lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1559734986-7379-11-git-send-email-yongqiang.niu@mediatek.com>
Date:   Wed, 5 Jun 2019 19:42:49 +0800
From:   <yongqiang.niu@...iatek.com>
To:     CK Hu <ck.hu@...iatek.com>, Philipp Zabel <p.zabel@...gutronix.de>,
        Rob Herring <robh+dt@...nel.org>,
        Matthias Brugger <matthias.bgg@...il.com>
CC:     David Airlie <airlied@...ux.ie>, Daniel Vetter <daniel@...ll.ch>,
        Mark Rutland <mark.rutland@....com>,
        <dri-devel@...ts.freedesktop.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-mediatek@...ts.infradead.org>,
        Yongqiang Niu <yongqiang.niu@...iatek.com>
Subject: [PATCH v3, 10/27] drm/mediatek: split DISP_REG_CONFIG_DSI_SEL setting into another use case

From: Yongqiang Niu <yongqiang.niu@...iatek.com>

Here is two modifition in this patch:
1.bls->dpi0 and rdma1->dsi are differen usecase,
Split DISP_REG_CONFIG_DSI_SEL setting into anther usecase
2.remove DISP_REG_CONFIG_DPI_SEL setting, DPI_SEL_IN_BLS is 0 and
this is same with hardware defautl setting,

Signed-off-by: Yongqiang Niu <yongqiang.niu@...iatek.com>
---
 drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
index 717609d..1bbabe6 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
@@ -401,10 +401,9 @@ static void mtk_ddp_sout_sel(void __iomem *config_regs,
 	} else if (cur == DDP_COMPONENT_BLS && next == DDP_COMPONENT_DPI0) {
 		writel_relaxed(BLS_TO_DPI_RDMA1_TO_DSI,
 			       config_regs + DISP_REG_CONFIG_OUT_SEL);
+	} else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DSI0) {
 		writel_relaxed(DSI_SEL_IN_RDMA,
 			       config_regs + DISP_REG_CONFIG_DSI_SEL);
-		writel_relaxed(DPI_SEL_IN_BLS,
-			       config_regs + DISP_REG_CONFIG_DPI_SEL);
 	}
 }
 
-- 
1.8.1.1.dirty

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