lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190604025114.46085-1-andy.tang@nxp.com>
Date:   Tue,  4 Jun 2019 10:51:14 +0800
From:   Yuantian Tang <andy.tang@....com>
To:     edubezval@...il.com, rui.zhang@...el.com
Cc:     daniel.lezcano@...aro.org, leoyang.li@....com,
        linux-pm@...r.kernel.org, linux-kernel@...r.kernel.org,
        Yuantian Tang <andy.tang@....com>
Subject: [PATCH] thermal: qoriq: add thermal monitor unit version 2 support

Thermal Monitor Unit v2 is introduced on new Layscape SoC.
Compared to v1, TMUv2 has a little different register layout
and digital output is fairly linear.

Signed-off-by: Yuantian Tang <andy.tang@....com>
---
 drivers/thermal/qoriq_thermal.c | 122 +++++++++++++++++++++++++-------
 1 file changed, 98 insertions(+), 24 deletions(-)

diff --git a/drivers/thermal/qoriq_thermal.c b/drivers/thermal/qoriq_thermal.c
index 3b5f5b3fb1bc..0df6dfddf804 100644
--- a/drivers/thermal/qoriq_thermal.c
+++ b/drivers/thermal/qoriq_thermal.c
@@ -13,6 +13,15 @@
 #include "thermal_core.h"
 
 #define SITES_MAX	16
+#define TMR_DISABLE	0x0
+#define TMR_ME		0x80000000
+#define TMR_ALPF	0x0c000000
+#define TMR_ALPF_V2	0x03000000
+#define TMTMIR_DEFAULT	0x0000000f
+#define TIER_DISABLE	0x0
+#define TEUMR0_V2	0x51009C00
+#define TMU_VER1	0x1
+#define TMU_VER2	0x2
 
 /*
  * QorIQ TMU Registers
@@ -23,17 +32,55 @@ struct qoriq_tmu_site_regs {
 	u8 res0[0x8];
 };
 
-struct qoriq_tmu_regs {
+struct qoriq_tmu_regs_v2 {
+	u32 tmr;		/* Mode Register */
+	u32 tsr;		/* Status Register */
+	u32 tmsr;		/* monitor site register */
+	u32 tmtmir;		/* Temperature measurement interval Register */
+	u8 res0[0x10];
+	u32 tier;		/* Interrupt Enable Register */
+	u32 tidr;		/* Interrupt Detect Register */
+	u8 res1[0x8];
+	u32 tiiscr;		/* interrupt immediate site capture register */
+	u32 tiascr;		/* interrupt average site capture register */
+	u32 ticscr;		/* Interrupt Critical Site Capture Register */
+	u32 res2;
+	u32 tmhtcr;		/* monitor high temperature capture register */
+	u32 tmltcr;		/* monitor low temperature capture register */
+	u32 tmrtrcr;	/* monitor rising temperature rate capture register */
+	u32 tmftrcr;	/* monitor falling temperature rate capture register */
+	u32 tmhtitr;	/* High Temperature Immediate Threshold */
+	u32 tmhtatr;	/* High Temperature Average Threshold */
+	u32 tmhtactr;	/* High Temperature Average Crit Threshold */
+	u32 res3;
+	u32 tmltitr;	/* monitor low temperature immediate threshold */
+	u32 tmltatr;	/* monitor low temperature average threshold register */
+	u32 tmltactr;	/* monitor low temperature average critical threshold */
+	u32 res4;
+	u32 tmrtrctr;	/* monitor rising temperature rate critical threshold */
+	u32 tmftrctr;	/* monitor falling temperature rate critical threshold*/
+	u8 res5[0x8];
+	u32 ttcfgr;	/* Temperature Configuration Register */
+	u32 tscfgr;	/* Sensor Configuration Register */
+	u8 res6[0x78];
+	struct qoriq_tmu_site_regs site[SITES_MAX];
+	u8 res7[0x9f8];
+	u32 ipbrr0;		/* IP Block Revision Register 0 */
+	u32 ipbrr1;		/* IP Block Revision Register 1 */
+	u8 res8[0x300];
+	u32 teumr0;
+	u32 teumr1;
+	u32 teumr2;
+	u32 res9;
+	u32 ttrcr[4];	/* Temperature Range Control Register */
+};
+
+struct qoriq_tmu_regs_v1 {
 	u32 tmr;		/* Mode Register */
-#define TMR_DISABLE	0x0
-#define TMR_ME		0x80000000
-#define TMR_ALPF	0x0c000000
 	u32 tsr;		/* Status Register */
 	u32 tmtmir;		/* Temperature measurement interval Register */
-#define TMTMIR_DEFAULT	0x0000000f
 	u8 res0[0x14];
 	u32 tier;		/* Interrupt Enable Register */
-#define TIER_DISABLE	0x0
 	u32 tidr;		/* Interrupt Detect Register */
 	u32 tiscr;		/* Interrupt Site Capture Register */
 	u32 ticscr;		/* Interrupt Critical Site Capture Register */
@@ -53,10 +100,7 @@ struct qoriq_tmu_regs {
 	u32 ipbrr0;		/* IP Block Revision Register 0 */
 	u32 ipbrr1;		/* IP Block Revision Register 1 */
 	u8 res6[0x310];
-	u32 ttr0cr;		/* Temperature Range 0 Control Register */
-	u32 ttr1cr;		/* Temperature Range 1 Control Register */
-	u32 ttr2cr;		/* Temperature Range 2 Control Register */
-	u32 ttr3cr;		/* Temperature Range 3 Control Register */
+	u32 ttrcr[4];		/* Temperature Range Control Register */
 };
 
