linux-kernel - Re: [PATCH] arm64: dts: qcom: sdm845-mtp: Add Truly display

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <CAFp+6iH_pNPVs5QA2fa87ZoVngEFJ362sDivAWzzWPC6K0S5mA@mail.gmail.com>
Date:   Wed, 5 Jun 2019 10:56:49 +0530
From:   Vivek Gautam <vivek.gautam@...eaurora.org>
To:     Bjorn Andersson <bjorn.andersson@...aro.org>
Cc:     Andy Gross <agross@...nel.org>,
        David Brown <david.brown@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        linux-arm-msm <linux-arm-msm@...r.kernel.org>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@...r.kernel.org>,
        open list <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] arm64: dts: qcom: sdm845-mtp: Add Truly display

On Tue, May 14, 2019 at 2:39 AM Bjorn Andersson
<bjorn.andersson@...aro.org> wrote:
>
> Bring in the Truly display and enable the DSI channels to make the
> mdss/gpu probe, even though we're lacking LABIB, preventing us from
> seeing anything on the screen.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@...aro.org>
> ---

Looks good to me and work well too with a wip lab-ibb driver change.

Reviewed-by: Vivek Gautam <vivek.gautam@...eaurora.org>
Tested-by: Vivek Gautam <vivek.gautam@...eaurora.org>

>  arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 79 +++++++++++++++++++++++++
>  1 file changed, 79 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
> index 02b8357c8ce8..83198a19ff57 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
> +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
> @@ -352,6 +352,77 @@
>         status = "okay";
>  };
>
> +&dsi0 {
> +       status = "okay";
> +       vdda-supply = <&vdda_mipi_dsi0_1p2>;
> +
> +       qcom,dual-dsi-mode;
> +       qcom,master-dsi;
> +
> +       ports {
> +               port@1 {
> +                       endpoint {
> +                               remote-endpoint = <&truly_in_0>;
> +                               data-lanes = <0 1 2 3>;
> +                       };
> +               };
> +       };
> +
> +       panel@0 {
> +               compatible = "truly,nt35597-2K-display";
> +               reg = <0>;
> +               vdda-supply = <&vreg_l14a_1p88>;
> +
> +               reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
> +               mode-gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>;
> +
> +               ports {
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +
> +                       port@0 {
> +                               reg = <0>;
> +                               truly_in_0: endpoint {
> +                                       remote-endpoint = <&dsi0_out>;
> +                               };
> +                       };
> +
> +                       port@1 {
> +                               reg = <1>;
> +                               truly_in_1: endpoint {
> +                                       remote-endpoint = <&dsi1_out>;
> +                               };
> +                       };
> +               };
> +       };
> +};
> +
> +&dsi0_phy {
> +       status = "okay";
> +       vdds-supply = <&vdda_mipi_dsi0_pll>;
> +};
> +
> +&dsi1 {
> +       status = "okay";
> +       vdda-supply = <&vdda_mipi_dsi1_1p2>;
> +
> +       qcom,dual-dsi-mode;
> +
> +       ports {
> +               port@1 {
> +                       endpoint {
> +                               remote-endpoint = <&truly_in_1>;
> +                               data-lanes = <0 1 2 3>;
> +                       };
> +               };
> +       };
> +};
> +
> +&dsi1_phy {
> +       status = "okay";
> +       vdds-supply = <&vdda_mipi_dsi1_pll>;
> +};
> +
>  &gcc {
>         protected-clocks = <GCC_QSPI_CORE_CLK>,
>                            <GCC_QSPI_CORE_CLK_SRC>,
> @@ -365,6 +436,14 @@
>         clock-frequency = <400000>;
>  };
>
> +&mdss {
> +       status = "okay";
> +};
> +
> +&mdss_mdp {
> +       status = "okay";
> +};
> +
>  &qupv3_id_1 {
>         status = "okay";
>  };
> --
> 2.18.0
>


-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation