linux-kernel - Re: [PATCH v3 0/5] arch: riscv: add board and SoC DT file support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <86y32hh16j.fsf@baylibre.com>
Date:   Tue, 04 Jun 2019 16:31:32 +0200
From:   Loys Ollivier <lollivier@...libre.com>
To:     Paul Walmsley <paul.walmsley@...ive.com>,
        linux-kernel@...r.kernel.org, linux-riscv@...ts.infradead.org
Subject: Re: [PATCH v3 0/5] arch: riscv: add board and SoC DT file support

On Sun 02 Jun 2019 at 01:04, Paul Walmsley <paul.walmsley@...ive.com> wrote:

> Add support for building flattened DT files from DT source files under
> arch/riscv/boot/dts.  Follow existing kernel precedent from other SoC
> architectures.  Start our board support by adding initial support for
> the SiFive FU540 SoC and the first development board that uses it, the
> SiFive HiFive Unleashed A00.
>
> This third version of the patch set adds I2C data for the chip,
> incorporates all remaining changes that riscv-pk was making
> automatically, and addresses a comment from Rob Herring
> <robh@...nel.org>.
>
> Boot-tested on v5.2-rc1 on a HiFive Unleashed A00 board, using the
> BBL and open-source FSBL, with modifications to pass in the DTB
> file generated by these patches.
>
> This patch series can be found, along with the PRCI patch set
> and the DT macro prerequisite patch, at:
>
> https://github.com/sifive/riscv-linux/tree/dev/paulw/dts-v5.2-rc1
>
>
> - Paul
>

Tested patch 1, 4 and 5 using FSBL + OpenSBI + U-Boot on HiFive Unleashed.
Tested-by: Loys Ollivier <lollivier@...libre.com>

>
> Paul Walmsley (5):
>   arch: riscv: add support for building DTB files from DT source data
>   dt-bindings: riscv: sifive: add YAML documentation for the SiFive
>     FU540
>   dt-bindings: riscv: convert cpu binding to json-schema
>   riscv: dts: add initial support for the SiFive FU540-C000 SoC
>   riscv: dts: add initial board data for the SiFive HiFive Unleashed
>
>  .../devicetree/bindings/riscv/cpus.yaml       | 168 ++++++++++++++
>  .../devicetree/bindings/riscv/sifive.yaml     |  25 ++
>  MAINTAINERS                                   |   9 +
>  arch/riscv/boot/dts/Makefile                  |   2 +
>  arch/riscv/boot/dts/sifive/Makefile           |   2 +
>  arch/riscv/boot/dts/sifive/fu540-c000.dtsi    | 215 ++++++++++++++++++
>  .../boot/dts/sifive/hifive-unleashed-a00.dts  |  67 ++++++
>  7 files changed, 488 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/riscv/cpus.yaml
>  create mode 100644 Documentation/devicetree/bindings/riscv/sifive.yaml
>  create mode 100644 arch/riscv/boot/dts/Makefile
>  create mode 100644 arch/riscv/boot/dts/sifive/Makefile
>  create mode 100644 arch/riscv/boot/dts/sifive/fu540-c000.dtsi
>  create mode 100644 arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts

Note: the -fu540 was dropped from the previous version which results in
a different dtb file.

Loys