| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20190604101409.2078-9-yamada.masahiro@socionext.com>
Date: Tue, 4 Jun 2019 19:14:02 +0900
From: Masahiro Yamada <yamada.masahiro@...ionext.com>
To: linux-kbuild@...r.kernel.org
Cc: Randy Dunlap <rdunlap@...radead.org>,
Arnd Bergmann <arnd@...db.de>,
David Howells <dhowells@...hat.com>,
Sam Ravnborg <sam@...nborg.org>,
Jani Nikula <jani.nikula@...el.com>,
Masahiro Yamada <yamada.masahiro@...ionext.com>,
Michal Marek <michal.lkml@...kovi.net>,
linux-kernel@...r.kernel.org
Subject: [PATCH 08/15] kbuild: add 'headers' target to build up ready-to-install uapi headers
In Linux build system, build targets and installation targets are
separated.
Examples are:
- 'make vmlinux' -> 'make install'
- 'make modules' -> 'make modules_install'
- 'make dtbs' -> 'make dtbs_install'
- 'make vdso' -> 'make vdso_install'
The intention is to run the build targets under the normal privilege,
then the installation targets under the root privilege since we need
the write permission to the system directories.
We have 'make headers_install" but the corresponding 'make headers'
stage does not exist. The purpose of headers_install is to provide
the kernel interface to C library. So, nobody would try to install
headers to /usr/include directly.
If 'sudo make INSTALL_HDR_PATH=/usr/include headers_install' were run,
some build artifacts in the kernel tree would be owned by root because
some of uapi headers are generated by 'uapi-asm-generic', 'archheaders'
targets.
Anyway, I believe it makes sense to split the header installation into
two stages.
[1] 'make headers'
Process headers in uapi directories by scripts/headers_install.sh
and copy them to usr/include
[2] 'make headers_install'
Copy '*.h' verbatim from usr/include to $(INSTALL_HDR_PATH)/include
For the backward compatibility, 'headers_install' depends on 'headers'.
Some samples expect uapi headers in usr/include. So, the 'headers'
target is useful to build up them in the fixed location usr/include
irrespective of INSTALL_HDR_PATH.
Another benefit is to stop polluting the final destination with the
time-stamp files '.install' and '.check'. Maybe you can see them in
your toolchains.
Lastly, my main motivation is to prepare for compile-testing uapi
headers. To build something, we have to creating an object and .*.cmd
somewhere. The usr/include/ will be the work directory for that.
Signed-off-by: Masahiro Yamada <yamada.masahiro@...ionext.com>
---
Makefile | 23 +++++++++++++++--------
lib/Kconfig.debug | 4 +---
scripts/Makefile.headersinst | 8 ++++----
3 files changed, 20 insertions(+), 15 deletions(-)
diff --git a/Makefile b/Makefile
index f9c206eb3583..3c172dd516ff 100644
--- a/Makefile
+++ b/Makefile
@@ -262,7 +262,7 @@ old_version_h := include/linux/version.h
clean-targets := %clean mrproper cleandocs
no-dot-config-targets := $(clean-targets) \
cscope gtags TAGS tags help% %docs check% coccicheck \
- $(version_h) headers_% archheaders archscripts \
+ $(version_h) headers headers_% archheaders archscripts \
%asm-generic kernelversion %src-pkg
no-sync-config-targets := $(no-dot-config-targets) install %install \
kernelrelease
@@ -1178,25 +1178,32 @@ headerdep:
#Default location for installed headers
export INSTALL_HDR_PATH = $(objtree)/usr
-PHONY += archheaders archscripts
-
-PHONY += __headers
-__headers: $(version_h) scripts_unifdef uapi-asm-generic archheaders archscripts
+quiet_cmd_headers_install = INSTALL $(INSTALL_HDR_PATH)/include
+ cmd_headers_install = \
+ mkdir -p $(INSTALL_HDR_PATH); \
+ rsync -mrl --include='*/' --include='*\.h' --exclude='*' \
+ usr/include $(INSTALL_HDR_PATH)
PHONY += headers_install
-headers_install: __headers
+headers_install: headers
+ $(call cmd,headers_install)
+
+PHONY += archheaders archscripts
+
+PHONY += headers
+headers: $(version_h) scripts_unifdef uapi-asm-generic archheaders archscripts
$(if $(wildcard $(srctree)/arch/$(SRCARCH)/include/uapi/asm/Kbuild),, \
$(error Headers not exportable for the $(SRCARCH) architecture))
$(Q)$(MAKE) $(hdr-inst)=include/uapi dst=include
$(Q)$(MAKE) $(hdr-inst)=arch/$(SRCARCH)/include/uapi dst=include
PHONY += headers_check
-headers_check: headers_install
+headers_check: headers
$(Q)$(MAKE) $(hdr-inst)=include/uapi dst=include HDRCHECK=1
$(Q)$(MAKE) $(hdr-inst)=arch/$(SRCARCH)/include/uapi dst=include HDRCHECK=1
ifdef CONFIG_HEADERS_INSTALL
-prepare: headers_install
+prepare: headers
endif
ifdef CONFIG_HEADERS_CHECK
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 6a6ea4219d1e..0031a31d98c2 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -324,9 +324,7 @@ config HEADERS_CHECK
attempt to include files which were not exported, etc.
If you're making modifications to header files which are
- relevant for userspace, say 'Y', and check the headers
- exported to $(INSTALL_HDR_PATH) (usually 'usr/include' in
- your build tree), to make sure they're suitable.
+ relevant for userspace, say 'Y'.
config OPTIMIZE_INLINING
bool "Allow compiler to uninline functions marked 'inline'"
diff --git a/scripts/Makefile.headersinst b/scripts/Makefile.headersinst
index 3d1ebaabd1b6..1af6d0b06585 100644
--- a/scripts/Makefile.headersinst
+++ b/scripts/Makefile.headersinst
@@ -41,7 +41,7 @@ ifeq ($(skip-inst),)
kbuild-file := $(srctree)/$(obj)/Kbuild
-include $(kbuild-file)
-installdir := $(INSTALL_HDR_PATH)/$(dst)
+installdir := usr/$(dst)
gendir := $(objtree)/$(subst include/,include/generated/,$(obj))
header-files := $(notdir $(wildcard $(srcdir)/*.h))
header-files := $(filter-out $(no-export-headers), $(header-files))
@@ -60,10 +60,10 @@ output-files := $(addprefix $(installdir)/, $(all-files))
oldheaders := $(patsubst $(installdir)/%,%,$(wildcard $(installdir)/*.h))
unwanted := $(filter-out $(all-files),$(oldheaders))
-# Prefix unwanted with full paths to $(INSTALL_HDR_PATH)
+# Prefix unwanted with full paths to objtree
unwanted-file := $(addprefix $(installdir)/, $(unwanted))
-printdir = $(patsubst $(INSTALL_HDR_PATH)/%/,%,$(dir $@))
+printdir = $(patsubst %/,%,$(dir $@))
quiet_cmd_install = INSTALL $(printdir) ($(words $(all-files))\
file$(if $(word 2, $(all-files)),s))
@@ -81,7 +81,7 @@ quiet_cmd_check = CHECK $(printdir) ($(words $(all-files)) files)
cmd_check = for f in $(all-files); do \
echo "$(installdir)/$${f}"; done \
| xargs \
- $(PERL) $< $(INSTALL_HDR_PATH)/include $(SRCARCH); \
+ $(PERL) $< usr/include $(SRCARCH); \
touch $@
ifndef HDRCHECK
--
2.17.1
Powered by blists - more mailing lists