| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 5 Jun 2019 13:56:05 +0200
From: Hans Verkuil <hverkuil@...all.nl>
To: Eugen.Hristev@...rochip.com, linux-media@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Cc: ksloat@...pglobal.com
Subject: Re: [PATCH v2] media: atmel: atmel-isc: split driver into driver base
and isc
Hi Eugen,
On 5/30/19 9:50 AM, Eugen.Hristev@...rochip.com wrote:
> From: Eugen Hristev <eugen.hristev@...rochip.com>
>
> This splits the Atmel ISC driver into a common base: atmel-isc-base.c
> and the driver probe/dt part , atmel-sama5d2-isc.c
> This is needed to keep a common ground for the sensor controller which will
> be reused.
> The atmel-isc will use the common symbols inside the atmel-isc-base
> Future driver will also use the same symbols and redefine different aspects,
> for a different version of the ISC.
> This is done to avoid complete code duplication by creating a totally
> different driver for the new variant of the ISC.
>
> Signed-off-by: Eugen Hristev <eugen.hristev@...rochip.com>
> ---
>
> Hello Hans,
>
> I am resending this with the required fixes.
> You asked me about the #ifdef around ATMEL_ISC_NAME, it's because I was
> thinking to have the ATMEL_ISC_NAME different by each driver that use
> the atmel-isc.h, but for now I removed any ifdef around it, and will
> consider a different define for new drivers.
>
> Changes in v2:
> - renamed atmel-isc.c to atmel-sama5d2-isc.c as sama5d2 is the SoC that
> includes this hardware block. The module will still be named atmel-isc.ko
> - removed ifdef around definition of ATMEL_ISC_NAME
> - moved external declarations in the specific files, this was breaking
> module loading
>
> v4l2-compliance SHA: 0d61ddede7d340ffa1c75a2882e30c455ef3d8b8, 32 bitatmel-isc f0008000.isc: ================= START STATUS =================
>
> atmelpliance test for atmel-isc device /dev/video0:
>
> Driver Info:
> Driver name : atmel-isc
> Card type : Atmel Image Sensor Controller
> Bus info : platform:atmel-isc f0008000.isc
> Driver version : 5.2.0
> Capabilities : 0x84200001
> Video Capture
> Streaming
> Extended Pix Format
> Device Capabilities
> Device Caps : 0x04200001
> Video Capture
> Streaming
> Extended Pix Format
>
> Required ioctls:
> test VIDIOC_QUERYCAP: OK
>
> Allow for multiple opens:
> test second /dev/video0 open: OK
> test VIDIOC_QUERYCAP: OK
> test VIDIOC_G/S_PRIORITY: OK
> test for unlimited opens: OK
>
> Debug ioctls:
> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> -isc f0008000.isc: Brightness: 0
> atmel-isc f0008000.isc: Contrast: 256
> atmel-isc f0008000.isc: Gamma: 2
> atmel-isc f0008000.isc: White Balance, Automatic: true
> atmel-isc f0008000.isc: ================== END STATUS ==================
> test VIDIOC_LOG_STATUS: OK
>
> Input ioctls:
> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> test VIDIOC_G/S/ENUMINPUT: OK
> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> Inputs: 1 Audio Inputs: 0 Tuners: 0
>
> Output ioctls:
> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> Outputs: 0 Audio Outputs: 0 Modulators: 0
>
> Input/Output configuration ioctls:
> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> test VIDIOC_G/S_EDID: OK (Not Supported)
>
> Control ioctls (Input 0):
> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
> test VIDIOC_QUERYCTRL: OK
> test VIDIOC_G/S_CTRL: OK
> test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> Standard Controls: 6 Private Controls: 0
>
> Format ioctls (Input 0):
> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> test VIDIOC_G/S_PARM: OK
> test VIDIOC_G_FBUF: OK (Not Supported)
> test VIDIOC_G_FMT: OK
> test VIDIOC_TRY_FMT: OK
> test VIDIOC_S_FMT: OK
> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> test Cropping: OK (Not Supported)
> test Composing: OK (Not Supported)
> test Scaling: OK (Not Supported)
>
> Codec ioctls (Input 0):
> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>
> Buffer ioctls (Input 0):
> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
> test VIDIOC_EXPBUF: OK
> test Requests: OK (Not Supported)
>
> Total for atmel-isc device /dev/video0: 44, Succeeded: 44, Failed: 0, Warnings: 0
>
>
> MAINTAINERS | 4 +-
> drivers/media/platform/atmel/Makefile | 4 +-
> drivers/media/platform/atmel/atmel-isc-base.c | 2148 ++++++++++++++++++
> drivers/media/platform/atmel/atmel-isc.c | 2634 ----------------------
> drivers/media/platform/atmel/atmel-isc.h | 192 ++
> drivers/media/platform/atmel/atmel-sama5d2-isc.c | 365 +++
> 6 files changed, 2711 insertions(+), 2636 deletions(-)
> create mode 100644 drivers/media/platform/atmel/atmel-isc-base.c
> delete mode 100644 drivers/media/platform/atmel/atmel-isc.c
> create mode 100644 drivers/media/platform/atmel/atmel-isc.h
> create mode 100644 drivers/media/platform/atmel/atmel-sama5d2-isc.c
>
Checkpatch gave me various warnings that I think should be addressed:
WARNING: externs should be avoided in .c files
#249: FILE: drivers/media/platform/atmel/atmel-isc-base.c:40:
+extern unsigned int sensor_preferred;
It looks like these module parameters can be moved to atmel-isc-base.c
and only an extern unsigned int debug should be added to the atmel-isc.h.
