linux-kernel - [PATCH v2 3/3] arm64: dts: qcom: sdm845-mtp: Specify UFS device-reset GPIO

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Wed,  5 Jun 2019 18:02:49 -0700
From:   Bjorn Andersson <bjorn.andersson@...aro.org>
To:     Andy Gross <agross@...nel.org>
Cc:     Linus Walleij <linus.walleij@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Alim Akhtar <alim.akhtar@...sung.com>,
        Avri Altman <avri.altman@....com>,
        Pedro Sousa <pedrom.sousa@...opsys.com>,
        "James E.J. Bottomley" <jejb@...ux.ibm.com>,
        "Martin K. Petersen" <martin.petersen@...cle.com>,
        Evan Green <evgreen@...omium.org>,
        linux-arm-msm@...r.kernel.org, linux-gpio@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-scsi@...r.kernel.org
Subject: [PATCH v2 3/3] arm64: dts: qcom: sdm845-mtp: Specify UFS device-reset GPIO

Specify the UFS device-reset gpio, so that the controller will issue a
reset of the UFS device.

Tested-by: John Stultz <john.stultz@...aro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@...aro.org>
---

Changes since v1:
- None

 arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
index 2e78638eb73b..d116a0956a9c 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
@@ -388,6 +388,8 @@
 &ufs_mem_hc {
 	status = "okay";
 
+	device-reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
+
 	vcc-supply = <&vreg_l20a_2p95>;
 	vcc-max-microamp = <600000>;
 };
-- 
2.18.0