| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20190605125634.7042-4-dmurphy@ti.com>
Date: Wed, 5 Jun 2019 07:56:32 -0500
From: Dan Murphy <dmurphy@...com>
To: <jacek.anaszewski@...il.com>, <pavel@....cz>, <broonie@...nel.org>,
<lgirdwood@...il.com>
CC: <lee.jones@...aro.org>, <linux-leds@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, Dan Murphy <dmurphy@...com>
Subject: [PATCH v6 3/5] regulator: lm363x: Add support for LM36274
Adding regulator support for the LM36274 backlight driver.
This device can leverage this existing code as the functionality
and registers are common enough between the LM36274 and the LM363x
series of devices.
Signed-off-by: Dan Murphy <dmurphy@...com>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@...il.com>
---
v6 - Squash patch 1 of the series into this patch. Add flexibility when setting
the EXT_EN GPIO bit for the LM3633 and LM36274 based on comments made in
patch 1 - https://lore.kernel.org/patchwork/patch/1077408/
drivers/regulator/Kconfig | 2 +-
drivers/regulator/lm363x-regulator.c | 78 ++++++++++++++++++++++++++--
2 files changed, 75 insertions(+), 5 deletions(-)
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 6c37f0df9323..34e03691dd00 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -363,7 +363,7 @@ config REGULATOR_LM363X
tristate "TI LM363X voltage regulators"
depends on MFD_TI_LMU
help
- This driver supports LM3631 and LM3632 voltage regulators for
+ This driver supports LM3631, LM3632 and LM36274 voltage regulators for
the LCD bias.
One boost output voltage is configurable and always on.
Other LDOs are used for the display module.
diff --git a/drivers/regulator/lm363x-regulator.c b/drivers/regulator/lm363x-regulator.c
index e02fdd1dd092..12b6007a23ad 100644
--- a/drivers/regulator/lm363x-regulator.c
+++ b/drivers/regulator/lm363x-regulator.c
@@ -37,6 +37,11 @@
#define LM3632_VBOOST_MIN 4500000
#define LM3632_VLDO_MIN 4000000
+/* LM36274 */
+#define LM36274_BOOST_VSEL_MAX 0x3f
+#define LM36274_LDO_VSEL_MAX 0x34
+#define LM36274_VOLTAGE_MIN 4000000
+
/* Common */
#define LM363X_STEP_50mV 50000
#define LM363X_STEP_500mV 500000
@@ -217,6 +222,51 @@ static const struct regulator_desc lm363x_regulator_desc[] = {
.enable_reg = LM3632_REG_BIAS_CONFIG,
.enable_mask = LM3632_EN_VNEG_MASK,
},
+
+ /* LM36274 */
+ {
+ .name = "vboost",
+ .of_match = "vboost",
+ .id = LM36274_BOOST,
+ .ops = &lm363x_boost_voltage_table_ops,
+ .n_voltages = LM36274_BOOST_VSEL_MAX,
+ .min_uV = LM36274_VOLTAGE_MIN,
+ .uV_step = LM363X_STEP_50mV,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .vsel_reg = LM36274_REG_VOUT_BOOST,
+ .vsel_mask = LM36274_VOUT_MASK,
+ },
+ {
+ .name = "ldo_vpos",
+ .of_match = "vpos",
+ .id = LM36274_LDO_POS,
+ .ops = &lm363x_regulator_voltage_table_ops,
+ .n_voltages = LM36274_LDO_VSEL_MAX,
+ .min_uV = LM36274_VOLTAGE_MIN,
+ .uV_step = LM363X_STEP_50mV,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .vsel_reg = LM36274_REG_VOUT_POS,
+ .vsel_mask = LM36274_VOUT_MASK,
+ .enable_reg = LM36274_REG_BIAS_CONFIG_1,
+ .enable_mask = LM36274_EN_VPOS_MASK,
+ },
+ {
+ .name = "ldo_vneg",
+ .of_match = "vneg",
+ .id = LM36274_LDO_NEG,
+ .ops = &lm363x_regulator_voltage_table_ops,
+ .n_voltages = LM36274_LDO_VSEL_MAX,
+ .min_uV = LM36274_VOLTAGE_MIN,
+ .uV_step = LM363X_STEP_50mV,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .vsel_reg = LM36274_REG_VOUT_NEG,
+ .vsel_mask = LM36274_VOUT_MASK,
+ .enable_reg = LM36274_REG_BIAS_CONFIG_1,
+ .enable_mask = LM36274_EN_VNEG_MASK,
+ },
};
static struct gpio_desc *lm363x_regulator_of_get_enable_gpio(struct device *dev, int id)
@@ -229,9 +279,11 @@ static struct gpio_desc *lm363x_regulator_of_get_enable_gpio(struct device *dev,
*/
switch (id) {
case LM3632_LDO_POS:
+ case LM36274_LDO_POS:
return gpiod_get_index_optional(dev, "enable", 0,
GPIOD_OUT_LOW | GPIOD_FLAGS_BIT_NONEXCLUSIVE);
case LM3632_LDO_NEG:
+ case LM36274_LDO_NEG:
return gpiod_get_index_optional(dev, "enable", 1,
GPIOD_OUT_LOW | GPIOD_FLAGS_BIT_NONEXCLUSIVE);
default:
@@ -239,6 +291,27 @@ static struct gpio_desc *lm363x_regulator_of_get_enable_gpio(struct device *dev,
}
}
+static int lm363x_regulator_set_ext_en(struct regmap *regmap, int id)
+{
+ int ext_en_mask = 0;
+
+ switch (id) {
+ case LM3632_LDO_POS:
+ case LM3632_LDO_NEG:
+ ext_en_mask = LM3632_EXT_EN_MASK;
+ break;
+ case LM36274_LDO_POS:
+ case LM36274_LDO_NEG:
+ ext_en_mask = LM36274_EXT_EN_MASK;
+ break;
+ default:
+ return -ENODEV;
+ }
+
+ return regmap_update_bits(regmap, lm363x_regulator_desc[id].enable_reg,
+ ext_en_mask, ext_en_mask);
+}
+
static int lm363x_regulator_probe(struct platform_device *pdev)
{
struct ti_lmu *lmu = dev_get_drvdata(pdev->dev.parent);
@@ -263,10 +336,7 @@ static int lm363x_regulator_probe(struct platform_device *pdev)
if (gpiod) {
cfg.ena_gpiod = gpiod;
-
- ret = regmap_update_bits(regmap, LM3632_REG_BIAS_CONFIG,
- LM3632_EXT_EN_MASK,
- LM3632_EXT_EN_MASK);
+ ret = lm363x_regulator_set_ext_en(regmap, id);
if (ret) {
gpiod_put(gpiod);
dev_err(dev, "External pin err: %d\n", ret);
--
2.21.0.5.gaeb582a983
Powered by blists - more mailing lists