Externs in a source is indeed dubious.
CHECK: spinlock_t definition without comment
#681: FILE: drivers/media/platform/atmel/atmel-isc.h:27:
+ spinlock_t lock;
I know there was no comment before, but it might be nice to add one
now.
CHECK: Macro argument reuse 'hw' - possible side-effects?
#688: FILE: drivers/media/platform/atmel/atmel-isc.h:34:
+#define to_isc_clk(hw) container_of(hw, struct isc_clk, hw)
This seems really wrong. One hw refers to the argument, the
other is the name of a field in a struct. Use a different
name as the macro argument to avoid this confusion.
CHECK: spinlock_t definition without comment
#814: FILE: drivers/media/platform/atmel/atmel-isc.h:160:
+ spinlock_t dma_queue_lock;
CHECK: struct mutex definition without comment
#832: FILE: drivers/media/platform/atmel/atmel-isc.h:178:
+ struct mutex lock;
CHECK: spinlock_t definition without comment
#833: FILE: drivers/media/platform/atmel/atmel-isc.h:179:
+ spinlock_t awb_lock;
Comments would be nice.
WARNING: externs should be avoided in .c files
#909: FILE: drivers/media/platform/atmel/atmel-sama5d2-isc.c:57:
+extern struct isc_format formats_list[];
WARNING: externs should be avoided in .c files
#910: FILE: drivers/media/platform/atmel/atmel-sama5d2-isc.c:58:
+extern struct isc_format controller_formats[];
WARNING: externs should be avoided in .c files
#911: FILE: drivers/media/platform/atmel/atmel-sama5d2-isc.c:59:
+extern const u32 isc_gamma_table[GAMMA_MAX + 1][GAMMA_ENTRIES];
WARNING: externs should be avoided in .c files
#912: FILE: drivers/media/platform/atmel/atmel-sama5d2-isc.c:60:
+extern const struct regmap_config isc_regmap_config;
WARNING: externs should be avoided in .c files
#913: FILE: drivers/media/platform/atmel/atmel-sama5d2-isc.c:61:
+extern const struct v4l2_async_notifier_operations isc_async_ops;
This should be in a header.
WARNING: externs should be avoided in .c files
#915: FILE: drivers/media/platform/atmel/atmel-sama5d2-isc.c:63:
+extern irqreturn_t isc_interrupt(int irq, void *dev_id);
WARNING: externs should be avoided in .c files
#916: FILE: drivers/media/platform/atmel/atmel-sama5d2-isc.c:64:
+extern int isc_pipeline_init(struct isc_device *isc);
WARNING: externs should be avoided in .c files
#917: FILE: drivers/media/platform/atmel/atmel-sama5d2-isc.c:65:
+extern int isc_clk_init(struct isc_device *isc);
WARNING: externs should be avoided in .c files
#918: FILE: drivers/media/platform/atmel/atmel-sama5d2-isc.c:66:
+extern void isc_subdev_cleanup(struct isc_device *isc);
WARNING: externs should be avoided in .c files
#919: FILE: drivers/media/platform/atmel/atmel-sama5d2-isc.c:67:
+extern void isc_clk_cleanup(struct isc_device *isc);
Should also be in a header. No need to extern when just declaring the
function prototype, BTW.
CHECK: Alignment should match open parenthesis
#964: FILE: drivers/media/platform/atmel/atmel-sama5d2-isc.c:112:
+ subdev_entity = devm_kzalloc(dev,
+ sizeof(*subdev_entity), GFP_KERNEL);
Please fix this as well.
Regards,
Hans
Powered by blists - more mailing lists