 struct qoriq_tmu_data;
@@ -71,7 +115,9 @@ struct qoriq_sensor {
 };
 
 struct qoriq_tmu_data {
-	struct qoriq_tmu_regs __iomem *regs;
+	int ver;
+	struct qoriq_tmu_regs_v1 __iomem *regs;
+	struct qoriq_tmu_regs_v2 __iomem *regv2;
 	bool little_endian;
 	struct qoriq_sensor	*sensor[SITES_MAX];
 };
@@ -111,7 +157,7 @@ static const struct thermal_zone_of_device_ops tmu_tz_ops = {
 static int qoriq_tmu_register_tmu_zone(struct platform_device *pdev)
 {
 	struct qoriq_tmu_data *qdata = platform_get_drvdata(pdev);
-	int id, sites = 0;
+	int id, sites = 0, sv2 = 0;
 
 	for (id = 0; id < SITES_MAX; id++) {
 		qdata->sensor[id] = devm_kzalloc(&pdev->dev,
@@ -130,12 +176,24 @@ static int qoriq_tmu_register_tmu_zone(struct platform_device *pdev)
 				return PTR_ERR(qdata->sensor[id]->tzd);
 		}
 
-		sites |= 0x1 << (15 - id);
+		if (qdata->ver == TMU_VER1)
+			sites |= 0x1 << (15 - id);
+		else
+			sv2 |= 0x1 << id;
 	}
 
 	/* Enable monitoring */
-	if (sites != 0)
-		tmu_write(qdata, sites | TMR_ME | TMR_ALPF, &qdata->regs->tmr);
+	if (qdata->ver == TMU_VER1) {
+		if (sites != 0)
+			tmu_write(qdata, sites | TMR_ME | TMR_ALPF,
+					&qdata->regs->tmr);
+	} else {
+		if (sv2 != 0) {
+			tmu_write(qdata, sv2, &qdata->regv2->tmsr);
+			tmu_write(qdata, TMR_ME | TMR_ALPF_V2,
+					&qdata->regv2->tmr);
+		}
+	}
 
 	return 0;
 }
@@ -148,16 +206,20 @@ static int qoriq_tmu_calibration(struct platform_device *pdev)
 	struct device_node *np = pdev->dev.of_node;
 	struct qoriq_tmu_data *data = platform_get_drvdata(pdev);
 
-	if (of_property_read_u32_array(np, "fsl,tmu-range", range, 4)) {
-		dev_err(&pdev->dev, "missing calibration range.\n");
-		return -ENODEV;
+	len = of_property_count_u32_elems(np, "fsl,tmu-range");
+	if (len == -ENODATA || len == -EINVAL || len > 4) {
+		dev_err(&pdev->dev, "invalid range data.\n");
+		return len;
 	}
 
-	/* Init temperature range registers */
-	tmu_write(data, range[0], &data->regs->ttr0cr);
-	tmu_write(data, range[1], &data->regs->ttr1cr);
-	tmu_write(data, range[2], &data->regs->ttr2cr);
-	tmu_write(data, range[3], &data->regs->ttr3cr);
+	val = of_property_read_u32_array(np, "fsl,tmu-range", range, len);
+	if (val != 0) {
+		dev_err(&pdev->dev, "invalid range data.\n");
+		return val;
+	}
+
+	for (i = 0; i < len; i++)
+		tmu_write(data, range[i], &data->regs->ttrcr[i]);
 
 	calibration = of_get_property(np, "fsl,tmu-calibration", &len);
 	if (calibration == NULL || len % 8) {
@@ -181,7 +243,12 @@ static void qoriq_tmu_init_device(struct qoriq_tmu_data *data)
 	tmu_write(data, TIER_DISABLE, &data->regs->tier);
 
 	/* Set update_interval */
-	tmu_write(data, TMTMIR_DEFAULT, &data->regs->tmtmir);
+	if (data->ver == TMU_VER1) {
+		tmu_write(data, TMTMIR_DEFAULT, &data->regs->tmtmir);
+	} else {
+		tmu_write(data, TMTMIR_DEFAULT, &data->regv2->tmtmir);
+		tmu_write(data, TEUMR0_V2, &data->regv2->teumr0);
+	}
 
 	/* Disable monitoring */
 	tmu_write(data, TMR_DISABLE, &data->regs->tmr);
@@ -190,6 +257,7 @@ static void qoriq_tmu_init_device(struct qoriq_tmu_data *data)
 static int qoriq_tmu_probe(struct platform_device *pdev)
 {
 	int ret;
+	u32 ver;
 	struct qoriq_tmu_data *data;
 	struct device_node *np = pdev->dev.of_node;
 
@@ -214,6 +282,12 @@ static int qoriq_tmu_probe(struct platform_device *pdev)
 		goto err_iomap;
 	}
 
+	/* version register offset at: 0xbf8 on both v1 and v2 */
+	ver = tmu_read(data, &data->regs->ipbrr0);
+	data->ver = (ver >> 8) & 0xff;
+	if (data->ver == TMU_VER2)
+		data->regv2 = (void __iomem *)data->regs;
+
 	qoriq_tmu_init_device(data);	/* TMU initialization */
 
 	ret = qoriq_tmu_calibration(pdev);	/* TMU calibration */
-- 
2.17.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