capture_dma_data.addr = res->start + SUN4I_I2S_FIFO_RX_REG;
> > i2s->capture_dma_data.maxburst = 8;
> >
> > + soc_dai = devm_kmemdup(&pdev->dev, &sun4i_i2s_dai,
> > + sizeof(*soc_dai), GFP_KERNEL);
> > + if (!soc_dai) {
> > + ret = -ENOMEM;
> > + goto err_pm_disable;
> > + }
> > +
> > + if (!of_property_read_u32(pdev->dev.of_node,
> > + "allwinner,playback-channels", &val)) {
> > + if (val >= 2 && val <= 8)
> > + soc_dai->playback.channels_max = val;
> > + }
> > +
>
> I'm not quite sure how this works.
>
> of_property_read_u32 will return 0, so you will enter in the
> condition. But what happens if the property is missing?
>
> Maxime
>
> --
> Maxime Ripard, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com
Powered by blists - more mailing lists