linux-kernel - Re: [PATCH 2/8] i2c: i2c-qcom-geni: Signify successful driver probe

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Wed, 5 Jun 2019 09:23:27 +0100
From:   Lee Jones <lee.jones@...aro.org>
To:     Ard Biesheuvel <ard.biesheuvel@...aro.org>
Cc:     Bjorn Andersson <bjorn.andersson@...aro.org>, balbi@...nel.org,
        wsa+renesas@...g-engineering.com,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Linus Walleij <linus.walleij@...aro.org>,
        linux-usb <linux-usb@...r.kernel.org>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        David Brown <david.brown@...aro.org>, alokc@...eaurora.org,
        kramasub@...eaurora.org, linux-i2c <linux-i2c@...r.kernel.org>,
        "open list:GPIO SUBSYSTEM" <linux-gpio@...r.kernel.org>,
        linux-arm-msm <linux-arm-msm@...r.kernel.org>,
        Andy Gross <andy.gross@...aro.org>,
        Jeffrey Hugo <jlhugo@...il.com>,
        linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH 2/8] i2c: i2c-qcom-geni: Signify successful driver probe

On Wed, 05 Jun 2019, Ard Biesheuvel wrote:

> On Wed, 5 Jun 2019 at 09:16, Lee Jones <lee.jones@...aro.org> wrote:
> >
> > On Tue, 04 Jun 2019, Bjorn Andersson wrote:
> >
> > > On Tue 04 Jun 03:44 PDT 2019, Lee Jones wrote:
> > >
> > > > The Qualcomm Geni I2C driver currently probes silently which can be
> > > > confusing when debugging potential issues.  Add a low level (INFO)
> > > > print when each I2C controller is successfully initially set-up.
> > > >
> > > > Signed-off-by: Lee Jones <lee.jones@...aro.org>
> > > > ---
> > > >  drivers/i2c/busses/i2c-qcom-geni.c | 2 ++
> > > >  1 file changed, 2 insertions(+)
> > > >
> > > > diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
> > > > index 0fa93b448e8d..e27466d77767 100644
> > > > --- a/drivers/i2c/busses/i2c-qcom-geni.c
> > > > +++ b/drivers/i2c/busses/i2c-qcom-geni.c
> > > > @@ -598,6 +598,8 @@ static int geni_i2c_probe(struct platform_device *pdev)
> > > >             return ret;
> > > >     }
> > > >
> > > > +   dev_info(&pdev->dev, "Geni-I2C adaptor successfully added\n");
> > > > +
> > >
> > > I would prefer that we do not add such prints, as it would be to accept
> > > the downstream behaviour of spamming the log to the point where no one
> > > will ever look through it.
> >
> > We should be able to find a middle ground.  Spamming the log with all
> > sorts of device specific information/debug is obviously not
> > constructive, but a single liner to advertise that an important
> > device/controller has been successfully initialised is more helpful
> > than it is hinderous.
> >
> > This print was added due to the silent initialisation costing me
> > several hours of debugging ACPI device/driver code (albeit learning a
> > lot about ACPI as I go) just to find out that it was already doing the
> > right thing - just very quietly.
> >
> 
> I agree.
> 
> There are numerous EHCI drivers IIRC which, if compiled in,
> unconditionally print some blurb, whether you have the hardware or
> not, which is pretty annoying.
> 
> In this case, however, having a single line per successfully probed
> device (containing the dev_name and perhaps the MMIO base address or
> some other identifying feature) is pretty useful, and shouldn't be
> regarded as log spamming imo. dev_info() honours the 'quiet' kernel
> command line parameter, and so you will only see the message if you
> actually look at the log.

+999

This is exactly as I see it.

If people want a quiet log/fast boot-up times, they can request it.
Otherwise, it's far more useful to trade a second or two for
important information such as which devices are present/enabled on a
platform.

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog